♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-411 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-411 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-411-exam-dumps.html
Q31. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. All servers run Windows Server 2012 R2.
You need to collect the error events from all of the servers on Server1. The solution must ensure that when new servers are added to the domain, their error events are collected automatically on Server1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On Server1, create a collector initiated subscription.
B. On Server1, create a source computer initiated subscription.
C. From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
D. From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
Answer: B,C
Explanation:
To set up a Source-Initiated Subscription with Windows Server 2003/2008 so that events of interest from the Security event log of several domain controllers can be forwarded to an administrative workstation.
* Group Policy The forwarding computer needs to be configured with the address of the server to which the events are forwarded. This can be done with the following group policy setting:
Computer configuration-Administrative templates-Windows components-Event forwarding-Configure the server address, refresh interval, and issue certificate authority of a target subscription manager.
* Edit the GPO and browse to Computer Configuration | Policies | Administrative Templates | Windows Components | Event Forwarding - Configure the server address, refresh interval, and issuer certificate authority of a target Subscription Manager.
Q32. HOTSPOT
Your network contains a DNS server named Server1 that runs Windows Server 2012 R2. Server1 has a zone named contoso.com. The network contains a server named Server2 that runs Windows Server 2008 R2. Server1 and Server2 are members of an Active Directory domain named contoso.com.
You change the IP address of Server2.
Several hours later, some users report that they cannot connect to Server2.
On the affected users' client computers, you flush the DNS client resolver cache, and the users successfully connect to Server2.
You need to reduce the amount of time that the client computers cache DNS records from contoso.com.
Which value should you modify in the Start of Authority (SOA) record? To answer, select the appropriate setting in the answer area.
Answer:
Q33. Your network contains an Active Directory domain named contoso.com. The domain
contains a domain controller named DC1 that runs Windows Server 2012 R2.
You create an Active Directory snapshot of DC1 each day.
You need to view the contents of an Active Directory snapshot from two days ago.
What should you do first?
A. Run the dsamain.exe command.
B. Stop the Active Directory Domain Services (AD DS) service.
C. Start the Volume Shadow Copy Service (VSS).
D. Run the ntdsutil.exe command.
Answer: A
Explanation:
Dsamain.exe exposes Active Directory data that is stored in a snapshot or backup as a Lightweight Directory Access Protocol (LDAP) server.
: http://technet.microsoft.com/en-us/library/cc772168.aspx
Q34. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed.
An administrator creates a RADIUS client template named Template1.
You create a RADIUS client named Client1 by using Template 1.
You need to modify the shared secret for Client1.
What should you do first?
A. Configure the Advanced settings of Template1.
B. Set the Shared secret setting of Template1 to Manual.
C. Clear Enable this RADIUS client for Client1.
D. Clear Select an existing template for Client1.
Answer: D
Explanation:
Clear checkmark for Select an existing template in the new client wizard.
In New RADIUS Client, in Shared secret, do one of the following:
Bullet Ensure that Manual is selected, and then in Shared secret, type the strong password that is also entered on the RADIUS client. Retype the shared secret in Confirm shared secret.
Q35. Your network contains an Active Directory domain named contoso.com. The domain contains a read-only domain controller (RODC) named RODC1.
You create a global group named RODC_Admins.
You need to provide the members of RODC_Admins with the ability to manage the hardware and the software on R0DC1. The solution must not provide RODC_Admins with the ability to manage Active Directory objects.
What should you do?
A. From Active Directory Site and Services, configure the Security settings of the RODC1 server object.
B. From Windows PowerShell, run the Set-ADAccountControlcmdlet.
C. From a command prompt, run the dsmgmt local roles command.
D. From Active Directory Users and Computers, configure the Member Of settings of the RODC1 account.
Answer: C
Explanation:
RODC: using the dsmgmt.exe utility to manage local administrators One of the benefits of RODC is that you can add local administrators who do not have full access to the domain administration. This gives them the ability to manage the server but not add or change active directory objects unless those roles are delegated. Adding this type of user is done using the dsmdmt.exe utility at the command prompt.
Q36. You have a server named WSUS1 that runs Windows Server 2012 R2. WSUS1 has the Windows Server Update Services server role installed and has one volume.
You add a new hard disk to WSUS1 and then create a volume on the hard disk.
You need to ensure that the Windows Server Update Services (WSUS) update files are stored on the new volume.
What should you do?
A. From the Update Services console, configure the Update Files and Languages option.
B. From the Update Services console, run the Windows Server Update Services Configuration Wizard.
C. From a command prompt, run wsusutil.exe and specify the export parameter.
D. From a command prompt, run wsusutil.exe and specify the movecontent parameter.
Answer: D
Explanation:
Local Storage Considerations
If you decide to store update files on your server, the recommended minimum disk size is 30 GB. However, depending on the synchronization options you specify, you might need to use a larger disk. For example, when specifying advanced synchronization options, as in the following procedure, if you select options to download multiple languages and/or the option to download express installation files, your server disk can easily reach 30 GB.
