Passleader offers free demo for 70 410 vce exam. "Installing and Configuring Windows Server 2012", also known as 70 410 exam questions exam, is a Microsoft Certification. This set of posts, Passing the Microsoft exam collections 70 410 exam, will help you answer those questions. The mcsa 70 410 pdf Questions & Answers covers all the knowledge points of the real exam. 100% real Microsoft exam 70 410 pdf exams and revised by experts!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-410-exam-dumps.html
P.S. 100% Correct 70-410 interactive bootcamp are available on Google Drive, GET MORE: https://drive.google.com/open?id=1gKqa_vO9OeNyYEjdDpkvCkiJIJhS7seE
New Microsoft 70-410 Exam Dumps Collection (Question 12 - Question 18)
Question No: 12
You have a server named Server1. Server1 runs Windows Server 2012 R2. Server1 has a thin provisioned disk named Disk1.
You need to expand Disk1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From File and Storage Services, extend Disk1.
B. From File and Storage Services, add a physical disk to the storage pool.
C. From Disk Management, extend the volume.
D. From Disk Management, delete the volume, create a new volume, and then format the volume.
E. From File and Storage Services, detach Disk1.
Answer: A,B
Explanation:
Step 1 (B): if required add physical disk capacity.
Step 2 (A): Dynamically extend the virtual disk (not volume).
The File and Storage Services role and the Storage Services role service are installed by default, but without any additional role services. This basic functionality enables you to use Server Manager or Windows PowerShell to manage the storage functionality of your servers.
Windows Server 2012 Storage Space subsystem now virtualizes storage by abstracting multiple physical disks into a logical construct with specified capacity.
The process is to group selected physical disks into a container, the so-called storage pool, such that the total capacity collectively presented by those associated physical disks can appear and become manageable as a single and seemingly continuous space. Subsequently storage administrator creates a virtual disk based on a storage pool, configure a storage layout which is essentially a RAID level, and expose the storage of the virtual disk as a drive letter or a mapped folder in Windows Explorer.
The system administrator uses File and Storage Services in Server Manager or the Disk Management tool tore scan the disk, bring the disk online, and extend the disk size.
Question No: 13
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server. You need to prevent Server1 from attempting to resolve Internet host names for the client
computers.
What should you do on Server1?
A. Create a primary zone named u201crootu201d.
B. Create a primary zone named "GlobalNames".
C. Create a forwarder that points to 169.254.0.1.
D. Create a primary zone named u201c.u201d.
Answer: A
Question No: 14
You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.
You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.)
You review the installed features on Server1 as shown in the Features exhibit. (Click the Exhibit button.)
You need to install the Server Graphical Shell feature on Server1.
Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Index 1
B. Index 2
C. Index 3
D. Index 4
Answer: B,D
Explanation:
These images (since they are Full GUI, not CORE), contain the binaries necessary to install all GUI elements.
When you install Windows Server 2012 R2, you can choose between Server Core Installation and Server with a GUI. The u201cServer with a GUIu201d option is the Windows Server 2012 R2 equivalent of the Full installation option available in Windows Server 2008 R2. The u201cServer Core Installationu201d option reduces the space required on disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose the Server Core installation unless you have a particular need for the additional user interface elements and graphical management tools that are included in the u201cServer with a GUIu201d option. For this reason, the Server Core installation is now the default. Because you can freely switch between these options at any time later, one approach might be to initially install the Server with a GUI option, use the graphical tools to configure the server, and then later switch to the Server Core Installation option.
Reference: Windows Server Installation Options
Question No: 15
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2 Datacenter.Server1 is located in an isolated network that cannot access the Internet.
On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012 R2 Essentials and connects to a private virtual network.
After 30 days, you discover that VM1 shuts down every 60 minutes.
You need to resolve the issue that causes VM1 to shut down every 60 minutes. What should you do?
A. OnVM1, run slmgr.exe and specify the /ipk parameter.
B. OnServer1, run slmgr.exe and specify the /rearm-sku parameter.
C. Create a new internal virtual network and attach VM1 to the new virtual network.
D. On Server1, run Add-WindowsFeatureVolumeActivation.
Answer: A
Question No: 16
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?
A. From Server Manager, change the load balancing mode of Team1.
B. Run the New-NetLbfoTeam cmdlet.
C. From Server Manager, add an interface to Team1.
D. Run the Add-NetLbfoTeamMember cmdlet.
Answer: C
Question No: 17
Your network contains an Active Directory domain named contoso.com.
You log on to a domain controller by using an account named Admin1. Admin1 is a member of the Domain Admins group.
You view the properties of a group named Group1 as shown in the exhibit. (Click the Exhibit button.)
Group1 is located in an organizational unit (OU) named OU1.
You need to ensure that you can modify the Security settings of Group1 by using Active Directory Users and Computers.
What should you do from Active Directory Users and Computers?
A. From the View menu, select Users, Contacts, Groups, and Computers as containers.
B. Right-click OU1 and select Delegate Control
C. From the View menu, select Advanced Features
D. Right-click contoso.com and select Delegate Control.
Answer: C
Explanation:
From ADUC select view toolbar then select advanced features. When you open up the ADUC in a default installation of Active Directory, you are only presented with the basic containers. These basic containers include the only organizational unit (OU), which is the Domain Controllers OU, as wellas the other containers such as Users and Computers. To see more in-depth containers, you need to configure the ADUC by going to the View option on the toolbar, then selecting Advanced Features. This will refresh the view within the ADUC and add some new containers. There are no hidden (or Advanced) OUs that will show up when you configure the ADUC in this way.
Question No: 18
Your network contains an Active Directory domain named adatum.com.
You discover that when users join computers to the domain, the computer accounts are created in the Computers container.
You need to ensure that when users join computers to the domain, the computer accounts are automatically created in an organizational unit (OU) named All_Computers.
What should you do?
A. From a command prompt, run the redircmp.exe command.
B. From ADSI Edit, configure the properties of the OU1 object.
C. From Ldp, configure the properties of the Computers container.
D. From Windows PowerShell, run the Move-ADObject cmdlet.
Answer: A
Explanation:
This command redirects the default container for newly created computers to a specified, target organizational unit (OU) so that newly created computer objects are created in the specific target OU instead of in All_Computers.
Reference: http://technet.microsoft.com/en-us/library/cc770619.aspx
100% Up to the minute Microsoft 70-410 Questions & Answers shared by Certifytools, Get HERE: https://www.certifytools.com/70-410-exam.html (New 496 Q&As)
