Master the 156-315.81 Check Point Certified Security Expert R81 content and be ready for exam day success quickly with this Ucertify 156-315.81 exam answers. We guarantee it!We make it a reality and give you real 156-315.81 questions in our CheckPoint 156-315.81 braindumps.Latest 100% VALID CheckPoint 156-315.81 Exam Questions Dumps at below page. You can use our CheckPoint 156-315.81 braindumps and pass your exam.
Online 156-315.81 free questions and answers of New Version:
NEW QUESTION 1
Which of the following is NOT an alert option?
- A. SNMP
- B. High alert
- C. Mail
- D. User defined alert
Answer: B
NEW QUESTION 2
Besides fw monitor, what is another command that can be used to capture packets?
- A. arp
- B. traceroute
- C. tcpdump
- D. ping
Answer: C
NEW QUESTION 3
Firewall polices must be configured to accept VRRP packets on the GAiA platform if it Firewall software. The Multicast destination assigned by the internet Assigned Number Authority (IANA) for VRRP is:
- A. 224.0.0.18
- B. 224 00 5
- C. 224.0.0.102
- D. 224.0.0.22
Answer: A
NEW QUESTION 4
Automatic affinity means that if SecureXL is running, the affinity for each interface is automatically reset every
- A. 15 sec
- B. 60 sec
- C. 5 sec
- D. 30 sec
Answer: B
NEW QUESTION 5
Vanessa is firewall administrator in her company. Her company is using Check Point firewall on a central and several remote locations which are managed centrally by R77.30 Security Management Server. On central location is installed R77.30 Gateway on Open server. Remote locations are using Check Point UTM-1570 series appliances with R75.30 and some of them are using a UTM-1-Edge-X or Edge-W with latest available firmware. She is in process of migrating to R81.
What can cause Vanessa unnecessary problems, if she didn’t check all requirements for migration to R81?
- A. Missing an installed R77.20 Add-on on Security Management Server
- B. Unsupported firmware on UTM-1 Edge-W appliance
- C. Unsupported version on UTM-1 570 series appliance
- D. Unsupported appliances on remote locations
Answer: A
NEW QUESTION 6
After the initial installation on Check Point appliance, you notice that the Management-interface and default gateway are incorrect.
Which commands could you use to set the IP to 192.168.80.200/24 and default gateway to 192.168.80.1.
- A. set interface Mgmt ipv4-address 192.168.80.200 mask-length 24set static-route default nexthop gateway address 192.168.80.1 onsave config
- B. set interface Mgmt ipv4-address 192.168.80.200 255.255.255.0add static-route 0.0.0.0. 0.0.0.0 gw 192.168.80.1 onsave config
- C. set interface Mgmt ipv4-address 192.168.80.200 255.255.255.0set static-route 0.0.0.0. 0.0.0.0 gw 192.168.80.1 onsave config
- D. set interface Mgmt ipv4-address 192.168.80.200 mask-length 24add static-route default nexthop gateway address 192.168.80.1 onsave config
Answer: A
NEW QUESTION 7
What are possible Automatic Reactions in SmartEvent?
- A. Mai
- B. SNMP Trap, Block Sourc
- C. Block Event Activity, External Script
- D. Web Mai
- E. Block Destination, SNMP Tra
- F. SmartTask
- G. Web Mail, Block Servic
- H. SNMP Tra
- I. SmartTask, Geo Protection
- J. Web Mail, Forward to SandBlast Appliance, SNMP Trap, External Script
Answer: A
NEW QUESTION 8
One of major features in R81 SmartConsole is concurrent administration.
Which of the following is NOT possible considering that AdminA, AdminB and AdminC are editing the same Security Policy?
- A. A lock icon shows that a rule or an object is locked and will be available.
- B. AdminA and AdminB are editing the same rule at the same time.
- C. A lock icon next to a rule informs that any Administrator is working on this particular rule.
- D. AdminA, AdminB and AdminC are editing three different rules at the same time.
Answer: C
NEW QUESTION 9
Fill in the blank: Browser-based Authentication sends users to a web page to acquire identities using _______.