Therefore if you choose any of these options, install a larger disk (for example, 100 GB).
If your disk gets full, you can install a new, larger disk and then move the update files to the new location. To do this, after you create the new disk drive, you will need to run the WSUSutil.exetool (with the movecontent command) to move the update files to the new disk. For this procedure, see Managing WSUS from the Command Line.
For example, if D:WSUS1 is the new path for local WSUS update storage, D:move. log is the path to the log file, and you wanted to copy the old files to the new location, you would type: wsusutil.exe movecontent D:WSUS1 D:move. Log.
Note: If you do not want to use WSUSutil.exe to change the location of local WSUS update storage, you can also use NTFS functionality to add a partition to the current location of local WSUS update storage. For more information about NTFS, go to Help and Support Center in Windows Server 2003.
Syntax
At the command line %drive%Program FilesUpdate ServicesTools>, type:
wsusutilmovecontentcontentpathlogfile -skipcopy [/?]
The parameters are defined in the following table.
contentpath - the new root for content files. The path must exist.
logfile - the path and file name of the log file to create.
-skipcopy - indicates that only the server configuration should be changed, and that the content files should not be copied.
/help or /? - displays command-line help for movecontent command.
References:
http: //blogs.technet.com/b/sus/archive/2008/05/19/wsus-how-to-change-the-location-where-wsus-stores-updates-locally.aspx
http: //technet.microsoft.com/en-us/library/cc720475(v=ws.10).aspx http: //technet.microsoft.com/en-us/library/cc708480%28v=ws.10%29.aspx http: //technet.microsoft.com/en-us/library/cc720466(v=ws.10).aspx http: //technet.microsoft.com/en-us/library/cc708480%28v=ws.10%29.aspx
Q37. Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2008 R2.
You plan to test Windows Server 2012 R2 by using native-boot virtual hard disks (VHDs).
You have a Windows image file named file1.wim.
You need to add an image of a volume to file1.wim.
What should you do?
A. Run imagex.exe and specify the /append parameter.
B. Run imagex.exe and specify the /export parameter.
C. Run dism.exe and specify the /image parameter.
D. Run dism.exe and specify the /append-image parameter.
Answer: D
Explanation: The Deployment Image Servicing and Management (DISM) tool is a command-line tool that enables the creation of Windows image (.wim) files for deployment in a manufacturing or corporate IT environment. The /Append-Image option appends a volume image to an existing .wim file allowing you to store many customized Windows images in a fraction of the space. When you combine two or more Windows image files into a single .wim, any files that are duplicated between the images are only stored once.
Incorrect:
Not A, Not B: Imagex has been retired and replaced by dism.
Reference: Append a Volume Image to an Existing Image Using DISM
https://technet.microsoft.com/en-us/library/hh824916.aspx
Q38. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Network Policy Server server role installed. The domain contains a server named Server2 that is configured for RADIUS accounting.
Server1 is configured as a VPN server and is configured to forward authentication requests to Server2.
You need to ensure that only Server2 contains event information about authentication requests from connections to Server1.
Which two nodes should you configure from the Network Policy Server console?
To answer, select the appropriate two nodes in the answer area.
Answer:
Q39. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2. Both servers have the DFS Replication role service installed.
You need to configure the DFS Replication environment to meet the following requirements:
. Increase the quota limit of the staging folder.
. Configure the staging folder cleanup process to provide the highest amount of free space possible.
Which cmdlets should you use to meet each requirement? To answer, select the appropriate options in the answer area.
Answer:
Q40. Your network contains a Network Policy Server (NPS) server named Server1. The network contains a server named SQL1 that has Microsoft SQL Server 2008 R2 installed. All servers run Windows Server 2012 R2.
You configure NPS on Server1 to log accounting data to a database on SQL1.
You need to ensure that the accounting data is captured if SQL1 fails. The solution must minimize cost.
What should you do?
A. Implement Failover Clustering.
B. Implement database mirroring.
C. Run the Accounting Configuration Wizard.
D. Modify the SQL Server Logging properties.
Answer: C
Explanation:
In Windows Server 2008 R2, an accounting configuration wizard is added to the Accounting node in the NPS console. By using the Accounting Configuration wizard, you can configure the following four accounting settings:
. SQL logging only. By using this setting, you can configure a data link to a SQL Server that allows NPS to connect to and send accounting data to the SQL server. In addition, the wizard can configure the database on the SQL Server to ensure that the database is compatible with NPS SQL server logging.
. Text logging only. By using this setting, you can configure NPS to log accounting data to a text file.
. Parallel logging. By using this setting, you can configure the SQL Server data link and database. You can also configure text file logging so that NPS logs simultaneously to the text file and the SQL Server database.
. SQL logging with backup. By using this setting, you can configure the SQL Server data link and database. In addition, you can configure text file logging that NPS uses if SQL Server logging fails.