Want to know Actualtests ccna 200 105 Exam practice test features? Want to lear more about Cisco ICND2 Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) certification experience? Study Exact Cisco ccna routing and switching icnd2 200 105 official cert guide answers to Latest ccna routing and switching icnd2 200 105 official cert guide questions at Actualtests. Gat a success with an absolute guarantee to pass Cisco cisco 200 105 (ICND2 Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)) test on your first attempt.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 200-105 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 200-105 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/200-105-exam-dumps.html
P.S. Exact 200-105 guidance are available on Google Drive, GET MORE: https://drive.google.com/open?id=1zYK40K7kFi-jMIoxBFium4FkX2FixrbS
New Cisco 200-105 Exam Dumps Collection (Question 11 - Question 20)
New Questions 11
Which VLAN bridge priority value is assigned by the set span tree root command?
A. 8192
B. 16384
C. 28672
D. 32768
Answer: A
Explanation: 1. Explanations: The set spantree priority command provides a third method to specify the root switch: Source Cisco Website2. Switch-15> (enable)set spantree priority 81923. Spantree 1 bridge priority set to 8192.
New Questions 12
Which two states are the port states when RSTP has converged? (Choose two.)
A. discarding
B. listening
C. learning
D. forwarding
E. disabled
Answer: A,D
Explanation:
Understanding Rapid Spanning Tree Protocol (802.1w)
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cf a.shtml
Port States
There are only three port states left in RSTP that correspond to the three possible operational states. The 802.1D disabled, blocking, and listening states are merged into a unique 802.1w discarding state.
RSTP only has 3 port states which are discarding, learning and forwarding. When RSTP has converged there are only 2 port states left: discarding and forwarding.
New Questions 13
R1# show running-config interface Loopback0
description ***Loopback***
ip address 192.168.1.1 255.255.255.255
ip ospf 1 area 0
!
interface Ethernet0/0
description **Connected to R1-LAN** ip address 10.10.110.1 255.255.255.0
ip ospf 1 area 0
!
interface Ethernet0/1
description **Connected to L2SW**
ip address 10.10.230.1 255.255.255.0
ip ospf hello-interval 25 ip ospf 1 area 0
!
router ospf 1
log-adjacency-changes
R2# show running-config R2
!
interface Loopback0 description **Loopback**
ip address 192.168.2.2 255.255.255.255
ip ospf 2 area 0
!
interface Ethernet0/0
description **Connected to R2-LAN**
ip address 10.10.120.1 255.255.255.0
ip ospf 2 area 0
!
interface Ethernet0/1
description **Connected to L2SW**
ip address 10.10.230.2 255.255.255.0
ip ospf 2 area 0
!
router ospf 2
log-adjacency-changes
R3# show running-config R3
username R6 password CISCO36
!
interface Loopback0 description **Loopback**
ip address 192.168.3.3 255.255.255.255
ip ospf 3 area 0
!
interface Ethernet0/0
description **Connected to L2SW**
ip address 10.10.230.3 255.255.255.0
ip ospf 3 area 0
!
interface Serial1/0
description **Connected to R4-Branch1 office** ip address 10.10.240.1 255.255.255.252
encapsulation ppp ip ospf 3 area 0
!
interface Serial1/1
description **Connected to R5-Branch2 office** ip address 10.10.240.5 255.255.255.252
encapsulation ppp
ip ospf hello-interval 50 ip ospf 3 area 0
!
interface Serial1/2
description **Connected to R6-Branch3 office** ip address 10.10.240.9 255.255.255.252
encapsulation ppp ip ospf 3 area 0
ppp authentication chap
!
router ospf 3
router-id 192.168.3.3
!
R4# show running-config R4
!
interface Loopback0 description **Loopback**
ip address 192.168.4.4 255.255.255.255
ip ospf 4 area 2
!
interface Ethernet0/0
ip address 172.16.113.1 255.255.255.0
ip ospf 4 area 2
!
interface Serial1/0
description **Connected to R3-Main Branch office** ip address 10.10.240.2 255.255.255.252
encapsulation ppp ip ospf 4 area 2
!
router ospf 4
log-adjacency-changes
R5# show running-config R5
!
interface Loopback0 description **Loopback**
ip address 192.168.5.5 255.255.255.255
ip ospf 5 area 0
!
interface Ethernet0/0
ip address 172.16.114.1 255.255.255.0
ip ospf 5 area 0
!
interface Serial1/0
description **Connected to R3-Main Branch office** ip address 10.10.240.6 255.255.255.252
encapsulation ppp ip ospf 5 area 0
!
router ospf 5
log-adjacency-changes
R6# show running-config R6
username R3 password CISCO36
!
interface Loopback0 description **Loopback**
ip address 192.168.6.6 255.255.255.255
ip ospf 6 area 0
!
interface Ethernet0/0
ip address 172.16.115.1 255.255.255.0
ip ospf 6 area 0
!
interface Serial1/0
description **Connected to R3-Main Branch office** ip address 10.10.240.10 255.255.255.252
encapsulation ppp ip ospf 6 area 0
ppp authentication chap
!
router ospf 6
router-id 192.168.3.3
!
