Act now and download your Microsoft 70-680 test today! Do not waste time for the worthless Microsoft 70-680 tutorials. Download Latest Microsoft TS:Windows 7,Configuring exam with real questions and answers and begin to learn Microsoft 70-680 with a classic professional.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
2021 Mar 70-680 test
Q321. - (Topic 2)
A user reports that he is unable to start his computer. He provides the following information:
. The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
. The user cannot locate his BitLocker recovery key.
You need to start Windows 7 on the computer. The solution must use the minimum amount of administrative effort.
What should you do?
A. From the BIOS, disable the Trusted Platform Module (TPM).
B. Start the computer from the Windows 7 installation media and select Repair your computer.
C. Start the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK.
D. Start the computer from the Windows 7 installation media and select Install now.
Answer: D
Explanation:
No recovery key = no recovery. Time to install.
Any other option defeats the whole point of encrypting it.
Encrypted volumes are locked when the encryption key is not available. When the operating system volume is locked, you can boot only to recovery mode. In recovery mode, you can enter the BitLocker password or you can attach the USB device that has the recovery key stored and restart the computer. Once you enter the recovery password or key, you can boot your computer normally.
The following events trigger recovery mode:
* The boot environment changes. This could include one of the boot files being modified.
* TPM is disabled or cleared.
* An attempt is made to boot without the TPM, PIN, or USB key being provided.
* You attach a BitLocker-encrypted operating system volume to another computer.
Q322. - (Topic 1)
You are creating an unattend answer file for automatic Windows 7 installation. What can you use to do this? Choose two.
A. The Windows SIM tool in Windows AIK
B. Microsoft Notepad
C. The Deployment Workbench MDT tool
D. Sysprep.exe
Answer: A,B
Q323. - (Topic 3)
Your corporate network contains a Remote Desktop Gateway (RD Gateway) server named Server1 and a Remote Desktop Session Host (RD Session Host) server named Server2.
You have a computer named Computer1 that runs Windows 7. You use Computer1 from home.
You need to access Server2 from Computer1.
What should you do?
A. Run Mstsc.exe /admin /v:server2:443.
B. Run Mstsc.exe /console /v:server2:8080.
C. Create a Remote Desktop Connection and modify the Connect from anywhere settings.
D. Create a Remote Desktop Connection and modify the Server authentication settings.
Answer: C
Explanation:
To connect using an RD Gateway server, navigate to the Advanced tab of the Remote Desktop Connection Properties dialog box and click Settings under Connect From Anywhere. This opens the RD Gateway Server Settings dialog box. This dialog box allows you to specify RD Gateway settings, including whether or not you want the RD Gateway to be detected automatically, whether to use a specific RD Gateway server, as shown in the firgure, or you can specify Do Not Use an RD Gateway Server, which is the default setting.
Q324. - (Topic 3)
You have a computer that runs Windows 7.
You need to prevent users from installing a specific removable drive on the computer.
You connect the removable drive to the computer.
What should you do before you create a Group Policy?
A. From Device Manager, identify the device class GUID.
B. From Device Manager, identify the device location information.
C. From System Information, identify the device INF file.
D. From System Information, identify the device driver file name.
Answer: A
Explanation:
The device class GUID is used to identify the device. Prevent Windows 7 from installing or updating device drivers whose device setup class GUIDs you specify. This policy overrides any other policy that permits update or installation.
Q325. - (Topic 2)
You need to increase the size of a paging file.
What should you do?
A. From Disk Management, shrink the boot partition.
B. From Disk Management, shrink the system partition.
C. From System, modify the Advanced system settings.
D. From System, modify the System protection settings.
Answer: C
Explanation:
1. Click Start, right-click My Computer, and then click Properties.
2. In the System Properties dialog box, click the Advanced tab.
3. In the Performance pane, click Settings.
4. In the Performance Options dialog box, click the Advanced tab.
5. In the Virtual memory pane, click Change.
6. Change the Initial size value and the Maximum size value to a higher value, click Set, and then click OK.
7. Click OK to close the Performance Options dialog box, and then click OK to close the System Properties dialog box.
Adjusting Paging File SizeFor virtual-memory support, Windows 2000 creates one paging file called Pagefile.sys on the disk or volume on which the operating system is installed. The default size is equal to 1.5 times the amount of physical memory. A small paging file limits what can be stored and might exhaust your virtual memory for applications. If you are short on RAM, more paging occurs, which generates extra activity for your disks and slows response times for the system.Expand the Default SizeExpanding the default size of the paging file can increase performance if applications are consuming virtual memory and the full capacity of the existing file is being used. To determine how large your paging file should be based on your system workload, monitor the Process (_Total)Page File Bytes counter. This indicates, in bytes, how much of the paging file is being used. A large paging file uses disk storage space, so do not create a large paging file on a disk that is very active (for example, one that services heavy application or network activity) or one that has limited space. Change the file size gradually and test performance until you find the optimal balance between paging file and disk space usage. The operating system requires a minimum of 5 MB of free space on a disk. For more information, see "Examining and Tuning Disk Performance" in this book. Before increasing the file size, make sure you have adequate disk space, particularly on your servers.
Most up-to-date 70-680 exam guide:
Q326. - (Topic 2)
You have a virtual hard disk (VHD) file.
You need to view the files in the VHD. The solution must prevent users that log on to What should you do?
