Question No. 1
You are a Product Designer working on a modeling tree for the speaker. You create a Table node to retrieve information about the width of the speaker item being configured, and need to set up the Width variable to hold this information. How can you set up the Table node to save information about the item width to the Width variable?
A. Specify that the Width variable must retrieve information from the Table node when creating this variable in the Modeling variables form.
B. Set the Allocation of field group on the Look up tab to Variable and select the Width variable in the Value field.
C. Set the Allocation of field group on the Look up tab to Value and select the Width variable in the Value field.
D. Select the Width variable in the Variable field of the Fields tab
Question No. 2
You are a Product Designer in the Contoso Company responsible for creating a product model for a home theater. You want the users to view the graphical representation of the home theater when they configure it in the Product Builder configuration form. The graphics must change depending on the user’s choices for television and speakers. What are the mandatory steps to set up graphics to display in the Product Builder configuration form and change according to specified requirements? Choose the 2 that apply.
A. In the Generate graphic documents of type field of the Product Builder parameters form, specify which type of graphic documents must be generated.
B. Select variables representing television and speakers on the Overview tab of the Graphic parameters form.
C. Create intervals for the variables representing television and speakers.
D. Set the File name format to %1%2, create the necessary files and name them according to the file name format set.
Question No. 3
You are a Product Designer responsible for creating product models. Your task is to create a model for a home theater. The home theater dimension calculation you plan to implement in the modeling tree is rather complex and depends on a number of factors. If this calculation fails, you want the user to view an error message and to abort the configuration. What must you implement to abort the configuration if the calculation fails?
A. Create an Action rule.
B. Create a Constraint rule.
C. Create a Message node of the error type. It automatically aborts the configuration.
D. It is not necessary to implement anything. In case some calculation fails the configuration is always aborted and a standard error message is displayed.
Question No. 4
You are a Product Designer responsible for creating and maintaining product models. In the Modeling variables form, there is a Projector variable. You want to modify it before it can be used for a new model you work on. But first you must find out in which existing models it is used. How can you obtain such information?
A. Select this variable in the Modeling variables form and click Used by.
B. Create a query in the Modeling variables form.
C. Print the Where-used report.
D. Print the Used by report.
Question No. 5
You are a Product Designer in the Contoso Company responsible for creating a product model for a home theater. The home theater can go with or without a subwoofer. The user can define this by selecting or clearing the Subwoofer check box in the Product Builder configuration form. If the user selects to include a subwoofer, he or she must be able to select the subwoofer model. You want the Subwoofer model field to be visible in the Product Builder configuration form only after the user selects the Subwoofer check box. How can you set this up?
A. Create a table constraint.
B. Create a Constraint rule with coded condition.
C. Set the field properties of the subwoofer model to Hide. Create an Action rule to set the field properties to Allow edit if the Subwoofer check box is selected.
D. Create an Enumerated text variable for the subwoofer model. When adding it to the model, set its priority lower than the priority of the subwoofer variable.
Question No. 6
You are a Product Designer in the Contoso Company. The company opens a new subsidiary in Russi A. The Product Builder configuration forms must be translated to Russian to be used by local employees. How can you make the Product Builder configuration forms available in Russian? Choose the 2 that apply.
A. Add Russian to the Available languages in the Product Builder parameters form.
B. Type the translation in the form that opens after clicking Language texts in the Modeling variables form.
C. Type the translation in the Translation table located under Product Builder > Setup.
D. Type the translation in the form that opens after clicking Language texts in the Variable group form.
Question No. 7
What is the Test button used for when creating nodes in the modeling tree?
A. for verifying the node compatibility with other nodes in the modeling tree
B. for test execution of the modeling tree with the newly created node
C. for generation of the test BOM and route
D. for checking the node syntax
Question No. 8
How can you make a specific price adjustment active when using product model price combinations?
A. Define a price combination rule that specifies when the price adjustment becomes active.
B. Set up trade agreements for the customers to whom the price adjustment applies.
C. Set up currency for this price adjustment using the Price adjustment in currency button.
D. Activate a price adjustment on the Approval tab of the Product Builder parameters form.
Question No. 9
What are the mandatory steps to take to make the user profiles functional? Choose the 2 that apply.
A. Attach user profiles to employees.
B. Assign user profiles to variables.
C. Attach user profiles to Microsoft Dynamics AX users.
D. Activate user profiles in the Product Builder parameters form.
Question No. 10
Which items can be made configurable with Product Builder?
