It is impossible to pass Microsoft 70 412 vce exam without any help in the short term. Come to Testking soon and find the most advanced, correct and guaranteed Microsoft exam 70 412 practice questions. You will get a surprising result by our Refresh Configuring Advanced Windows Server 2012 Services practice guides.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-412 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-412 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-412-exam-dumps.html
Q111. HOTSPOT
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
The domain contains two domain controllers. The domain controllers are configured as shown in the following table.
On DC1, you create an Active Directory-integrated zone named Zone1. You verify that
Zone1 replicates to DC2.
You use DNSSEC to sign Zone1.
You discover that the updates to Zone1 fail to replicate to DC2.
You need to ensure that Zone1 replicates to DC2.
What should you configure on DC1?
To answer, select the appropriate tab in the answer area.
Answer:
Q112. HOTSPOT
Your network contains three application servers that run Windows Server 2012 R2. The application servers have the Network Load Balancing (NLB) feature installed.
You create an NLB cluster that contains the three servers.
You plan to deploy an application named App1 to the nodes in the cluster. App1 uses TCP port 8080 and TCP port 8081.
Clients will connect to App1 by using HTTP and HTTPS. When clients connect to App1 by using HTTPS, session state information will be retained locally by the cluster node that responds to the client request.
You need to configure a port rule for Appl.
Which port rule should you use?
To answer, select the appropriate rule in the answer area.
Answer:
Q113. Your network contains an Active Directory domain named contoso.com. The domain
contains two member servers named Server1 and Server2.
You install the DHCP Server server role on Server1 and Server2. You install the IP
Address Management (IPAM) Server feature on Server1.
You notice that you cannot discover Server1 or Server2 in IPAM.
You need to ensure that you can use IPAM to discover the DHCP infrastructure.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On Server2, create an IPv4 scope.
B. On Server1, run the Add-IpamServerInventory cmdlet.
C. On Server2, run the Add-DhcpServerInDc cmdlet
D. On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet.
E. On Server1, uninstall the DHCP Server server role.
Answer: B,C
Explanation:
B. The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory.
C. The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD). A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network.
Reference: Add-IpamServerInventory; Add-DhcpServerInDC
Q114. HOTSPOT
Your network contains one Active Directory domain.
The domain contains an enterprise certification authority (CA).
You need to ensure that members of a group named Group1 can issue certificates for the
User certificate template only.
Which two tabs should you use to perform the configuration? To answer, select the
appropriate tabs in the answer area.
Answer:
Q115. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.
Which IPV6 scope prefix should you use?
A. 2001:123:4567:890A::
B. FE80:123:4567::
C. FF00:123:4567:890A::
D. FD00:123:4567::
Answer: D Explanation:
Explanation/Reference:
* A unique local address (ULA) is an IPv6 address in the block fc00::/7, defined in RFC
4193. It is the approximate IPv6 counterpart of the IPv4 private address.
The address block fc00::/7 is divided into two /8 groups:
/ The block fc00::/8 has not been defined yet.
/ The block fd00::/8 is defined for /48 prefixes, formed by setting the 40 least-significant bits
of the prefix to a randomly generated bit string.
* Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address
ranges:
/ They are not allocated by an address registry and may be used in networks by anyone
without outside involvement.
/ They are not guaranteed to be globally unique.
/ Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot
be delegated in the global DNS.
Reference: RFC 4193
Q116. You have 30 servers that run Windows Server 2012 R2.
All of the servers are backed up daily by using Windows Azure Online Backup.
You need to perform an immediate backup of all the servers to Windows Azure Online
Backup.
Which Windows PowerShell cmdlets should you run on each server?
A. Get-OBPolicy | StartOBBackup
B. Start-OBRegistration | StartOBBackup
C. Get-WBPolicy | Start-WBBackup
D. Get-WBBackupTarget | Start-WBBackup
Answer: A
Explanation:
This example starts a backup job using a policy.
Windows PowerShell
PS C:> Get-OBPolicy | Start-OBBackup
Incorrect:
Not B. Registers the current computer to Windows Azure Backup.
Not C. Not using Azure
Not D. Not using Azure
Reference: Start-OBBackup
http://technet.microsoft.com/en-us/library/hh770406(v=wps.620).aspx
Q117. Your company has two offices. The offices are located in Seattle and Montreal.
The network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named Server1 and Server2. Server1 is located in the Seattle office. Server2 is located in the Montreal office. All servers run Windows Server 2012 R2.
You need to create a DHCP scope for video conferencing in the Montreal office. The scope must be configured as shown in the following table.
Which Windows PowerShell cmdlet should you run?
A. Add-DhcpServerv4SuperScope
B. Add-DhcpServerv4MulticastScope
C. Add-DHCPServerv4Policy
D. Add-DchpServerv4Scope
Answer: B
Explanation:
The Add-DhcpServerv4MulticastScope cmdlet adds a multicast scope on the Dynamic Host Configuration Protocol (DHCP) server.
Note: IPv4 multicast addresses are defined by the leading address bits of 1110, originating from the classful network design of the early Internet when this group of addresses was designated as Class D. The Classless Inter-Domain Routing (CIDR) prefix of this group is 224.0.0.0/4. The group includes the addresses from 224.0.0.0 to 239.255.255.255.
Reference: Add-DhcpServerv4MulticastScope
Q118. Your network contains an Active Directory forest. The forest contains two domains named contoso.com and fabrikam.com. The functional level of the forest is Windows Server 2003.
You have a domain outside the forest named adatum.com.
You need to configure an access solution to meet the following requirements:
* Users in adatum.com must be able to access resources in contoso.com.
* Users in adatum.com must be prevented from accessing resources in fabrikam.com.
* Users in both contoso.com and fabrikam.com must be prevented from accessing resources in adatum.com.
What should you create?
A. a one-way realm trust from contoso.com to adatum.com
B. a one-way realm trust from adatum.com to contoso.com
C. a one-way external trust from contoso.com to adatum.com
D. a one-way external trust from adatum.com to contoso.com
Answer: C
Explanation:
The contoso domain must trust the adatum domain.
Note: In a One-way: incoming trust, users in your (trusted) domain can be authenticated in
the other (trusting) domain. Users in the other domain cannot be authenticated in your
domain.
Incorrect:
Not A, not B. Use realm trusts to form a trust relationship between a non-Windows
Kerberos realm and a Windows Server domain.
Not D. The resources that are to be shared are in the contoso domain.
Reference: Trust types
Q119. You have a server named Server1.
You install the IP Address Management (IPAM) Server feature on Server1.
You need to provide a user named User1 with the ability to set the access scope of all the DHCP servers that are managed by IPAM. The solution must use the principle of least privilege.
Which user role should you assign to User1?
A. DNS Record Administrator Role
B. IPAM DHCP Reservations Administrator Role
C. IPAM Administrator Role
D. IPAM DHCP Administrator Role
Answer: D
Explanation:
The IPAM DHCP administrator role completely manages DHCP servers.
C:UsersChaudhryDesktop1.jpg
Reference: What's New in IPAM
Q120. HOTSPOT
Your network contains two Web servers named Server1 and Server2. Both servers run Windows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster contains an application named App1 that is accessed by using the URL http://app1.contoso.com.
You deploy a new server named Server3 that runs Windows Server 2012 R2. The contoso.com DNS zone contains the records shown in the following table.
You need to add Server3 to the NLB cluster.
What command should you run?
To answer, select the appropriate options in the answer area.
Answer:
