Verified 1Y0-230 Exam Questions and Answers 2021

1Y0-230 Exam Questions and Answers for Citrix certification, Real Success Guaranteed with Updated 1Y0-230 Exam Questions and Answers. 100% PASS 1Y0-230 Citrix NetScaler 12 Essentials and Unified Gateway exam Today!

Also have 1Y0-230 free dumps questions for you:

NEW QUESTION 1
Which three NetScaler features can a Citrix Administrator use for default syntax policies? (Choose three.)

  • A. SSL
  • B. Rewrite
  • C. Integrated caching
  • D. Protection
  • E. Responder

Answer: ABE

Explanation: Reference
https://docs.citrix.com/zh-cn/netscaler/11/appexpert/policies-and-expressions/ns-pi-intro-pol-exp-wrapper-con/n

NEW QUESTION 2
Scenario: A Citrix Administrator is performing a disaster recovery test and decided to fail over the NetScaler high availability (HA) pair appliances. The administrator noticed that the failover is NOT working as expected in item text, and the Secondary NetScaler is NOT taking over as Primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue with the NetScalers?

  • A. HA monitoring is enabled on a disabled interface of the Primary Node
  • B. HA monitoring is enabled on an interface of the Secondary Node that shows as ENABLED, DOWN
  • C. Independent network configuration (INC) mode is enabled
  • D. HA heartbeats are only seen on some enabled interfaces of the Secondary Node

Answer: D

NEW QUESTION 3
Which NetScaler feature can a Citrix Administrator use to create a customer footer for a NetScaler Gateway login page?

  • A. Rewrite
  • B. SmartAccess
  • C. HTTP Callout
  • D. Responder

Answer: A

NEW QUESTION 4
Which three statements are true when comparing a Simple Access Control List (ACL) to an Extended ACL? (Choose three.)

  • A. Extended ACLs have priorities
  • B. Simple ACLs can be modified
  • C. Extended ACLs apply first
  • D. Simple ACLs can be based on the Source and Destination IP address
  • E. Simple ACLs can bridge traffic
  • F. Simple ACLs are based on the Source IP address only
  • G. Simple ACLs apply first

Answer: ADG

NEW QUESTION 5
Where should a Citrix Administrator configure SmartControl restrictions?

  • A. NetScaler Gateway
  • B. XenDesktop Delivery Controller
  • C. NetScaler Gateway, XenDesktop Delivery Controller and StoreFront
  • D. StoreFront and XenDesktop Delivery Controller

Answer: A

NEW QUESTION 6
Which type of NetScaler Service Monitor can a Citrix Administrator use to test a three-way handshake between the NetScaler and the back-end server?

  • A. UDP
  • B. PING
  • C. TCP
  • D. LDAP

Answer: C

NEW QUESTION 7
Scenario: A Citrix Administrator needs to integrate LDAP for NetScaler system administration using the current Active Directory groups. The administrator created the group on the NetScaler, exactly matching the group name in LDAP.
What can the administrator add next to complete the configuration of the LDAP?

  • A. Users to the group on the NetScaler
  • B. An AAA action to the group
  • C. A command policy to the group to specify the permission level
  • D. A nested group to the new group

Answer: C

NEW QUESTION 8
Which three services can the StoreFront monitor probe to determine the state of the StoreFront server? (Choose three.)

  • A. Default Domain
  • B. Discovery
  • C. Authentication
  • D. Subscription
  • E. Account

Answer: BCE

NEW QUESTION 9
Scenario: A Citrix Administrator needs to configure a group in which Contractors will have limited access to internal resources over the SSL VPN. The Contractors group should be able to access all internal IP Addresses but should NOT be able to open SSH connections to any internal resource.
Which expression should the administrator use to satisfy this scenario?

