Tips for 300 075 ciptv2

Want to know Examcollection 300 075 ciptv2 Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Free Cisco 300 075 dump answers to Renew 300 075 vce questions at Examcollection. Gat a success with an absolute guarantee to pass Cisco 300 075 dump (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-075-exam-dumps.html

Q41. Which two Cisco Extension Mobility attributes are available in the user device profile? (Choose two.) 

A. regions 

B. description 

C. phone button template 

D. NTP information 

Answer: B,C 


Q42. You are deploying a remote office setup that connects with Cisco Unity Communications Manager at a hub location. You have an available dedicated bandwidth of 20% from the 2-Mb/s WAN circuit for VoIP that supports a maximum of 17 calls. Which codec do you configure in Cisco Unity Communications Manager to achieve this? 

A. G.722 

B. G.711 

C. G.729 

D. iSAC 

E. GSM-FR 

F. iLBC 

Answer:


Q43. Which two configurations can you perform to allow Cisco Unified Communications Manager SIP trunks to send an offer in the INVITE? (Choose two.) 

A. Enable the Media Termination Point Required option on the SIP trunk. 

B. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile. 

C. Select the Display IE Delivery check box in the gateway configuration. 

D. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager servers. 

E. Select the SRTP Allowed check box on the SIP trunk. 

F. Execute the isdn switch-type primary-ni command globally. 

Answer: A,B 


Q44. Which device must be accessible from the public Internet in a Collaboration Edge environment? 

A. Expressway-C 

B. Cisco Unified Communications Manager 

C. Cisco IM and P 

D. Expressway-E 

E. VCS Control 

Answer:


Q45. When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries to log in to Cisco Extension Mobility? 

A. The login will fail because only a single Cisco Extension Mobility profile is allowed. 

B. The user must select the desired profile. 

C. The user must login to both profiles in the order they are presented. 

D. The user may login to both profiles in any order. 

E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is enabled. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco Unified IP Phone and then entering login information in the form of a Cisco Unified Communications Manager UserID and a Personal Identification Number (PIN). If a user has more than one user device profile, a prompt displays on the phone and asks the user to choose a device profile for use with Cisco Extension Mobility. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsem.html 


Q46. Refer to the exhibit. 

If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.) 

A. The physical locations are not different, so the configuration of the phone is not modified. 

B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied. 

C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters. 

D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm. 

E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone. 

Answer: B,C 


Q47. How can the location setting be modified to resolve poor call quality? 

A. No adjustment to location setting is needed 

B. Mark the bandwidth between the locations as unlimited 

C. Decrease the audio bandwidth setting 

D. Remove the audio bandwidth setting 

Answer:


Q48. Which two configurations provide the best SIP trunk redundancy with Cisco Unified Communications Manager? (Choose two.) 

A. Configure all SIP trunks with DNS SRV 

B. Configure all SIP trunks with Cisco Unified Border Element 

C. Configure all SIP trunks to point to a SIP gateway 

D. Configure SIP trunks to be members of route groups and route lists 

E. Configure all SIP trunks to allow TCP ports 5060 

F. Configure all SIP trunks to point to a gatekeeper through SIP to H.323 gateway 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C, E, F For SIP trunks, Cisco Unified Communications Manager supports up to 16 IP addresses for each DNS SRV and up to 10 IP addresses for each DNS host name. The order of the IP addresses depends on the DNS response and may be identical in each DNS query. The OPTIONS request may go to a different set of remote destinations each time if a DNS SRV record (configured on the SIP trunk) resolves to more than 16 IP addresses, or if a host name (configured on the SIP trunk) resolves to more than 10 IP addresses. Thus, the status of a SIP trunk may change because of a change in the way a DNS query gets resolved, not because of any change in the status of any of the remote destinations. 

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08sip.html 


Q49. Which command displays the detailed configuration of all the Cisco Unified IP phones, voice ports, and dial peers of the Cisco Unified SRST router? 

A. show call-manager-fallback all 

B. show dial-peer voice summary 

C. show ephone summary 

D. show voice port summary 

Answer:


Q50. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What should the Called Party Transformation Pattern at the U.S. gateway be configured as? 

A. \+.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: + 

B. \+1.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

C. \+408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: 1 

D. \+1408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

E. \+1.408! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

Answer: