It is more faster and easier to pass the Cisco ccie 400 101 dumps exam by using Printable Cisco CCIE Routing and Switching (v5.0) questuins and answers. Immediate access to the Avant-garde 400 101 pdf Exam and find the same core area ccie 400 101 dumps questions with professionally verified answers, then PASS your exam with a high score now.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-101-exam-dumps.html
Q11. Refer to the exhibit.
Which feature can R1 use to fail over from R2 to R3 if the address for R2 becomes unavailable?
A. object tracking
B. HSRP
C. GLBP
D. LACP
Answer: A
Explanation:
The object tracking feature allows you to create a tracked object that multiple clients can use to modify the client behavior when a tracked object changes. Several clients register their interest with the tracking process, track the same object, and take different actions when the object state changes.
Clients include the following features:
. Embedded Event Manager (EEM)
. Gateway Load Balancing Protocol (GLBP)
. Hot Standby Redundancy Protocol (HSRP)
. Virtual port channel (vPC)
. Virtual Router Redundancy Protocol (VRRP)
The object tracking monitors the status of the tracked objects and communicates any changes made to interested clients. Each tracked object is identified by a unique number that clients can use to configure the action to take when a tracked object changes state.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_cli_nxos/l3_object.html
Q12. When you migrate a network from PVST+ to rapid-PVST+, which two features become inactive? (Choose two.)
A. Root guard
B. Loop guard
C. UplinkFast
D. UDLD
E. BackboneFast
F. Bridge Assurance
Answer: C,E
Explanation:
It is good to know the UplinkFast and BackboneFast behavior before you start the migration process.
Here, the Access1 switch runs Cisco IOS. This output is taken before migration to the rapid-PVST+ mode:
Access1#show spanning-tree vlan 10
VLAN0010
Spanning tree enabled protocol ieee
Root ID Priority 24586
Address 0015.63f6.b700
Cost 3019
Port 107 (FastEthernet3/0/1)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 49162 (priority 49152 sys-id-ext 10)
Address 000f.f794.3d00
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
Uplinkfast enabled
Interface Role Sts Cost Prio.Nbr Type
Fa3/0/1 Root FWD 3019 128.107 P2p
Fa3/0/2 Altn BLK 3019 128.108 P2p
Access1#show spanning-tree summary
Switch is in pvst mode
Root bridge for: none
Extended system ID is enabled
Portfast Default is disabled
PortFast BPDU Guard Default is enabled
Portfast BPDU Filter Default is disabled
Loopguard Default is disabled
EtherChannel misconfig guard is enabled
UplinkFast is enabled
BackboneFast is enabled
Configured Pathcost method used is short
Name Blocking Listening Learning Forwarding STP Active
VLAN0010 1 0 0 1 2
VLAN0020 1 0 0 1 2
2 vlans 2 0 0 2 4
This output is taken after the mode is changed to rapid-PVST+:
Access1#show spanning-tree vlan 10
VLAN0010
Spanning tree enabled protocol rstp
Root ID Priority 24586
Address 0015.63f6.b700
Cost 3019
Port 107 (FastEthernet3/0/1)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 49162 (priority 49152 sys-id-ext 10)
Address 000f.f794.3d00
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
UplinkFast enabled but inactive in rapid-pvst mode
Interface Role Sts Cost Prio.Nbr Type
Fa3/0/1 Root FWD 3019 128.107 P2p
Fa3/0/2 Altn BLK 3019 128.108 P2p
Access1#show spanning-tree summary
Switch is in rapid-pvst mode
Root bridge for: none
Extended system ID is enabled
Portfast Default is disabled
PortFast BPDU Guard Default is enabled
Portfast BPDU Filter Default is disabled
Loopguard Default is disabled
EtherChannel misconfig guard is enabled
UplinkFast is enabled but inactive in rapid-pvst mode
BackboneFast is enabled but inactive in rapid-pvst mode
Configured Pathcost method used is short
Name Blocking Listening Learning Forwarding STP Active
VLAN0010 1 0 0 1 2
VLAN0020 1 0 0 1 2
2 vlans 2 0 0 2 4
You can see in the show spanning-tree summary command output that UplinkFast and BackboneFast are enabled, but are inactive in rapid-PVST mode.
Reference: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/72836-rapidpvst-mig-config.html#upback1
Q13. Which two BGP attributes are optional, non-transitive attributes? (Choose two.)
A. AS path
B. local preference
C. MED
D. weight
E. cluster list
Answer: C,E
Q14. Which two mechanisms provide Cisco IOS XE Software with control plane and data plane separation? (Choose two.)