  • A. REQ.IP.DESTIP = = 192.168.30.0 –netmask 255.255.255.0&&(REQ.TCP.DESTPORT = = 22)Actionset to Allow
  • B. REQ.IP.DESTIP = = 192.168.30.0 –netmask 255.255.255.0&&(REQ.TCP.DESTPORT = = 22)Actionset to Deny
  • C. REQ.IP.DESTIP = = 192.168.30.0 –netmask 255.255.255.0&&(REQ.TCP.DESTPORT = = 80 || REQ.TCP.DESTPORT = = 443)
  • D. REQ.IP.DESTIP = = 192.168.30.0 –netmask 255.255.255.0 || (REQ.TCP.DESTPORT = = 22)Action set to Allow

Answer: D

NEW QUESTION 10
Scenario: A Junior Citrix Administrator needs to create a Content Switching virtual server on a NetScaler high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tries to test the new Content Switching virtual server, but it is NOT working. The senior administrator connects to the HA pair and everything the junior administrator configured is gone.
Why did the NetScalers lose the newly added configurations?

  • A. The NetScaler appliances are NOT at the same firmware version
  • B. The junior administrator connected to the NSIP of the secondary NetScaler in the HA pair
  • C. Both NetScalers in the HA pair restarted overnight, losing the configuration
  • D. The junior administrator made the changes and did NOT force a failover to save the configuration

Answer: C

NEW QUESTION 11
Which two components need to be configured for SmartAccess? (Choose two.)

  • A. Configuration logging
  • B. XenDesktop policies
  • C. XML Trust
  • D. StoreFront server groups

Answer: CD

NEW QUESTION 12
Scenario: A NetScaler has two interfaces as 1/1 and 1/2 with MAC-based Forwarding enabled. Below are the specifications:
-Interface 1/1 and IP 192.168.10.10 is bound to VLAN 10.
-On Interface 1/2 VLAN 20 and VLAN 30 are tagged.
-VLAN 20 is bound to IP 192.168.20.10 and VLAN 30 is bound to 192.168.30.10 The NetScaler receives a packet for VIP 192.168.30.30 on interface 1/1.
Which interface of NetScaler will send a reply back in this environment?

  • A. Interface 1/1
  • B. NetScaler will drop the packet received on interface 1/1
  • C. Interface 1/2
  • D. Netscaler will reply on interfaces 1/1 and 1/2

Answer: D

NEW QUESTION 13
Scenario: A Citrix Administrator is deploying a NetScaler device and would like to add the NTP server to this appliance. Currently, the NTP service is configured at 192.168.55.54.
Which command-line interface command can the administrator use to complete this task?

  • A. Add ntp server 192.168.55.54
  • B. Add server ntp 192.168.55.54
  • C. Add servicegroup NTP UDP
  • D. Add service NTP 192.168.55.54 UDP 123

Answer: A

NEW QUESTION 14
A Citrix Administrator needs to configure a NetScaler high availability (HA) pair with both NetScalers in different subnets.
What does the administrator need to do for the HA pair to work in different subnets?

  • A. Configure Sync VLAN
  • B. Turn on HA Monitoring on all Interfaces
  • C. Turn on Fail-safe Mode
  • D. Turn on Independent Network Configuration (INC) mode

Answer: D

NEW QUESTION 15
Which NetScaler mode is commonly referred to as ‘inline mode’?

  • A. One-Arm Mode
  • B. Use Source IP (USIP)
  • C. MAC-based Forwarding
  • D. Two-Arm Mode

Answer: D

Explanation: In an inline mode (also called two-arm mode) setup, you connect the NetScaler appliance to the network through multiple VLANs.

NEW QUESTION 16
Which mode does a Citrix Administrator need to configure in order to allow the NetScaler to forward any packets that are NOT destined for an IP address which is NOT configured on NetScaler?

  • A. Layer 3
  • B. USIP
  • C. Layer 2
  • D. MAC-based Forwarding

Answer: C

100% Valid and Newest Version 1Y0-230 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/1Y0-230-dumps.html (New 111 Q&As)