A. any BOM items
B. any items of the Item or BOM type
C. any items with the Configurable check box selected
D. any items that have configuration dimension
Question No. 11
Which of the following is a prerequisite for configuring an item through the Enterprise Portal?
A. A Web form for item configuring must be generated from Product Builder.
B. A Web form for item configuring must be created through the SharePoint.
C. A static user dialog and approval dialog must be generated.
D. A product model of an item must have configurations to reuse.
Question No. 12
You are a Product Designer in the Contoso Company responsible for creating a product model for the speaker item. You want Microsoft Dynamics AX to generate a new configuration dimension for this item whenever it is configured. The generated configuration dimension ID must consist of the number sequence and value selected by the user for the speaker model. Which steps must you take to set up the generating of the configuration dimension? Choose the 2 that apply.
A. In the Generate items and dimensions form, set the Format field to %1####.
B. Select the speaker type variable on the Configuration variables tab of the Generate items and dimensions form.
C. Select the Generate configuration check box in the Generate items and dimensions form. Set the Format field to %1.
D. Select the Generate configuration check box in the Product Builder parameters form.
Question No. 13
You are a Product Designer working on a model for a television. In the Product Builder configuration form of this model, the user can select among three television types: LCD, CRT, and Plasma. You need to make appropriate items included in the BOM depending on the users choice for television type. How can you implement including specific items depending on the selected television type?
A. Create a Constraint validation rule and set it up not to include items that are irrelevant for the television type selected.
B. Create an Action rule and specify which operations must be included in the case of selecting each television type.
C. Create an appropriate default route and insert it into the modeling tree.
D. Create a Switch node with Case nodes corresponding to each television type. Attach appropriate BOM nodes under each of them.
Question No. 14
You are a Product Designer in the Contoso Company responsible for working on a product model for a projector. In the Product Builder configuration form, the user can select whether to include the extension cord or not. If the extension cord is included, the user can also specify its length. You want the Extension cord check box to appear above the Extension cord length field in the Product Builder configuration form. How can you achieve this?
A. Click Test model. In the Product Builder configuration form, set up the field order using the drag-and-drop feature.
B. Create a validation rule to make the extension cord check box appear above the extension cord length field.
C. In the Product model form, click Grouping and use the Up and Down buttons to define the field order within the group.
D. In the Priority field of the Product model form, type 10 for the extension cord variable and 20 for the extension cord length variable.
Question No. 15
When a table constraint is created, a table and fields are selected from this table to be used for the constraint. Next to each field the variable name must be specified. What is the purpose for doing this?
A. A variable is declared that will be used in the table constraints code.
B. After the constraint is saved, a variable with the specified name will be automatically created.
C. The variable holds values from this field if the Variable/Value option button is set to Variable.
D. Using this variable, the system searches for the appropriate record in the table.
Question No. 16
For which of the following purposes can you use the Description field in the Variable groups form?
A. To have its content displayed as a tab name in the Product Builder configuration form.
B. To have its content displayed as a help text in the Product Builder configuration form.
C. To hold product model designer's comments about the modeling variable.
D. To hold notes to the Production Department about how the item is to be produced.
Question No. 17
What is the result of selecting prompt in the Reuse configurations field of the Product Builder parameters form?
A. Prompt(s) appear, asking you to reuse similar Configuration dimensions of modeling enabled items.
B. Information displays, notifying you about existing similar BOMs and routes and that they can be selected for reuse.
C. You can view the list of all configurations generated by the Product Builder with configuration details and to reuse them.
D. You can select to reuse any existing configuration rules.
Question No. 18
You are a Product Designer in the Contoso Company. You receive feedback from an Order Processor that there are potential conflicts between validation rules in one of your models. How can you locate the conflicts?
A. Check the rule syntax. Rule conflicts will be detected during this process.
B. Include all the rules into global rule set and validate them.
C. Test the model and use rule debugger.
D. Open the rules and click Debug.
Question No. 19
For what purpose is the Product model wizard used?
A. To create new product models and to edit existing models.
B. To only create headers for new product models.
C. To create new product models, including the model header and content.
D. To create new product models; the only act that cannot be performed using the wizard is creating validation rules.
Question No. 20
How can you make the Configure line button display when creating a production order?
A. Click Functions in the production order lines.
B. Set this up in the Production parameters form.
C. Set this up in the Product Builder parameters form.
D. Select a modeling enabled item in the order line.