All About Free 350-501 Dumps

Actualtests offers free demo for 350-501 exam. "Implementing and Operating Cisco Service Provider Network Core Technologies", also known as 350-501 exam, is a Cisco Certification. This set of posts, Passing the Cisco 350-501 exam, will help you answer those questions. The 350-501 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 350-501 exams and revised by experts!

Free 350-501 Demo Online For Cisco Certifitcation:

NEW QUESTION 1
An engineer working for telecommunication company needs to secure the LAN network using a prefix list.
Which best practice should the engineer follow when he implements a prefix list?

  • A. An engineer must identify the prefix list with a number only.
  • B. The final entry in a prefix list must be /32.
  • C. An engineer must include only the prefixes for which he needs to log activity.
  • D. An engineer must use nonsequential sequence numbers in the prefix list so that he can insert additional entries later.

Answer: D

NEW QUESTION 2
Which two tasks must you perform when you implement LDP NSF on your network? (Choose two.)

  • A. Enable NSF for BGP.
  • B. Implement direct connections for LDP peers.
  • C. Enable NSF for EIGRP.
  • D. Disable Cisco Express Forwarding.
  • E. Enable NSF for the link-state routing protocol that is in use on the network.

Answer: BE

NEW QUESTION 3
350-501 dumps exhibit
Refer to the exhibit. Based on the show command output, which result is true after BGP session is established?

  • A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2.
  • B. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2.
  • C. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it.
  • D. The IOS XR router does not advertises any routes to the neighbor 192.168.2.2, but it accepts any routes from 192.168.2.2.

Answer: C

NEW QUESTION 4
350-501 dumps exhibit
Refer to the exhibit. Which purpose of implementing NSF with this configuration is true?

  • A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up.
  • B. The router uses NSF to reduce neighbor-relationship downtime during RP switchover.
  • C. The router uses NSF to load balance traffic on a routed EtherChannel.
  • D. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds.

Answer: A

NEW QUESTION 5
In an MPLS network, which protocol can be used to distribute a Segment Prefix?

  • A. LDP
  • B. EIGRP
  • C. OSPF
  • D. RSVP-TE

Answer: C

NEW QUESTION 6
DRAG DROP
Drag and drop each NAT64 description from the left onto the correct NAT64 type on the right.
Select and Place:
350-501 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
350-501 dumps exhibit

NEW QUESTION 7
350-501 dumps exhibit
Refer to the exhibit Which effect of this configuration is true?

  • A. The two routers fail to form a neighbor relationship because they have different IS-IS area types.
  • B. The two routers successfully form a neighbor relationship.
  • C. The two routers fail to form a neighbor relationship because the authentication configuration is missing.
  • D. The two routers fail to form a neighbor relationship because their system IDs are different.

Answer: B

NEW QUESTION 8
350-501 dumps exhibit
Refer to the exhibit. A network engineer is configuring customer edge routers to finalize a L2VPN over MPLS deployment. Assume that the AToM L2VPN service that connects the two CEs is configured correctly on the service provider network.
Which action causes the solution to fail?

  • A. OSPF does not work with L2VPN services.
  • B. The routing protocol network types are not compatible.
  • C. A loopback with a /32 IP address has not been used.
  • D. The xconnect statement has not been defined.

Answer: B

NEW QUESTION 9
Which additional feature does MPLS DiffServ tunneling support?

  • A. matching EXP and DSCP values
  • B. PHB layer management
  • C. using GRE tunnels to hide markings
  • D. interaction between MPLS and IGP

Answer: B

NEW QUESTION 10
Refer to the exhibit. Which statement about the neighbor statements for 192.168.1.1 is true?

  • A. The router sends BGP labels for its prefixes to this peer.
  • B. The router must have TDP configured for the send-label command to operate.
  • C. The neighbor router receives at least four labels from this router.
  • D. The router sends only a label for the prefix for Loopback0.

Answer: A

NEW QUESTION 11
Which two IS-IS parameters must match before two Level 2 peers can form an adjacency? (Choose two.)

  • A. hello timer setting
  • B. authentication settings
  • C. area ID
  • D. system ID
  • E. MTU

Answer: BE

NEW QUESTION 12
350-501 dumps exhibit
Refer to the exhibit. This configuration is being applied on an IOS XR route. Which statement about this configuration is true?

  • A. It is used to create a sensor-group and has a list of YANG models for streaming.
  • B. It is used to create a subscription to specify the streaming interval.
  • C. It is used to identify MIB entries and has a list of YANG models.
  • D. It is used to identify traps for SNMP polling.

Answer: A

NEW QUESTION 13
350-501 dumps exhibit
Refer to the exhibit. BGPsec is implemented on R1, R2, R3, and R4. BGP peering is established between neighboring autonomous systems. Which statement about implementation is true?

