Want to know Exambible HPE0-S56 Exam practice test features? Want to lear more about Building HPE Hybrid IT Solutions certification experience? Study Certified HPE0-S56 answers to Up to the minute HPE0-S56 questions at Exambible. Gat a success with an absolute guarantee to pass HPE0-S56 (Building HPE Hybrid IT Solutions) test on your first attempt.
NEW QUESTION 1
A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?
- A. HPE ProLiant DL560 Gen10 with LFF SAS drives
- B. HPE ProLiant DL380 Gen10 with LFF SAS drives
- C. HPE ProLiant ML110 with SFF SAS drives
- D. HPE ProLiant DL560 Gen9 with SFF SAS drives
Answer: B
NEW QUESTION 2
A customer needs to connect two switches without VLANs or Spanning Tree. To which mode should the switches be set?
- A. Routing Mode
- B. Bridge Mode
- C. Switch Mode
- D. Gateway Mode
Answer: D
NEW QUESTION 3
A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they report that the server is not online. They call you for remote support. The IP address on the production network cannot be reached. You are evaluating the probable root causes of this issue.
According to the troubleshooting methodology, what are next two steps? (Select two)
- A. Remote console into the ToR switch to check the server's port configuration.
- B. Log in to iLO to see if the server hardware and NIC are online and configured correctly.
- C. Use OneView to see f the server firmware is up-to-date
- D. Run insight Diagnostics on the Server
- E. Use Microsoft Remote Desktop or VNC to check the server's NIC and IP address configuration
Answer: BD
NEW QUESTION 4
Which statement is true regarding configuring memory in an HPE ProLiant server?
- A. LRDIMMS in 64 GB and 128 GB can be mixed.
- B. RDIMM and LRDIMMs can be mixed in one system.
- C. Different capability DIMMs of the same speed can be mixed.
- D. The first CPU memory channel must be fully populated before the second.
Answer: C
NEW QUESTION 5
You are troubleshooting an HPE Proliant ML350 Gen server. You determine that the active ROM is corrupt and the system has not automatically switched to the redundant ROM. You need to manually switch the ROM.
What should you do?
- A. Select the backup ROM in the BIOS.
- B. Reset the iLO controller
- C. Change the position of the system maintenance switch options.
- D. Move the system maintenance jumper to pins one and two.
Answer: C
NEW QUESTION 6
A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer’s needs?
- A. ProLiant ML
- B. ProLiant DL
- C. ProLiant BL
- D. ProLiant MicroServer
Answer: A
NEW QUESTION 7
A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer’s requirements?
- A. Nimble CS1000
- B. Nimble SFA
- C. Nimble AF1000
- D. Nimble AF5000
Answer: B
NEW QUESTION 8
Match each workload profile description with the corresponding profile. (Select all that apply.)
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
Missing Critical - Large number of database operations
Transactional Application Processing - Trades performance for reliability General Peak Frequency Compute - Maximize processor speed
NEW QUESTION 9
A customer needs to share files among their Microsoft Windows servers cost-effectively and requires disaster support
Which native StoreEasy features win address the customer's need? (select two) recovery
- A. Dual controller architecture
- B. DFS-Replication
- C. Microsoft Azure support
- D. Enhanced data deduplication
- E. File classification infrastructure
Answer: CD
NEW QUESTION 10
In which layer of the OSI model would you find an IP address?
- A. Application
- B. Network
- C. Physical
- D. Data link
Answer: B
NEW QUESTION 11
You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?
- A. System
- B. IML
- C. iLO
- D. Audit
Answer: C
NEW QUESTION 12
A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer’s needs?
- A. OneView
- B. Insight Remote Support
- C. InfoSight
- D. Insight Online
Answer: A
NEW QUESTION 13
A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality.
Which HPE product family will meet this customer’s needs?
- A. Arista
- B. Altoline
- C. Aruba
- D. FlexFabric
Answer: D
NEW QUESTION 14
A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?
- A. Jumbo frames
- B. Oversubscription
- C. SMB Direct
- D. Remote Data Memory Access
Answer: A
NEW QUESTION 15
You are working on a server, and you notice that the blue UID light on the server is flashing slowly. What does this indicate?
- A. The host server is in standby mode
- B. The system is being managed remotely
- C. The host has rebooted and is performing POST actions
- D. The system is experiencing power issues
Answer: B
NEW QUESTION 16
You are installing additional components to a server.
Which HPE resource provides Quickspecs that verify the compatibility of the server hardware with the server?
- A. iQuote Universal
- B. Smart Selling tool
- C. Product Bulletin
- D. SPOCK
Answer: C
NEW QUESTION 17
You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)
- A. Use out-of-band management with a dedicated management connection
- B. Use in-band management with an IP address and subnet mask that is reachable on the management network
- C. Use out-of-band management and keep the default settings
- D. Use in-band management and configure the AUX0 interface for scheme authentication
Answer: AB
NEW QUESTION 18
A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch?
- A. 3m OM3 Fiber Optic Cables
- B. 3m Cat 6A Copper Cables
- C. 3m Direct Attached Copper Cables
- D. 3m OM2 Fiber optic cables
Answer: C
NEW QUESTION 19
A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Multi-protocol connectivity Flash-accelerated storage Low-cost midline SAS drives
Which HPE storage platform will meet these requirements?
- A. StoreVirtual VSA
- B. MSA
- C. SimpliVity
- D. StoreEasy
Answer: B
NEW QUESTION 20
You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.
Which HPE management solution meets the customer’s needs?
- A. Centralized Management Console
- B. Intelligent Resilient Framework
- C. Intelligent Management Center
- D. InfoSight
Answer: C
NEW QUESTION 21
Match the HPE Tool with its use case. Select all that apply.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation:
One Config Advanced (OCA) - Estimate the power and cooling requirements and weight for a rack of equipment
Single Point of Connectivity Knowledge (SPOCK) - Check compatibility of storage components Products and solutions Now (PSNow) - Download a technical presentation for a DL380 Gen10
NEW QUESTION 22
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?
- A. at the top of the rack with the cables running between the RETMA rails
- B. horizontally on extension bars mounted directly to the frame for improved clearance
- C. in the bottom bay of the rack with the outlets facing the front
- D. vertically, side by side on both sides of the rack with the outlets facing the center
Answer: D
NEW QUESTION 23
What has HPE implemented in the HPE ProLiant Gen10 to prevent malware?
- A. jitter smoothing
- B. application isolation control
- C. persistent memory
- D. silicon root of trust
Answer: D
NEW QUESTION 24
A company plans to purchase new HPE servers. The company needs to maximize local storage capacity within the servers.
Which HPE servers should the company install?
- A. ProLiant BL460c Gen10
- B. ProLiant DL380 Gen10
- C. ProLiant ML110 Gen 9
- D. ProLiant DL360 Gen 9
Answer: B
NEW QUESTION 25
......
Recommend!! Get the Full HPE0-S56 dumps in VCE and PDF From Simply pass, Welcome to Download: https://www.simply-pass.com/-exam/HPE0-S56-dumps.html (New 140 Q&As Version)