- A. User Directory
- B. Captive Portal and Transparent Kerberos Authentication
- C. Captive Portal
- D. UserCheck
Answer: B
NEW QUESTION 10
Secure Configuration Verification (SCV), makes sure that remote access client computers are configured in accordance with the enterprise Security Policy. Bob was asked by Alice to implement a specific SCV configuration but therefore Bob needs to edit and configure a specific Check Point file. Which location file and directory is true?
- A. $FWDIR/conf/client.scv
- B. $CPDIR/conf/local.scv
- C. $CPDIR/conf/client.svc
- D. $FWDIR/conf/local.scv
Answer: D
Explanation:
https://sc1.checkpoint.com/documents/R81.10/WebAdminGuides/EN/CP_R81.10_RemoteAccessVPN_AdminG
NEW QUESTION 11
What is true of the API server on R81.10?
- A. By default the API-server is activated and does not have hardware requirements.
- B. By default the API-server is not active and should be activated from the WebUI.
- C. By default the API server is active on management and stand-alone servers with 16GB of RAM (or more).
- D. By default, the API server is active on management servers with 4 GB of RAM (or more) and on stand-alone servers with 8GB of RAM (or more).
Answer: D
NEW QUESTION 12
Which view is NOT a valid CPVIEW view?
- A. IDA
- B. RAD
- C. PDP
- D. VPN
Answer: C
NEW QUESTION 13
What are the available options for downloading Check Point hotfixes in Gala WebUI (CPUSE)?
- A. Manually, Scheduled, Automatic
- B. Manually, Automatic, Disabled
- C. Manually, Scheduled, Disabled
- D. Manually, Scheduled, Enabled
Answer: A
Explanation:
Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_AdminWebAdminGuide/ html_frameset.htm?topic=documents/R77/CP_R77_Gaia_AdminWebAdminGuide/112109
NEW QUESTION 14
How many users can have read/write access in Gaia at one time?
- A. Infinite
- B. One
- C. Three
- D. Two
Answer: B
NEW QUESTION 15
Which 3 types of tracking are available for Threat Prevention Policy?
- A. SMS Alert, Log, SNMP alert
- B. Syslog, None, User-defined scripts
- C. None, Log, Syslog
- D. Alert, SNMP trap, Mail
Answer: B
NEW QUESTION 16
SandBlast has several functional components that work together to ensure that attacks are prevented in real-time. Which the following is NOT part of the SandBlast component?
- A. Threat Emulation
- B. Mobile Access
- C. Mail Transfer Agent
- D. Threat Cloud
Answer: B
NEW QUESTION 17
The Firewall kernel is replicated multiple times, therefore:
- A. The Firewall kernel only touches the packet if the connection is accelerated
- B. The Firewall can run different policies per core
- C. The Firewall kernel is replicated only with new connections and deletes itself once the connection times out
- D. The Firewall can run the same policy on all cores.
Answer: D
Explanation:
On a Security Gateway with CoreXL enabled, the Firewall kernel is replicated multiple times. Each replicated copy, or instance, runs on one processing core. These instances handle traffic concurrently, and each instance is a complete and independent inspection kernel. When CoreXL is enabled, all the kernel instances in the Security Gateway process traffic through the same interfaces and apply the same security policy.
NEW QUESTION 18
How many versions, besides the destination version, are supported in a Multi-Version Cluster Upgrade?
- A. 1
- B. 3
- C. 2
- D. 4
Answer: B
NEW QUESTION 19
Which of the following processes pulls the application monitoring status from gateways?
- A. cpd
- B. cpwd
- C. cpm
- D. fwm
Answer: A
NEW QUESTION 20
What will SmartEvent automatically define as events?
- A. Firewall
- B. VPN
- C. IPS
- D. HTTPS
Answer: C
NEW QUESTION 21
......
Thanks for reading the newest 156-315.81 exam dumps! We recommend you to try the PREMIUM DumpSolutions.com 156-315.81 dumps in VCE and PDF here: https://www.dumpsolutions.com/156-315.81-dumps/ (563 Q&As Dumps)