A. From Disk Management, Attach VHD as read only.
B. From Disk Management, Convert the VHD to GPT disk.
C. From Windows Explorer, modify the permissions of the VHD file.
D. From Windows Explorer, modify the read-only attribute of the VHD file.
Answer: C
Q327. - (Topic 1)
Your network contains an Active Directory domain. All servers run Windows Server 2008 R2 and are members of the domain. All servers are located in the main office.
You have a portable computer named Computer1 that runs Windows 7. Computer1 is joined to the domain and is located in a branch office.
A file server named Server1 contains a shared folder named Share1.
You need to configure Computer1 to meet the following requirements:
. Minimize network traffic between the main office and the branch office
. Ensure that Computer1 can only access resources in Share1 while it is connected to the network.
What should you do?
A. On Computer1, enable offline files.
B. On Computer1, enable transparent caching.
C. On Server1, configure DirectAccess.
D. On Server1, configure Share1 to be available offline.
Answer: B
Explanation:
Transparent Caching When you enable transparent caching, Windows 7 keeps a cached copy of all files that a user opens from shared folders on the local volume. The first time a user opens the file, the file is stored in the local cache. When the user opens the file again, Windows 7 checks the file to ensure that the cached copy is up to date and if it is, opens that instead. If the copy is not up to date, the client opens the copy hosted on the shared folder, also placing it in the local cache. Using a locally cached copy speeds up access to files stored on file servers on remote networks from the client. When a user changes a file, the client writes the changes to the copy of the file stored on the shared folder. When the shared folder is unavailable, the transparently cached copy is also unavailable. Transparent caching does not attempt to keep the local copy synced with the copy of the file on the remote file server as the Offline Files feature does. Transparent caching works on all files in a shared folder, not just those that you have configured to be available offline.
Q328. - (Topic 1)
You have a computer that runs Windows 7. The computer connects to the corporate network by using a VPN connection.
You need to ensure that you can access the Internet when the VPN connection is active. The solution must prevent Internet traffic from being routed through the VPN connection.
What should you do?
A. Configure a static DNS server address.
B. Configure a static IP address and default gateway.
C. Configure the security settings of the VPN connection.
D. Configure the advanced TCP/IP settings of the VPN connection.
Answer: D
Explanation:
To prevent the default route from being created In the properties of the TCP/IP protocol of the dial-up connection object, in the Advanced TCP/IP Settings dialog box, click the General tab, and then clear the Use default gateway on remote network check box.
Q329. - (Topic 2)
You are installing a 64bit edition of Windows 7. During the installation, you receive an error message when you attempt to add mass storage driver. You need to complete the installation of Windows 7. You start the computer from the Windows 7 installation media. What should you do next?
A. From the Install Windows dialog box, click RESCAN.
B. From the Install Windows dialog box, click DRIVE OPTIONS (ADVANCED)
C. From the Advanced Boot options menu, select SAFE MODE.
D. From the Advanced Boot options menu, select DISABLE DRIVER SIGNATURE ENFORCEMENT.
Answer: B
Q330. - (Topic 3)
You need to prevent a custom application from connecting to the Internet.
What should you do?
A. From Windows Firewall, add a program.
B. From Windows Defender, modify the Allowed items list.
C. From Windows Firewall with Advanced Security, create an inbound rule.
D. From Windows Firewall with Advanced Security, create an outbound rule.
Answer: D
Explanation:
Outbound Rule Outbound rules allow you to block and allow traffic that originates on the computer from traveling out to the network.Creating WFAS Rules The process for configuring inbound rules and outbound rules is essentially the same: In the WFAS console, select the node that represents the type of rule that you want to create and then click New Rule. This opens the New Inbound (or Outbound) Rule Wizard. The first page, allows you to specify the type of rule that you are going to create. You can select between a program, port, predefined, or custom rule. The program and predefined rules are similar to what you can create using Windows Firewall. A custom rule allows you to configure a rule based on criteria not covered by any of the other options. You would create a custom rule if you wanted a rule that applied to a particular service rather than a program or port. You can also use a custom rule if you want to create a rule that involves both a specific program and a set of ports. For example, if you wanted to allow communication to a specific program on a certain port but not other ports, you would create a custom rule.QUESTION NO: 290 You have a computer that runs Windows 7. The network contains a monitoring server named Server1. The computer runs a monitoring service named Service1. Service1 uses Remote Procedure Calls (RPCs). You need to ensure that Service1 can receive requests from Server1.
What should you do?
A. From Windows Firewall with Advanced Security, create a predefined rule.
B. From Windows Firewall with Advanced Security, create a custom rule.
C. From Network and Sharing Center, modify the network location settings.
D. From Network and Sharing Center, modify the advanced sharing settings.
Answer: B
Creating WFAS Rules The process for configuring inbound rules and outbound rules is essentially the same: In the WFAS console, select the node that represents the type of rule that you want to create and then click New Rule. This opens the New Inbound (or Outbound) Rule Wizard. The first page, allows you to specify the type of rule that you are going to create. You can select between a program, port, predefined, or custom rule. The program and predefined rules are similar to what you can create using Windows Firewall. A custom rule allows you to configure a rule based on criteria not covered by any of the other options. You would create a custom rule if you wanted a rule that applied to a particular service rather than a program or port. You can also use a custom rule if you want to create a rule that involves both a specific program and a set of ports. For example, if you wanted to allow communication to a specific program on a certain port but not other ports, you would create a custom rule.
