Proper study guides for Renew Cisco Deploying Cisco Wireless Enterprise Networks certified begins with Cisco 300-365 preparation products which designed to deliver the Top Quality 300-365 questions by making you pass the 300-365 test at your first time. Try the free 300-365 demo right now.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-365 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-365 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-365-exam-dumps.html
2021 Mar 300-365 exam
Q11. A network engineer is viewing the QBSS information in a packet sniff. Which two QBSS characteristics are crucial for successful troubleshooting? (Choose two.)
A. When only WMM is enabled, information element number 1 QBSS Load information element is sent out in the beacons and probe responses.
B. When only WMM is enabled, information element number 3 QBSS Load information element is sent out in the beacons and probe responses.
C. When the client CAC limit is supported, information element number 2 is sent out in the beacons and probe responses on the bg radios.
D. When the client CAC limit is supported, information element number 1 is sent out in the beacons and probe responses on the bg radios.
E. When only WMM is enabled, information element number 2 QBSS Load information element is sent out in the beacons and probe responses.
Answer: D,E
Q12. A customer has implemented a wireless network that requires tuning for High Density applications utilizing the RX-SOP feature. They are experiencing a high noise floor (average of -65 dBm) and expect that to decrease significantly. A sampling of radios determine that most Access Points have neighbors on the same channel at a power level of -75 dBm. Which value should the customer use to start tuning RX-SOP?
A. -60 dBm
B. -65dBm
C. -70 dBm
D. -75 dBm
E. -80 dBm
Answer: C
Q13. A customer has implemented a N+1 high availability plan in a multistory building. All APs on odd numbered floors are set as primary to WLC-A and all APs on even numbered floors are set as primary to WLC-8. Which two problems are likely to arise from this design? (Choose two)
A. inconsistent CleanAir data due to multiple WLCs
B. floor-to-floor bleed-through that causes intercontroller roaming delays
C. AVC inconsistency due to multiple mobility group members
D. legacy device compatibility with multiple WLC configuration that causes disconnects
E. unpredictable AP loading during a WLC failure
Answer: A,C
Q14. A customer requires that the remote site be able to utilize local servers when the AP is in WAN-down (standalone mode). Which AP mode must be configured on the wireless controller?
A. SE-Connect
B. Monitor
C. Local
D. FlexConnect
E. Sniffer
F. Rogue Detector
Answer: D
Q15. A downstream packet containing a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination?
A. No outer CAPWAP or inner QoS tagging is applied.
B. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP.
C. The outer CAPWAP CoS is marked and capped while the inner DSCP maintains the original marking.
D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value.
Answer: C
Leading 300-365 exam fees:
Q16. A customer has "quiet" wireless clients that use static IP addresses. Which two WLAN configurations are required for these wireless clients to connect properly? (Choose two.)
A. Disable DHCP address assignment required.
B. Enable passive client.
C. Disable allow AAA override.
D. Enable static IP tunneling.
E. Disable DHCP server override.
Answer: A,E
Q17. After a wireless deployment, users report that wireless voice clients are experiencing an unacceptable amount of delay while roaming during a call on the Cisco Unified 7925 Series phones. The customer environment consists of multiple controllers, all running 7.4.121.0 code, operating in a centralized deployment. What configuration issue is most likely contributing to the problem?
A. The authentication should be set to WPA2-PSK to allow for 802.11n speeds for the Cisco Unified 7925 phones.
B. The access points on that floor are all on one controller and should be load balanced evenly across multiple controllers.
C. The access points for that floor are salt and peppered across multiple controllers and should be moved to the primary controller.
D. The wireless phones are operating in the 2 4 GHz band and should be configured for the 5 GHz band.
Answer: B
Q18. What address do PIM routers listen to in order to automatically discover the best RP for each multicast group?
A. 224.0.0.13
B. 224.0.1.39
C. 224.0.0.14
D. 224.0.140
Answer: D
Q19. Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?
A. show ap config general Cisco_AP
B. show wlan wlan_id
C. show flexconnect summary
D. show flexconnect group detail
Answer: B
Q20. Refer to Exhibit.
What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.)
A. APSD
B. 802.11a
C. 802.11e
D. WMM
E. 802.11r
F. SIFS
Answer: C,D
