Our pass rate is high to 98.9% and the similarity percentage between our 300-625 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300-625 exam in just one try? I am currently studying for the Cisco 300-625 exam. Latest Cisco 300-625 Test exam practice questions and answers, Try Cisco 300-625 Brain Dumps First.
Check 300-625 free dumps before getting the full version:
NEW QUESTION 1
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. The fabric is locked by admin on switch-2.
- B. Hard zoning is enabled.
- C. Merge control is disabled.
- D. The switch has a conflicting domain ID.
- E. The fabric is locked by admin on another switch.
Answer: A
NEW QUESTION 2
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
- A. auto topology
- B. transit VSANs
- C. IVR NAT
- D. virtual domains
Answer: C
NEW QUESTION 3
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?
- A. ROMMON
- B. BIOS
- C. NX-OS
- D. BASH
Answer: C
NEW QUESTION 4
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?
- A. show fcdomain
- B. show fc2 plogi
- C. show vsan database
- D. show flogi database
Answer: A
NEW QUESTION 5
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# interface fc 1/1MDS(config-if)# fcsp esp manual
- B. MDS(config)# fcsp esp manual
- C. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp mode gcm MDS(config-if-fcsp)# fcsp esp manual
- D. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual MDS(config-if-fcsp)# mode gcm
Answer: A
NEW QUESTION 6
Refer to the exhibit.
Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?
- A. device-alias mode
- B. session
- C. qos
- D. smart-zoning
Answer: A
NEW QUESTION 7
Which port mode is used on an NPV device to connect to an NPIV core switch?
- A. E
- B. F
- C. N
- D. NP
Answer: D
NEW QUESTION 8
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0×8913
- B. 0×8914
- C. 0×xfc0e
- D. 0×8906
Answer: B
NEW QUESTION 9
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?
- A. Both commands execute successfully.
- B. The device alias is renamed and the add command is moved to the rejected list.
- C. Both commands are moved to the rejected list.
- D. The rename command is moved to the rejected list and the add command executes successfully.
Answer: A
NEW QUESTION 10
A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)
- A. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
- B. The QoS policy must be identical to other Cisco FCoE switches in the network.
- C. On the Cisco MDS, the MTU is set equal to 2112.
- D. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
- E. FCoE is already enabled on a Cisco MDS switch.
Answer: BE
NEW QUESTION 11
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The zone database must be distributed over the fabric.
- B. The same alias must be used in zoning as well as DPVM.
- C. All aliases being used are being configured in the same VSAN.
- D. Aliases must be saved within a central database on the fabric.
Answer: A
NEW QUESTION 12
Refer to the exhibit.
What is the result of merging the fabric?
- A. The merged fabric IVR VSAN topology is set to activate.
- B. The merged fabric has NAT enabled.
- C. The merge is invalid.
- D. The merged fabric contains only service group Group1.
Answer: D
NEW QUESTION 13
DRAG DROP
Drag and drop the mechanisms of Cisco Secure Boot from the left into the correct order on the right.
Select and Place:
- A. Mastered
- B. Not Mastered
Answer: A
NEW QUESTION 14
Which action must be performed to deactivate a VSAN without losing its configuration?
- A. Isolate it.
- B. Delete it.
- C. Rename it.
- D. Suspend it.
Answer: D
NEW QUESTION 15
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?
- A. FCIP
- B. zoning merge over LAN
- C. VSAN scoping
- D. IVR
Answer: A
NEW QUESTION 16
A storage engineer is troubleshooting a Cisco MDS switch upgrade issue. What prevents the completion of a non- disruptive upgrade?
- A. The Fibre Channel host initiator is connected.
- B. The Fibre Channel storage target is connected.
- C. The Cisco Fabric Services operation in progress.
- D. The Fibre Channel and FCoE storage targets are connected.
Answer: B
NEW QUESTION 17
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
- A. RPC transport
- B. GPB transport
- C. gRPC transport
- D. gRPC encoding
- E. GPB encoding
Answer: CE
NEW QUESTION 18
Refer to the exhibit.
A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?
- A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.2. shut/no shut interface fc1/11 on MDS-A.
- B. 1. Deactivate zone set Zoneset10-A on MDS-A.2. shut/no shut interface fc1/11 on MDS-A.
- C. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range.
- D. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.2. Activate the zone set Zoneset10-A.
Answer: A
NEW QUESTION 19
Refer to the exhibit.
Which command is used to determine which switch has the lock?
- A. show zoneset active
- B. show zone status
- C. show flogi database
Answer: C
NEW QUESTION 20
Refer to the exhibit.
A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 5.
- B. permit vsan 1-1000 must be configured as rule 1.
- C. permit vsan 1-1000 must be configured under the VSAN policy deny.
- D. permit vsan 1-1000 must be configured under the VSAN policy allow.
Answer: C
NEW QUESTION 21
......
P.S. Dumps-hub.com now are offering 100% pass ensure 300-625 dumps! All 300-625 exam questions have been updated with correct answers: https://www.dumps-hub.com/300-625-dumps.html (0 New Questions)