A. Forwarding and Feature Manager
B. Forwarding Engine Driver
C. Forwarding Performance Management
D. Forwarding Information Base
Answer: A,B
Explanation:
Control Plane and Data Plane Separation
IOS XE introduces an opportunity to enable teams to now build drivers for new Data Plane ASICs outside the IOS instance and have them program to a set of standard APIs which in turn enforces Control Plane and Data Plane processing separation. IOS XE accomplishes Control Plane / Data Plane separation through the introduction of the Forwarding and Feature Manager (FFM) and its standard interface to the Forwarding Engine Driver (FED). FFM provides a set of APIs to Control Plane processes. In turn, the FFM programs the Data Plane via the FED and maintains forwarding state for the system. The FED is the instantiation of the hardware driver for the Data Plane and is provided by the platform.
Reference: http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-xe-3sg/QA_C67-622903.html
Q15. Which two options are benefits of EIGRP OTP? (Choose two.)
A. It allows EIGRP routers to peer across a service provider without the service provider involvement.
B. It allows the customer EIGRP domain to remain contiguous.
C. It requires only minimal support from the service provider.
D. It allows EIGRP neighbors to be discovered dynamically.
E. It fully supports multicast traffic.
F. It allows the administrator to use different autonomous system numbers per EIGRP domain.
Answer: A,B
Explanation:
EIGRP Over the Top (OTP) allows EIGRP routers to peer across a service provider infrastructure without the SP’s involvement. In fact with OTP, the provider won’t see customer routes at all. EIGRP OTP acts as a provider-independent overlay that transports customer data between the customer’s routers. To the customer, the EIGRP domain is contiguous. A customer’s EIGRP router sits at the edge of the provider cloud, and peers with another EIGRP router a different location across the cloud. Learned routes feature a next hop of the customer router — not the provider. Good news for service providers is that customers can deploy EIGRP OTP with their involvement
Reference: http://ethancbanks.com/2013/08/01/an-overview-of-eigrp-over-the-top-otp/
Q16. Which component of the BGP ORF can you use to permit and deny routing updates?
A. match
B. action
C. AFI
D. SAFI
E. ORF type
Answer: A
Q17. Refer to the exhibit.
Which two issues can cause the interface VLAN10 to be down/down? (Choose two.)
A. The VLAN is inactive or has been removed from the VLAN database.
B. STP is in a forwarding state on the port.
C. A Layer 2 access port is configured with VLAN10, but is in a down/down state.
D. The autostate exclude feature was used on interface VLAN10.
Answer: A,C
Q18. A configuration includes the line ip nbar port-map SSH tcp 22 23 443 8080. Which option describes the effect of this configuration line?
A. It configures NBAR to search for SSH using ports 22, 23, 443, and 8080.
B. It configures NBAR to allow SSH connections only on ports 22, 23, 443, and 8080.
C. It enables NBAR to inspect for SSH connections.
D. It creates a custom NBAR port-map named SSH and associates TCP ports 22, 23, 443, and 8080 to itself.
Answer: A
Explanation:
The ip nbar-port-map command configures NBAR to search for a protocol or protocol name using a port number other than the well-known port.
Reference: http://www.cisco.com/c/en/us/td/docs/ios/12_2/qos/command/reference/fqos_r/qrfcmd10.pd f
Q19. Which switching technology can be used to solve reliability problems in a switched network?
A. fragment-free mode
B. cut-through mode
C. check mode
D. store-and-forward mode
Answer: D
Explanation:
Characteristics of Store-and-Forward Ethernet Switching
This section provides an overview of the functions and features of store-and-forward Ethernet switches.
Error Checking
Figure 1 shows a store-and-forward switch receiving an Ethernet frame in its entirety. At the end of that frame, the switch will compare the last field of the datagram against its own frame-check-sequence (FCS) calculations, to help ensure that the packet is free of physical and data-link errors. The switch then performs the forwarding process. Whereas a store-and-forward switch solves reliability issues by dropping invalid packets, cut-through devices forward them because they do not get a chance to evaluate the FCS before transmitting the packet.
Figure 1. Ethernet Frame Entering a Store-and-Forward Bridge or Switch (from Left to Right)
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-5020-switch/white_paper_c11-465436.html
Q20. Assume that the following MAC addresses are used for the bridge ID MAC address by four different switches in a network. Which switch will be elected as the spanning-tree root bridge?
A. SwitchA uses MAC 1000.AA-AA-AA-AA-AA-AA.
B. SwitchB uses MAC 2000.BB-BB-BB-BB-BB-BB.
C. SwitchC uses MAC 3000.CC-CC-CC-CC-CC-CC.
D. SwitchD uses MAC 4000.DD-DD-DD-DD-DD-DD.
Answer: A
Explanation:
The switch with the highest switch priority (the lowest numerical priority value) is elected as the root switch. If all switches are configured with the default priority (32768), the switch with the lowest MAC address in the VLAN becomes the root switch.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swstp.html
