Master the ccie 400 101 dumps CCIE Routing and Switching (v5.0) content and be ready for exam day success quickly with this Exambible passleader 400 101 download. We guarantee it!We make it a reality and give you real 400 101 ccie questions in our Cisco 400 101 pdf braindumps.Latest 100% VALID Cisco 400 101 ccie Exam Questions Dumps at below page. You can use our Cisco 400 101 vce braindumps and pass your exam.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-101-exam-dumps.html
Q51. DRAG DROP
Drag and drop the BGP attribute on the left to the correct category on the right.
Answer:
Q52. Refer to the exhibit.
R1 is configured as shown. R1 is able to establish a neighbor adjacency only with R2. Which addition must you make to the R1 configuration to allow it to establish an adjacency with R3?
A. interface gigabitethernet 0/1
ip address 10.1.0.1 255.255.255.0
ip ospf network point-to-point
B. interface gigabitethernet 0/1
ip address 10.1.0.1 255.255.255.0
ip ospf 1 area 0
C. router ospf 1
network 10.1.0.0 0.0.0.255 area 1
D. router ospf 1
area 0 stub
Answer: C
Explanation:
To enable interfaces and networks with OSPF, the networks need to be specified in the network statement. In the configuration shown, only 10.0.0.0/24 has been enabled, we are missing the network connecting to R3 (10.1.0.0/24).
Q53. Which Cisco IOS XE process administers routing and forwarding?
A. Forwarding manager
B. Interface manager
C. Cisco IOS
D. Host manager
Answer: C
Explanation:
Some of the processes are listed in the table below:
Process
Purpose
Affected FRUs
SubPackage Mapping
Host Manager
Provides an interface between the IOS process and many of the information-gathering functions of the underlying platform kernel and operating system.
RP (one instance per RP)
SIP (one instance per SIP)
ESP (one instance per ESP)
RPControl
SIPBase
ESPBase
Interface Manager
Provides an interface between the IOS process and the per-SPA interface processes on the SIP.
RP (one instance per RP)
SIP (one instance per SIP)
RPControl
SIPBase
IOS
The IOS process implements all forwarding and routing features for the router.
RP (one per software redundancy instance per RP). Maximum of two instances per RP.
RPIOS
Forwarding Manager
Manages the downloading of configuration to each of the ESPs and the communication of forwarding plane information, such as statistics, to the IOS process.
RP (one per software redundancy instance per RP). Maximum of two instances per RP.
ESP (one per ESP)
RPControl
ESPBase
Reference: http://www.cisco.com/c/en/us/td/docs/routers/asr1000/configuration/guide/chassis/asrswcfg /Software_Packaging_Architecture.html
Q54. Which two services are used to transport Layer 2 frames across a packet-switched network? (Choose two.)
A. Frame Relay
B. ATM
C. AToM
D. L2TPv3
Answer: C,D
Explanation:
Both AToM and L2TPv3 have the common objective of transmitting packet switched traffic of L2 frames (Frame Relay, ATM, and Ethernet) across a packet-switched network.
Reference: Layer 2 VPN Architectures - Google Books Result Wei Luo, Carlos Pignataro, Anthony Chan
https://books.google.com/books?isbn=0132796864
Q55. Which two statements about MAC ACLs are true? (Choose two.)
A. They support only inbound filtering.
B. They support both inbound and outbound filtering.
C. They are configured with the command mac access-list standard.
D. They can filter non-IP traffic on a VLAN and on a physical interface.
Answer: A,D
Explanation:
MAC ACL, also known as Ethernet ACL, can filter non-IP traffic on a VLAN and on a physical Layer 2 interface by using MAC addresses in a named MAC extended ACL. The steps to configure a MAC ACL are similar to those of extended named ACLs. MAC ACL supports only inbound traffic filtering.
Reference: http://www.ciscopress.com/articles/article.asp?p=1181682&seqNum=4
Q56. Refer to the exhibit.
Which two issues can cause the interface VLAN10 to be down/down? (Choose two.)
A. The VLAN is inactive or has been removed from the VLAN database.
B. STP is in a forwarding state on the port.
C. A Layer 2 access port is configured with VLAN10, but is in a down/down state.
D. The autostate exclude feature was used on interface VLAN10.
Answer: A,C
Q57. Refer to the exhibit.
The two standalone chassis are unable to convert into a VSS. What can you do to correct the problem?
A. Set a different port channel number on each chassis.
B. Set a different virtual domain ID on each chassis.
C. Set the redundancy mode to rpr on both chassis.
D. Add two ports to the port channel group.
Answer: A
Q58. Which statement about the spanning-tree portfast feature on the switch is true?
A. If an interface is enabled for portfast receives BDPU, the port goes through the spanning-tree listening, learning, and forwarding states.
B. If an interface is enabled for portfast receives BDPU, the port does not go through the spanning-tree listening, learning, and forwarding states.
C. If an interface is enabled for portfast receives BDPU, the port is shut down immediately.
D. If an interface is enabled for portfast receives BDPU, the port goes into the spanning-tree inconsistent state.
Answer: A
Q59. Refer to the exhibit.
Which two benefits result from using this command on a switch? (Choose two.)
A. The port cannot forward unknown unicast packets.
B. Network security is increased on the configured port.
C. The port cannot forward unknown multicast packets.
D. The port cannot forward unknown broadcast packets.
E. Network security is increased on all ports of the switch.
F. Unknown packets of all types, except unicast, are blocked.
Answer: A,B
Q60. Which two options are requirements to implement 6VPE? (Choose two.)
A. MPLS between PEs
B. 6-in-4 tunnels between PEs
C. MP-BGP VPNv6 exchange
D. MP-BGP IPv6+label exchange
E. Any Transport over MPLS
F. IPv4/IPv6 dual-stack in core
Answer: A,C
