Guaranteed 1Z0-597 Guidance 2021

NEW QUESTION 1
As part of our test procedure plan, you need to confirm that savecore is configured correctly. Which test should you use?

• A. Explore Data Collector Test
• B. Solaris VTS Test
• C. Solaris Crash Dump Test
• D. Savecore Test

Answer: C

NEW QUESTION 2
Identify two specification of the Enterprise Installation Standard (EIS) for Basic Solaris.

• A. It defines the process for downloading Solaris and related patches from the Oracle support web site
• B. It requires the Installer to use the appropriate his Installation checklists when Installing Solaris
• C. It mandates that Installers use the EIS-DVD during the Installation process
• D. It provide the guidelines and patch levels for Installing Solaris 8, 9, 10, or 11

Answer: B

NEW QUESTION 3
You have configured DNS and have determined that the services processor serial number for your target server is 0641AMA007. What is the host name of this server?

• A. SUN-0641AMA007
• B. SUNCMM0-0641AMA007
• C. SUNCMM1-0641AMA007
• D. SUNSP-0641AMA007

Answer: A

NEW QUESTION 4
How many XAUI (10 GbE Attachment Unit Interfaces) ports are provided per SPARC T4 processor?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 5
Which two statements are true regarding the Stream processing Unit (SPU) on the SPARC T4 processor?

• A. The SPU is implemented within each processor core.
• B. The SPU is shared across all cores on the processor.
• C. The SPU operates at the same clock speed as the core.
• D. The SPU archives wire-speed performance for encryption only.

Answer: C

Explanation:

Reference:http://www.oracle.com/technetwork/server-storage/sun-netra- carrier/documentation/o11-155-netra-t4-architecture-1451053.pdf(page 8, see stream- processing unit)

NEW QUESTION 6
Why are Electrostatic Discharge (ESD) "softfailures" the most serious type of failures?

• A. The damage is not immediately noticed or detected.
• B. The damage is immediate and easily detected.
• C. The damage corrupts firmware.
• D. The damage results in the failure of the entire system.

Answer: A

NEW QUESTION 7
If a fault includes a uuid and sunw-msg-id property, then the fault was detected by which of the following?

• A. SunVTS
• B. POST
• C. Solaris Predictive Self-Healing
• D. Oracle ILOM

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E19839-01/820-2181-15/820-2181-15.pdf(page 22, see the second row, second column of the table)

NEW QUESTION 8
On a SPARC T4 server running Oracle Solaris 10, you execute the following command:
# lucreate –c sol_run –m /:/dev/dsk/c0t4d0s0:ufs -m /usr:/dev/dsk/c0t4d0s3:ufs –n sol_tan What is the result?

• A. Create a new boot environment named “sol_tan” and name the active boot environment “sol_run”.
• B. Create a new boot environment named “sol_named” and name the active boot environment “sol_tan”.
• C. Replaces the existing boot environment “sol_run” with “sol_tan”
• D. Replaces the existing boot environment “sol_tan” with “sol_run”

Answer: A

NEW QUESTION 9
When preparing to update the firmware, which two statements are true?

• A. If performed via the ILOM interface, the firmware file should reside on the system from which the browser is launched.
• B. If performed via the ILOM web interface, a TFTP server is required.
• C. If performed via the ILOM CLI, a TFTP server is required.
• D. Firmware updates can only be performed via the ILOM CLI.

Answer: B

NEW QUESTION 10
On SPARC T4-2 server, if the memory riser has four dual-rank DIMMs, its bandwidth is approximately 94% of the possible maximum. If the memory riser has only two dual-rank DIMMs, what is the approximate bandwidth as a percent of the total bandwidth?

• A. 29%
• B. 35%
• C. 41%
• D. 47%

Answer: D

NEW QUESTION 11
In order to consolidate the applications on a SPARC T4 server, you require virtual machines that run an independent operating system instance. Which virtualization technology did you select?

• A. Oracle Solaris containers
• B. Dynamic Domains
• C. Oracle VM Server for SPARC
• D. Oracle VirtualBox

Answer: C

Explanation:

Reference:http://www.oracle.com/technetwork/server-storage/sun-sparc-enterprise/documentation/o11-090-sparc-t4-arch-496245.pdf(page 25, first para)

NEW QUESTION 12
You are unable to add an Oracle ILOM user account, what is one possibility that would cause this issue?

• A. You need to add SSH keys to the system before creating additional user accounts.
• B. You do not have the user management role enabled.
• C. You do not have the host control role enabled.
• D. You have exceeded the maximum number of 5 user accounts.