  • A. BGP updates from the iBGP peers are appended with a community of local-as.
  • B. BGP updates from the all BGP peers are appended with a community of no-export.
  • C. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator.
  • D. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature.

Answer: D

NEW QUESTION 14
After you analyze your network environment, you decide to implement a full separation model for Internet access and MPLS L3VPN services. For which reason do you make this decision?

  • A. It enables EGP and IGP to operate independently.
  • B. It enables you to choose whether to separate or centralize each individual service.
  • C. It is easier to manage a system in which services are mixed.
  • D. It requires only one edge router.

Answer: A

NEW QUESTION 15
350-501 dumps exhibit
Refer to the exhibit. Which configuration prevents the OSPF neighbor from establishing?

  • A. default-metric
  • B. duplex
  • C. network statement
  • D. mtu

Answer: D

NEW QUESTION 16
A regional MPLS VPN provider operates in two regions and wants to provide MPLS L3VPN service for a customer with two sites in these separate locations. The VPN provider approaches another organization to provide backbone carrier services so that the provider can connect to these two locations.
Which statement about this scenario is true?

  • A. When edge routers at different regional sites are connected over the global carrier backbone, MP-eBGP must run between the routers to exchange the customer VPNv4 routes.
  • B. When eBGP is used for label exchange using the send-label option, MPLS-BGP forwarding is configured under the global ABC CSC PE-to-CE interface.
  • C. When BGP is used for both route and label exchange, the neighbor a.b.c.d send-label command is used under the address-family VPNv4 command mode.
  • D. When IGP is used for route exchange and LDP for label exchange, MPLS is enabled only on the VRF interface on the backbone-carrier PE side.

Answer: B

NEW QUESTION 17
Egress PE NAT is being used via a single centralized router to provide Internet access to L3VPN customers.
Which description of the NAT operation is true?

  • A. The NAT table contains a field to identify the inside VRF of a translation.
  • B. Multiple address pools are needed for the same L3VPN because each site has a separate NAT.
  • C. The different L3VPNs using the Internet access must not have IP overlaps internally.
  • D. Users in different VRFs cannot share the same outside global IP address.

Answer: A

NEW QUESTION 18
Which statement about Network Services Orchestrator (NSO) is true?

  • A. It must use SDN as an overlay for addressing.
  • B. It uses YANG modeling language to automate devices.
  • C. It is used only in service provider environments.
  • D. It can be used only with XML coding.

Answer: B

NEW QUESTION 19
350-501 dumps exhibit
Refer to the exhibit. A network engineer is implementing QoS services. Which two statements about the qos-group keyword on Cisco IOS XR are true? (Choose two.)

  • A. It marks packets for end-to-end QoS policy enforcement across the network.
  • B. QoS group marking occurs on the ingress.
  • C. The QoS group numbering corresponds to priority level.
  • D. QoS group can be used in fabric QoS policy as match criteria.
  • E. It cannot be used with priority traffic class.

Answer: BD

NEW QUESTION 20
What is the difference between SNMP and model- driven telemetry?

  • A. SNMP uses the YANG data modeling language.
  • B. Telemetry uses traps and inform messages to deliver data to a network administrator on a polling basis.
  • C. Telemetry allows for modeled network data to be pushed to the network administrator on an as-needed basis.
  • D. SNMP pushes network data to the network administrator whenever it is queried.

Answer: C

NEW QUESTION 21
350-501 dumps exhibit
Refer to the exhibit. An engineer wants to authenticate the OSPF neighbor between PE-A and PE-B using MD5. Which command on PE-B successfully completes the configuration?

  • A. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611 PE-B(config- if)#ip ospf authentication null
  • B. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611 PE-B(config-if)#ip ospf authentication key-chain 44578611
  • C. PE-B(config-if)#ip ospf message-digest-key 1 md5 44568611 PE-B(config- if)#ip ospf authentication null
  • D. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611 PE-B(config- if)#ip ospf authentication message-digest

Answer: D

NEW QUESTION 22
350-501 dumps exhibit
Refer to the exhibit. Which statement about this configuration is true?

  • A. It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run.
  • B. It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels.
  • C. It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing.
  • D. It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run.

Answer: C

NEW QUESTION 23
Which configuration modifies Local Packet Transport Services hardware policies?

  • A. 350-501 dumps exhibit
  • B. 350-501 dumps exhibit
  • C. 350-501 dumps exhibit
  • D. 350-501 dumps exhibit

Answer: C

NEW QUESTION 24
......

Recommend!! Get the Full 350-501 dumps in VCE and PDF From Certleader, Welcome to Download: https://www.certleader.com/350-501-dumps.html (New 102 Q&As Version)