Your success in Microsoft 70 410 pdf is our sole target and we develop all our 70 410 exam dumps braindumps in a way that facilitates the attainment of this target. Not only is our 70 410 dumps pdf study material the best you can find, it is also the most detailed and the most updated. 70 410 questions Practice Exams for Microsoft Windows Server 70 410 questions are written to the highest standards of technical accuracy.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-410-exam-dumps.html
Q151. HOTSPOT - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
From Server2, you attempt to connect to Server1 by using Computer Management and you receive the following error message: "Computer Server1 cannot be found. The network path was not found."
From Server1, you successfully connect to Server2 by using Server Manager.
You need to ensure that you can manage Server1 remotely from Server2 by using Computer Management.
What should you configure? To answer, select the appropriate option in the answer area.
Answer:
Q152. - (Topic 3)
You install Windows Server 2012 R2 on a standalone server named Server1. You configure Server1 as a VPN server.
You need to ensure that client computers can establish PPTP connections to Server1.
Which two firewall rules should you create? (Each correct answer presents part of the solution. Choose two.)
A. An inbound rule for protocol 47
B. An outbound rule for protocol 47
C. An inbound rule for TCP port 1723
D. An inbound rule for TCP port 1701
E. An outbound rule for TCP port 1723
F. An outbound rule for TCP port 1701
Answer: A,C
Explanation:
The following is a list of firewall ports which need to be opened for the various VPN tunnel
protocols:
For PPTP:
IP Protocol=TCP, TCP Port number=1723 <- Used by PPTP control path
IP Protocol=GRE (value 47) <- Used by PPTP data path
For L2TP:
IP Protocol Type=UDP, UDP Port Number=500 <- Used by IKEv1 (IPSec control path)
IP Protocol Type=UDP, UDP Port Number=4500 <- Used by IKEv1 (IPSec control path)
IP Protocol Type=ESP (value 50) <- Used by IPSec data path
For SSTP:
IP Protocol=TCP, TCP Port number=443 <- Used by SSTP control and data path
For IKEv2:
IP Protocol Type=UDP, UDP Port Number=500 <- Used by IKEv2 (IPSec control path)
IP Protocol Type=UDP, UDP Port Number=4500 <- Used by IKEv2 (IPSec control path)
IP Protocol Type=ESP (value 50) <- Used by IPSec data path
Q153. - (Topic 2)
Your network contains a file server named Server1 that runs Windows Server 2012 R2.All client computers run Windows 8.
You need to ensure that when users are connected to the network, they always use local offline files that are cached from Server1.
Which Group Policy setting should you configure?
A. Configure slow-link mode.
B. Configure Slow link speed
C. Enable file synchronization on costed networks
D. Turn on economical application of Administratively assigned Offline Files.
Answer: A
Explanation:
A. Offline Files to provide faster access to cached files and redirected folders.
B. Defines a slow connection for purposes of Applying and updating Group Policy.
C. automatically tracks roaming and bandwidth usage limits while on metered connections
D. Lists network files and folders that are always available for offline use. This policy makes the specified files and folders available offline to users of the computer. When Offline Files is operating in the slow-link mode, all network file requests are satisfied from the OfflineFiles cache. This is similar to a user working offline. If you enable this policy setting, Offline Files uses the slow-link mode if the network throughput between the client and the server is below (slower than) the Throughput threshold parameter, or if the round-trip network latency is above (slower than) the Latency threshold parameter.
Q154. - (Topic 1)
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch named Virtual1.
On VM5, you install a network monitoring application named Monitor1.
You need to capture all of the inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)
A. Get-VM “VM6 | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM “VM5 I Set-VMNetworkAdapter -IovWeight 0
C. Get-VM “VM5 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “VM6 | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM “VM6 | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM “VM5 | Set-VMNetworkAdapter -AllowTeaming On
Answer: C,E
Explanation:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source, and Destination. . If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network adapter configured to receive the packets. . If set to Destination, it receives copied packets from the source virtual network adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which s the source.
Reference: http://technet.microsoft.com/en-us/library/hh848457.aspx
Q155. - (Topic 3)
You have a server named Server2 that runs Windows Server 2012 R2. Server2 has the Hyper-V server role installed.
The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server2 named VM1.
You need to ensure that you can configure a pass-through disk for VM1.
What should you do?
A. Convert Disk 1 to a basic disk.
B. Take Disk 1 offline.
C. Create a partition on Disk 1.
D. Convert Disk 1 to a MBR disk.
Answer: B
Explanation:
Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective
Q156. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. You install Windows Server 2012 on a new computer named DC3. You need to manually configure DC3 as a domain controller. Which tool should you use?
A. Server Manager
B. winrm.exe
C. Active Directory Domains and Trusts
D. dcpromo.exe
Answer: A
Q157. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a security template named Template1 by using the security template snap-in.
You need to apply Template1 to Server2.
Which tool should you use?
A. Security Templates
B. Computer Management
C. Security Configuration and Analysis
D. System Configuration
Answer: C
Explanation:
A security policy is a combination of security settings that affect the security on a computer. You can use your local security policy to edit account policies and local policies on your local computer.
A. Template was already created – Provide standard security option to use in security policies
B. Needs to be applied at the GP level
C. Security templates are inactive until imported into a Group Policy object or the SecurityConfiguration and Analysis
D. Tool to ID windows problems
Q158. HOTSPOT - (Topic 2)
You have a server named DHCP1 that runs Windows Server 2012 R2. DHCP1 does not
have access to the Internet.
All roles are removed completely from DHCP1.
You mount a Windows Server 2012 R2 installation image to the C:Mount folder.
You need to install the DHCP Server server role on DHCP1 by using Server Manager.
Which folder should you specify as the alternate path for the source files?
To answer, select the appropriate folder in the answer area.
Answer:
Q159. - (Topic 3)
You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing Group Policy preference.
Which of the following is TRUE with regards to Group Policy preference?
A. It supports applications and operating system features that are not compatible with Group Policy
B. It does not support item-level targeting.
C. It is the same as Group Policy filtering.
D. It does not cause the application or operating system feature to disable the user interface for the settings they configure.
Answer: A,D
Q160. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.
You log on to Server1.
You need to retrieve a list of the active TCP connections on Server2.
Which command should you run from Server1?
A. winrm get server2
B. netstat> server2
C. dsquery * -scope base -attrip, server2
D. winrs -r:server2 netstat
Answer: D
Explanation:
This command line tool enables administrators to remotely execute most Cmd.exe commands using the WSManagement protocol.
