Exam Code: 400-101 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: CCIE Routing and Switching (v5.0)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 400-101 Exam.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-101-exam-dumps.html
2021 Apr 400-101 free question
Q331. Refer to the exhibit.
What kind of problem is detected?
A. The packet types that are being sent are unknown.
B. The maximum MTU size that can be used is 1492.
C. Waiting for a reply timed out.
D. Fragmentation starts to occur when the MTU of 1472 is reached.
Answer: B
Q332. Which BGP feature allows a router to maintain its current BGP configuration while it advertises a different AS number to new connections?
A. local-AS
B. next-hop-self
C. allow-AS in
D. soft reset
Answer: A
Explanation:
The local-AS feature allows a router to appear to be a member of a second autonomous system (AS), in addition to its real AS. This feature can only be used for true eBGP peers. The local-AS feature is useful if ISP-A purchases ISP-B, but ISP-B's customers do not want to modify any peering arrangements or configurations. The local-AS feature allows routers in ISP-B to become members of ISP-A's AS. At the same time, these routers appear to their customers to retain their ISP-B AS number.
Reference: http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13761-39.html
Q333. Refer to the exhibit.
R1, R2, and R3 have full network connectivity to each other, but R2 prefers the path through R3 to reach network 172.17.1.0/24. Which two actions can you take so that R2 prefers the path through R1 to reach 172.17.1.0/24? (Choose two.)
A. Set the reference bandwidth to 10000 on R1, R2, and R3.
B. Configure the cost on the link between R1 and R3 to be greater than 100 Mbps.
C. Set the reference bandwidth on R2 only.
D. Configure a manual bandwidth statement with a value of 1 Gbps on the link between R1 and R3.
E. Modify the cost on the link between R1 and R2 to be greater than 10 Gbps.
F. Configure a manual bandwidth statement with a value of 100 Mbps on the link between R1 and R2.
Answer: A,B
Explanation:
By default, the reference bandwidth used in Cisco routers is 100Mbps, so FastEthernet and above will have a cost of 1, so a gigabit interface and 10GE interface will be equal with a fastethernet. This is not ideal. If we change the reference bandwidth to 100000 then the faster links will be used. Changing the reference bandwidth needs to be done on all routers in the OSPF network. Increasing the cost on the R1-R3 link will also cause the traffic to take the more direct route.
Q334. Refer to the exhibit.
Why is R2 unable to ping the loopback interface of R4?
A. The local preference is too high.
B. The weight is too low.
C. The next hop is not reachable from R2.
D. The route originated from within the same AS.
Answer: C
Explanation:
Before a BGP speaker installs a route to a network in the main IP routing table, the router must know how to reach the next hop that is used to get to that network. Route reachability is verified by searching for a route to the next hop in the main IP routing table. Unlike IGP routing protocols, such as EIGRP and OSPF, which assume that a route is reachable if they learned it through a valid adjacency, BGP does not install routes that it cannot verify as reachable. If a route to the next hop for a BGP network is found in the main IP routing table, BGP assumes that the network is reachable, and that the particular BGP route might be stored in the main IP routing table. If the router receives a route to a network that is not reachable, that route continues to be stored in the incoming BGP table, adj-RIB-In, and might be seen using the show ip bgp command, but is not placed in the main IP routing table.
Reference: https://www.informit.com/library/content.aspx?b=CCIE_Practical_Studies_II&seqNum=75
Q335. Refer to the exhibit.
If IS-IS is configured utilizing default metrics, what is the cost for Router 4 to reach the 10.2.2.0/24 network?
A. 1
B. 20
C. 30
D. 63
Answer: C
Explanation:
By default, every link is an IS-IS network has a metric of 10.
Renovate 400-101 testing engine:
Q336. Which statement about how a CE router is used in an MPLS VPN is true?
A. It is located on the customer premises, where it peers and exchanges routes with the provider edge router.
B. It is located on the provider premises, where it peers and exchanges routes with the customer edge router.
C. It is located on the customer premises, but it is fully controlled by the provider, which provides a full routing table to the customer.
D. It is located on the provider premises, and it routes only MPLS label traffic.
Answer: A
Q337. Which two options are EEM policies? (Choose two.)
A. applets
B. event detectors
C. scripts
D. syslogs
E. actions
Answer: A,C
Q338. Which two statements about TCP are true? (Choose two.)
A. TCP option must be divisible by 32.
B. It has a 16-bit window size.
C. Its maximum data offset is fifteen 32-bit words.
D. It has a 32-bit window size.
E. Its maximum data offset is ten 32-bit words.
F. It has a 32-bit checksum field.
Answer: B,C
Q339. Refer to the exhibit.
Which two statements are true? (Choose two.)
A. This is the output of the show ip ospf command.
B. This is the output of the show ip protocols command.
C. This router is an ABR.
D. This router is an ASBR.
E. Authentication is not configured for the area.
Answer: A,E
Explanation:
The following is sample output from the show ip ospf command when entered without a specific OSPF process ID with no authentication.
Router# show ip ospf
Routing Process "ospf 201" with ID 10.0.0.1 and Domain ID 10.20.0.1
Supports only single TOS(TOS0) routes
Supports opaque LSA
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs
LSA group pacing timer 100 secs
Interface flood pacing timer 55 msecs
Retransmission pacing timer 100 msecs
Number of external LSA 0. Checksum Sum 0x0
Number of opaque AS LSA 0. Checksum Sum 0x0
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 2. 2 normal 0 stub 0 nssa
External flood list length 0
Area BACKBONE(0)
Number of interfaces in this area is 2
Area has no authentication
SPF algorithm executed 4 times
Area ranges are
Number of LSA 4. Checksum Sum 0x29BEB
Number of opaque link LSA 0. Checksum Sum 0x0
Number of DCbitless LSA 3 Number of indication LSA 0
Number of DoNotAge LSA 0 Flood list length 0
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/command/iro-cr-book/ospf-s1.html#wp8749965360
Q340. Refer to the exhibit.
Which two statements about the R1 configuration are true? (Choose two.)
A. The IP TTL value is copied to the MPLS field during label imposition.
B. The structure of the MLPS network is hidden in a traceroute.
C. The LDP session interval and hold times are configured for directly connected neighbors.
D. R1 protects the session for 86400 seconds.
E. All locally assigned labels are discarded.
Answer: B,D