Answer: B

NEW QUESTION 13
In the OpenBoot PROM environment, you used the“show-children” commandto list the physicaldrives on a specific RAID controller.Theoutput is below. Which command creates a RAID0 volume with targets 9 and a?

• A. 9 a create-raid0-volume
• B. Create raid-volume = 0 9 a
• C. 9 a create-raid-volume = 0
• D. Create raid0-volume = 9 a

Answer: A

Explanation:

Reference:http://docs.oracle.com/cd/E19836-01/E20746/z40001f31395336.html(see step 3)

NEW QUESTION 14
According to the Enterprise Installation Standards (EIS), what is the recommended minimum amount of memory that should be allocated to the control domain?

• A. 2 GB
• B. 3 GB
• C. 4 GB
• D. 6 GB

Answer: A

NEW QUESTION 15
Using the logical domainconfiguration below,what is the domain and virtual CPU corresponding to physical CPU number 5?

• A. domain primary, virtual CPU number 0
• B. domain primary, virtual CPU number 1
• C. domain ldg2, virtual CPU number 0
• D. domain ldg1, virtual CPU number 1

Answer: D

NEW QUESTION 16
In general, when labeling a cable, the host connection should follow the format: <system name> <board no.> <slot no.> and .

• A. <port no.>
• B. <insertion point>
• C. <cable no.>
• D. <rack no.>

Answer: C

NEW QUESTION 17
The runs its own embedded operating system.

• A. Logical Domains Manager
• B. Oracle ILOM service processor
• C. OpenBoot PROM
• D. Hardware Management Pack

Answer: B

Explanation:

Reference:http://docs.oracle.com/cd/E18476_01/doc.220/e18478/ilom.htm(ILOM overview, see the para immediately after the bulleted points)

NEW QUESTION 18
When replacing the motherboard, how do you preserve the server’s original host ID and MAC address?

• A. Move the System Configuration PROM from the old motherboard to the new motherboard.
• B. Back up the service processor configuration details from the old system, and restore on the new system.
• C. Move the service processor card from the old system to the new system.
• D. For security, it not possible to preserve the server’s host ID and MAC address.

Answer: A

NEW QUESTION 19
After the Logical Domains Manager has been installed, what happens to the original system and instance of Oracle Solaris?

• A. It becomes the control domain
• B. It becomes the first guest domain
• C. It is automatically configured as a service domain
• D. Nothing Logical domains are created on top of the original instance of Oracle Solaris.

Answer: A

Explanation:

Reference:http://docs.oracle.com/cd/E37707_01/html/E29665/newinstallldoms.html(first
para on the page)

NEW QUESTION 20
Which command lists dynamically reconfigurable hardware resources and shows their operational status?

• A. dmesg
• B. ldm ls
• C. fmadm –al
• D. cfgadm –al

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E22985_01/html/E22986/z40019011297337.html(See step 2)

NEW QUESTION 21
During installation, what happens if both power supplies are not cabled at the same time on a SPARC T4-2 server?

• A. Nothing
• B. OpenBoot PROM is disabled
• C. The service processor will not power on
• D. The Oracle ILOM will signal a fault

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E23075_01/html/E23076/z40004b81409406.html(see the second note on the page)

NEW QUESTION 22
You have the Oracle ILOM keyswitch_state=standby. What is the Impact ?

• A. The system will power on and run power-on self-test (POST), but Oracle Solaris will not boot.
• B. The system will power on and run power-on self-test (POST), but no flash updates can be made.
• C. The system cannot power on.
• D. The system powers on, but does not run power-on self-test (POST) or boot Oracle Solaris.

Answer: D

NEW QUESTION 23
You plan on creating a RAID volume to mirror the system disks. After you have selected a controller, what fcode command should be run to list the physical drivers on the controller?

• A. Show-devs
• B. Show-volume
• C. Show-children
• D. Show-drives

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E22985_01/pdf/E22989.pdf(page 23)

NEW QUESTION 24
The DIMM slots on a SPARC T4-1 server are currently 1/4 full (i.e., 4 out of 16 DIMM slots are populated).You plan to add four additional DIMMs. How are they installed?

• A. Two DIMMs are inserted into the open slots on branch 1 (BOB1) and 3 (BOB3).
• B. One DIMM is added per branch, into any open slot.
• C. One DIMM is added per branch, into a specific slot.
• D. Two DIMMs are inserted into the open slots on branch 0 (BOB0) and (BOB2).

Answer: C

NEW QUESTION 25
......