An OSPF neighbor adjacency is not formed between R3 in the main office and R6 in the Branch3 office. What is causing the problem?
A. There is an area ID mismatch.
B. There is a PPP authentication issue; the username is not configured on R3 and R6.
C. There is an OSPF hello and dead interval mismatch.
D. The R3 router ID is configured on R6.
Answer: D
New Questions 14
Which protocol is an open standard protocol framework that is commonly used in VPNs, to provide secure end-to-end communications?
A. RSA
B. L2TP
C. IPsec
D. PPTP
Answer: C
Explanation:
Internet Protocol Security (IPsec) is a technology protocol suite for securing Internet Protocol (IP) communications by authenticating and/or encrypting each IP packet of a communication session. IPsec also includes protocols for establishing mutual authentication between agents at the beginning of the session and negotiation of cryptographic keys to be used during the session.
New Questions 15
Which type of interface can negotiate an IP address for a PPPoE client?
A. Ethernet
B. dialer
C. serial
D. Frame Relay
Answer: B
New Questions 16
Which statement about named ACLs is true?
A. They support standard and extended ACLs.
B. They are used to filter usernames and passwords for Telnet and SSH.
C. They are used to filter Layer 7 traffic.
D. They support standard ACLs only.
E. They are used to rate limit traffic destined to targeted networks.
Answer: A
Explanation:
Named Access Control Lists (ACLs) allows standard and extended ACLs to be given names instead of numbers. Unlike in numbered Access Control Lists (ACLs), we can edit Named Access Control Lists. Another benefit of using named access configuration mode is that you can add new statements to the access list, and insert them wherever you like. With the legacy syntax, you must delete the entire access list before reapplying it using the updated rules.
New Questions 17
Refer to the exhibit.
The network associate is configuring OSPF on the Core router. All the connections to the branches should be participating in OSPF. The link to the ISP should NOT participate in OSPF and should only be advertised as the default route. What set of commands will properly configure the Core router?
A. Core(config-router)# default-information originate Core(config-router)# network 10.0.0.0 0.255.255.255 area 0 Core(config-router)# exit
Core(config)# ip route 0.0.0.0 0.0.0.0 10.10.2.14
B. Core(config-router)# default-information originate Core(config-router)# network 10.10.2.13 0.0.0.242 area 0 Core(config-router)# exit
Core(config)# ip route 0.0.0.0 0.0.0.0 10.10.2.14
C. Core(config-router)# default-information originate Core(config-router)# network 10.10.2.16 0.0.0.15 area 0 Core(config-router)# exit
Core(config)# ip route 0.0.0.0 0.0.0.0 10.10.2.14
D. Core(config-router)# default-information originate Core(config-router)# network 10.10.2.32 0.0.0.31 area 0 Core(config-router)# exit
Core(config)# ip route 0.0.0.0 0.0.0.0 10.10.2.14
Answer: C
Explanation:
There are two ways to inject a default route into a normal area.1. If the ASBR already has the default route in its routing table, you can advertise theexisting 0.0.0.0/0 into the OSPF domain with the default-information originate router configuration command.2. If the ASBR doesnu2021t have a default route, you can add the keyword always to the default-information originate command (default-information originate always).This command will advertise a default route into the OSPF domain, regardless of whether it has a route to 0.0.0.0. Another benefit of adding always keyword is that it can add stability to the internetwork. For example, if the ASBR is learning a default route from another routing domain such as RIP and this route is flapping, then without the always keyword, each time the route flaps, the ASBR will send a new Type 5 LSA into the OSPF domain causing some instability inside the OSPF domain. With the always keyword, the ASBR will advertise the default inside the OSPF domain always, In the example shown here, only choice C is correct as the wildcard mask correctly specifies the 10.10.2.16 0.0.0.15 networks, which include all IP addresses in the 10.10.2.16-10.10.2.31 range. In this question we were told that the ISP link should NOT be configured for OSPF, making choice A incorrect. http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801 ec9f0.shtml
New Questions 18
What are two drawbacks of implementing a link-state routing protocol? (Choose two.)
A. the sequencing and acknowledgment of link-state packets
B. the high volume of link-state advertisements in a converged network
C. the requirement for a hierarchical IP addressing scheme for optimal functionality
D. the high demand on router resources to run the link-state routing algorithm
E. the large size of the topology table listing all advertised routes in the converged network
Answer: C,D
New Questions 19
What three pieces of information can be used in an extended access list to filter traffic? (Choose three)
A. VLAN number
B. TCP or UDP port numbers
C. source switch port number
D. source IP address and destination IP address
E. protocol
F. source MAC address and destination MAC address
Answer: B,D,E
New Questions 20
After you configure a GRE tunnel between two networks, the tunnel comes up normally, but workstations on each side of the tunnel cannot communicate. Which reason for the problem is most likely true?
A. The tunnel source address is incorrect.
B. The tunnel destination address is incorrect.
C. The route between the networks is undefined.
D. The IP MTU is incorrect.
E. The distance configuration is missing.
Answer: A
100% Latest Cisco 200-105 Questions & Answers shared by Certleader, Get HERE: https://www.certleader.com/200-105-dumps.html (New 267 Q&As)
