Act now and download your LPI 201-450 test today! Do not waste time for the worthless LPI 201-450 tutorials. Download Update LPI LPIC-2 Exam 201 Part 1 of 2 version 4.5 exam with real questions and answers and begin to learn LPI 201-450 with a classic professional.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for LPI 201-450 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 201-450 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/201-450-exam-dumps.html
New LPI 201-450 Exam Dumps Collection (Question 4 - Question 13)
Q4. Which of the following commands shows capabilities and usable frequencies for the wireless interface wlan0?
A. iw phy pyh0 info
B. iw dev wlan0 info
C. iw dev wlan0 show
D. iw phy wlan0 show
E. iw phy0 show
Answer: A
Q5. Which of the following is a CD-ROM filesystem standard?
A. OSI9660
B. ISO9660
C. SR0FS
D. ISO8859
E. ROM-EO
Answer: B
Q6. What effect does the u2013f option to the update-rc.d command have on files in the /etc/rcX.d/ and /etc/init.d/ directories?
A. It will force the removal of the symlinks in /etc/rcX.d/ even when the links are read only
B. It will remove both the symlinks in /etc/rcX.d/ and the init script in /etc/init.d/
C. It will remove the init script in /etc/init.d/ and the symlinks in /etc/rcX.d/ and update the package information of installed files
D. It will force the removal of symlinks in /etc/rcX.d/ even if the corresponding init script still exists in
/etc/init.d/
Answer: D
Q7. Considering the following kernel IP routing table below, which of the following commands must be used to remove the route to the network 10.10.1.0/24? (Select TWO answers)
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
203.0.113.162 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
172.16.87.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.246.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
10.10.1.0 192.168.246.11 255.255.255.0 UG 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 203.0.113.162 0.0.0.0 UG 0 0 0 ppp0
A. ip net delete 10.10.1.0/24 B. route del 10.10.1.0/24
C. route del -net 10.10.1.0/24
D. route del 10.10.1.0/24 gw 192.168.246.11
E. ip route delete 10.10.1.0/24
Answer: CE
Q8. Which of the following commands will erase the contents of the /dev/sdb3 partition?
A. rm /dev/sdb3
B. dd if=/dev/zero of=/dev/sdb3
C. dd of=/dev/zero if=/dev/sdb3
D. umount /dev/sdb3
Answer: B
Q9. What is the command to add another IP address (192.168.1.2) to a network interface (eth0) that already has (at least) one IP address in the 192.168.1.0/24 subnet?
A. ip add addr 192.168.1.2/32 dev eth0
B. ifconfig eth0 192.168.1.2 netmask 255.255.255.255
C. ip addr add 192.168.1.2/32 dev eth0
D. ipconfig eth0 192.168.1.2
Answer: C
Q10. The IDE hard drive /dev/hda does not have DMA enabled. Which command must be run to enable DMA on it?
A. hdparm -d /dev/hda
B. hdparm --dma /dev/hda
C. hdparm --dma /dev/hda1
D. hdparm -d /dev/hda1
E. hdparm -d 1 /dev/hda
Answer: E
Q11. Which two LVM commands are missing from the following sequence which is used to create a logical volume and make use of it on a Linux system?
pvcreate, _____, ______, mkfs, mount
A. lvcreate, mdadm
B. lvcreate, vgcreate
C. lvmcreate, vgcreate
D. vgcreate, lvcreate
E. vgcreate, mdadm
Answer: D
Q12. What is the device name for the first SCSI tape drive on a system when used without automatic rewinding after each write operation? (Please specify the full path to the device.)
Answer:
/dev/nst0
Q13. What component of a system does smartd monitor?
A. CPU
B. RAM
C. Hard drives
D. Ethernet traffic
Answer: C
Recommend!! Get the Validated 201-450 dumps in VCE and PDF From Certifytools, Welcome to download: https://www.certifytools.com/201-450-exam.html (New Q&As Version)
