High value of 70-342 book materials and preparation exams for Microsoft certification for examinee, Real Success Guaranteed with Updated 70-342 pdf dumps vce Materials. 100% PASS Advanced Solutions of Microsoft Exchange Server 2013 exam Today!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-342 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-342 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-342-exam-dumps.html
Q61. HOTSPOT - (Topic 6)
You have an organization that has Exchange Server 2010 and Exchange Server 2013
deployed.
Half of the mailboxes are on Exchange Server 2010 servers and the other half are on
Exchange Server 2013 servers.
You plan to implement Kerberos authentication for all mailbox access.
You need to identify which Service Principal Names (SPNs) to associate with each version of Exchange Server.
In the table below identify which SPNs to associate with each Exchange Server version.
NOTE: Make only one selection in each row.
Answer:
Q62. (Topic 6)
Your company has offices in Tokyo, Bangkok, and Shanghai.
All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link.
The network contains 10 servers that have Exchange Server 2010 installed. The servers are configured as shown in the following table.
You plan to deploy 10 servers that will have Exchange Server 2013 installed. The servers will be configured as shown in the following table.
Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers.
You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails.
Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.)
A. Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.
B. Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.
C. Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.
D. Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.
E. Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers.
Answer: B,C,E
Explanation:
Note:
* Exchange 2013 Unified Messaging offers administrators: / A complete voice mail system Unified Messaging offers a complete voice mail solution using a single store, transport, and directory infrastructure. The store is provided by a Mailbox server and forwarding of incoming calls from a VoIP gateway or IP PBX is handled by a Client Access server. All email and voice mail messages can be managed from a single management point, using a single administration interface and tool set. / An Exchange security model The Microsoft Exchange Unified Messaging service on a Mailbox server and the Microsoft Exchange Unified Messaging Call Router service on a Client Access server run as a single Exchange server account. Consolidation
* The client access server (CAS) is a server role that handles all client connections to Exchange Server 2010 and Exchange 2013. The CAS supports all client connections to Exchange Server from Microsoft Outlook and Outlook Web App, as well as ActiveSync applications. The CAS also provides access to free/busy data in Exchange calendars.
The CAS is one of five server roles in Exchange Server 2007 and Exchange 2010, and one of two server roles in Exchange Server 2013. It must be installed in every Exchange Server organization and on every Active Directory (AD) site that has the Exchange mailbox server role installed.
Q63. (Topic 6)
You have an Exchange Server 2013 organization named adatum.com.
You have a database availability group (DAG) that contains four Exchange servers named Server1, Server2, Server3, and Server4. The file share witness is on a server named Share1.
The organization has two Send connectors. The Send connectors are configured as shown in the following table.
Users report that email sent to external recipients is not being received.
You discover that outbound email messages are queued on Server3 and Server4.
You need to ensure that all of the email messages queued on Server3 and Server4 are delivered to the Internet as quickly as possible.
What should you do?
A. Modify the cost of External2.
B. Disable External1.
C. Modify the list of source bridgehead servers of External2.
D. Modify the cost of External1.
Answer: B
Explanation:
Note:
* In Microsoft Exchange Server 2013, a Send connector controls the flow of outbound messages to the receiving server.
* When a message is to be delivered to a remote delivery group, a routing path must be determined for the message. Exchange 2013 uses the same logic as Exchange 2010 to select the routing path for a message:
Calculate the least-cost routing path by adding the cost of the IP site links that must be traversed to reach the destination. If the destination is a connector, the cost assigned to the address space is added to the cost to reach the selected connector. If multiple routing paths are possible, the routing path with the lowest aggregate cost is used; If more than one routing path has the same cost, the routing path with the least number of hops is used; If more than one routing path is still available, the name assigned to the AD sites before the destination is considered. The routing path where the AD site nearest the destination is lowest in alphanumeric order is used. If the site nearest the destination is the same for all routing paths being evaluated, an earlier site name is considered.
Q64. (Topic 5)
You need to resolve the content filtering issue for the Office 365 pilot users.
What should you do?
A. Run the Set-Mailbox cmdlet and specify the -MaxBlockedSenders and the -MicrosoftOnlineServicesID parameters.
B. Run the Microsoft Online Services Directory Synchronization Configuration Wizard and select Enable Exchange hybrid deployment.
C. Modify the default content filter policy from the Office 365 portal.
D. Run the Set-Mailbox cmdlet and specify the -MaxSafeSenders and the -MicrosoftOnlineServicesID parameters.
Answer: B
Explanation:
* Scenario:
/ The pilot users report that entries added to their Safe Senders list and their Blocked
Senders list fail to work.
/ For the pilot mailboxes, all inbound email messages from the Internet are delivered to the
Exchange Server organization, and then forwarded to Office 365.
* Hybrid Configuration wizard Exchange 2013 includes the Hybrid Configuration wizard which provides you with a streamlined process to configure a hybrid deployment between on-premises Exchange and Exchange Online organizations.
Reference: Exchange Server 2013 Hybrid Deployments
Q65. DRAG DROP - (Topic 6)
You have an Exchange Server 2010 organization that contains two servers named EX1 and EX2. EX1 and EX2 are members of a database availability group (DAG) named DAG1.
You plan to migrate the organization to Exchange Server 2013.
You install Exchange Server 2013 on two new servers named EX3 and EX4 and you import the required certificates.
You need to recommend which migration tasks must be performed to migrate the mailboxes and the public folders. The solution must meet the following requirements:
. Prevent any interruption to mailbox and public folder access during the migration.
. Ensure that all mailbox and public folder data remains highly available during the
migration.
Which five actions should you perform in sequence before decommissioning EX1 and EX2 from the network? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q66. HOTSPOT - (Topic 6)
You have an Exchange Server 2013 organization that contains four servers named EX1, EX2, EX3, and EX4. All of the servers run Windows Server 2012 R2 and are members of a database availability group (DAG) named DAG1. All of the mailbox databases replicate to all of the Mailbox servers.
From EX1, you run the Get-ClusterNode | fl cluster, state,*name*,*weight* command and you receive the following output.
Use the drop-down menus to select the answer choice that completes each statement.
Answer:
Q67. (Topic 6)
You have a hybrid deployment of Exchange Server 2013 and Office 365.
The mail flow between Office 365 and the on-premises Exchange Server environment is
routed through an Exchange Server 2010 Edge Transport server.
Your company is assigned a new set of public IP addresses.
A network administrator updates the external firewall address and all of the associated
DNS records.
Office 365 users report that they cannot receive email messages from on-premises users.
You discover that outgoing email messages to Office 365 are in the Office 365 SMTP
queue on an Edge server.
You need to ensure that the on-premises users can send email messages successfully to
the Office 365 users.
Which tool should you use?
A. The Exchange Management Console
B. The Exchange Control Panel in Office 365
C. The Exchange Admin Center
D. The Exchange Remote Connectivity Analyzer
Answer: C
Explanation:
Note:
* The section describes the user interface elements that are common across the EAC (Exchange Admin Center).
* Check the mail flow setting.
Reference: Managing Directory Based Edge Blocking (DBEB) feature in Exchange Online Protection (EOP)
Q68. (Topic 3)
You are evaluating the implementation of the organization relationship.
You need to recommend which tasks must be performed to ensure that the Contoso users can view the Out of Office message of the Tailspin Toys users before the Contoso users send a message to the Tailspin Toys users.
What should you recommend doing before implementing the organization relationship?
A. Create a Policy Tip.
B. Upgrade all of the client computers to Outlook 2010.
C. Create a MailTip.
D. Publish the Autodiscover service of Tailspin Toys.
E. Create a remote domain.
Answer: B
Explanation: * Scenario: Implement an organization relationship between Contoso and Tailspin Toys.
Q69. HOTSPOT - (Topic 1)
You need to resolve the IRM template issue.
Which user right should you modify?
To answer, select the appropriate user right in the answer area.
Answer:
Q70. (Topic 6)
You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table.
You deploy Microsoft Lync Server 2010. You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server.
Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.)
A. EX1
B. EX2
C. EX3
D. EX4
E. EX5
Answer: B,D,E
Explanation:
Add all Client Access and Mailbox servers to the SIP URI dial plan. However, if you have multiple SIP URI dial plans, you must add all Client Access and Mailbox servers to all SIP URl dial plans.
Reference: Deploying Exchange 2013 UM and Lync Server overview
https://technet.microsoft.com/en-us/library/bb676409(v=exchg.150).aspx
