Proper study guides for Most recent Microsoft Administering Windows Server 2012 certified begins with Microsoft 70 411 vce preparation products which designed to deliver the 100% Guarantee 70 411 administering windows server 2012 r2 pdf questions by making you pass the mcp 70 411 test at your first time. Try the free 70 411 exam dumps pdf demo right now.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-411 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-411 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-411-exam-dumps.html
Q11. HOTSPOT
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has two network adapters and is located in a perimeter network.
You need to install the RIP version 2 routing protocol on Server1.
Which node should you use to add the RIP version 2 routing protocol?
To answer, select the appropriate node in the answer area.
Answer:
Q12. You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
Each time a user receives an access-denied message after attempting to access a folder on Server1, an email notification is sent to a distribution list named DL1.
You create a folder named Folder1 on Server1, and then you configure custom NTFS permissions for Folder 1.
You need to ensure that when a user receives an access-denied message while attempting to access Folder1, an email notification is sent to a distribution list named DL2. The solution must not prevent DL1 from receiving notifications about other access-denied messages.
What should you do?
A. From File Explorer, modify the Classification tab of Folder1.
B. From the File Server Resource Manager console, modify the Email Notifications settings.
C. From the File Server Resource Manager console, set a folder management property.
D. From File Explorer, modify the Customize tab of Folder1.
Answer: C
Explanation:
When using the email model each of the file shares, you can determine whether access requests to each file share will be received by the administrator, a distribution list that represents the file share owners, or both.
You can use the File Server Resource Manager console to configure the owner distribution list by editing the management properties of the classification properties.
Reference: http://technet.microsoft.com/en-us/library/jj574182.aspx#BKMK_12
Q13. Your network contains multiple Active Directory sites.
You have a Distributed File System (DFS) namespace that has a folder target in each site.
You discover that some client computers connect to DFS targets in other sites.
You need to ensure that the client computers only connect to a DFS target in their respective site.
What should you modify?
A. The properties of the Active Directory sites
B. The properties of the Active Directory site links
C. The delegation settings of the namespace
D. The referral settings of the namespace
Answer: D
Reference:
http://www.windowsnetworking.com/articles_tutorials/Configuring-DFS-Namespaces.html
Q14. Your network contains one Active Directory domain named contoso.com. The forest functional level is Windows Server 2012. All servers run Windows Server 2012 R2. All client computers run Windows 8.1.
The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. All domain controllers and RODCs are hosted on a Hyper-V host that runs Windows Server 2012 R2.
You need to identify which domain controllers are authorized to be cloned by using virtual domain controller cloning.
Which cmdlet should you use?
A. Get-ADGroupMember
B. Get-ADDomainControllerPasswordReplicationPolicy
C. Get-ADDomainControllerPasswordReplicationPolicyUsage
D. Get-ADDomain
E. Get-ADOptionalFeature
F. Get-ADAccountAuthorizationGroup
Answer: D
Explanation: One requirement for cloning a domain controller is an existing Windows Server 2012 DC that hosts the PDC emulator role. You can run the Get-ADDomain and retrieve which server has the PDC emulator role.
Example: Command Prompt: C:\PS> Get-ADDomain
Output wouldinclude a line such as: PDCEmulator : Fabrikam-DC1.Fabrikam.com
Reference: Step-by-Step: Domain Controller Cloning
http://blogs.technet.com/b/canitpro/archive/2013/06/12/step-by-step-domain-controller-cloning.aspx
Reference: Get-ADDomain
https://technet.microsoft.com/en-us/library/ee617224.aspx
Q15. Your network is configured as shown in the exhibit. (Click the Exhibit button.)
Server1 regularly accesses Server2.
You discover that all of the connections from Server1 to Server2 are routed through Router1.
You need to optimize the connection path from Server1 to Server2.
Which route command should you run on Server1?
A. Route add -p 10.10.10.0 MASK 255.255.255.0 172.23.16.2 METRIC 100
B. Route add -p 10.10.10.0 MASK 255.255.255.0 10.10.10.1 METRIC 50
C. Route add -p 10.10.10.12 MASK 255.255.255.0 10.10.10.1 METRIC 100
D. Route add -p 10.10.10.12 MASK 255.255.255.0 10.10.10.0 METRIC 50
Answer: A
Explanation:
Destination - specifies either an IP address or host name for the network or host.
subnetmask - specifies a subnet mask to be associated with this route entry. If subnetmask is not specified, 255.255.255.255 is used.
gateway - specifies either an IP address or host name for the gateway or router to use when forwarding.
costmetric - assigns an integer cost metric (ranging from 1 through 9,999) to be used in calculating the fastest, most reliable, and/or least expensive routes. If costmetric is not specified, 1 is used.
interface - specifies the interface to be used for the route that uses the interface number. If an interface is not specified, the interface to be used for the route is determined from the gateway IP address.
References: http: //support. microsoft. com/kb/299540/en-us
http: //technet. microsoft. com/en-us/library/cc757323%28v=ws. 10%29. aspx
Q16. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed.
An administrator creates a Network Policy Server (NPS) network policy named Policy1. You need to ensure that Policy1 applies to L2TP connections only.
Which condition should you modify?
To answer, select the appropriate object in the answer area.
Answer:
Q17. HOTSPOT
Your network contains a DNS server named Server1. Server1 hosts a DNS zone for contoso.com.
You need to ensure that DNS clients cache records from contoso.com for a maximum of one hour.
Which value should you modify in the Start of Authority (SOA) record? To answer, select the appropriate setting in the answer area.
Answer:
Q18. You have a server named Server 1.
You enable BitLocker Drive Encryption (BitLocker) on Server 1.
You need to change the password for the Trusted Platform Module (TPM) chip.
What should you run on Server1?
A. Manage-bde.exe
B. Set-TpmOwnerAuth
C. bdehdcfg.exe
D. tpmvscmgr.exe
Answer: B
Explanation:
The Set-TpmOwnerAuthcmdlet changes the current owner authorization value of the Trusted Platform Module (TPM) to a new value. You can specify the current owner authorization value or specify a file that contains the current owner authorization value. If you do not specify an owner authorization value, the cmdlet attempts to read the value from the registry.
Use the ConvertTo-TpmOwnerAuthcmdlet to create an owner authorization value. You can specify a new owner authorization value or specify a file that contains the new value.
Q19. Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to OU1. You
configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user.
You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again. What should you do?
A. Enforce GPO1.
B. Modify the Link1 shortcut preference of GPO1.
C. Enable loopback processing in GPO1.
D. Modify the Security Filtering settings of GPO1.
Answer: B
Explanation:
Replace Delete and recreate a shortcut for computers or users. The net result of the Replace action is to overwrite the existing shortcut. If the shortcut does not exist, then the Replace action creates a new shortcut.
This type of preference item provides a choice of four actions: Create, Replace, Update, and Delete. The behavior of the preference item varies with the action selected and whether the shortcut already exists.
Refernces: http: //technet.microsoft.com/en-us/library/cc753580.aspx http: //technet.microsoft.com/en-us/library/cc753580.aspx
Q20. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012.
You have a Group Policy object (GPO) named GPO1 that contains several custom Administrative templates.
You need to filter the GPO to display only settings that will be removed from the registry when the GPO falls out of scope. The solution must only display settings that are either enabled or disabled and that have a comment.
How should you configure the filter?
To answer, select the appropriate options below. Select three.
A. Set Managed to: Yes
B. Set Managed to: No
C. Set Managed to: Any
D. Set Configured to: Yes
E. Set Configured to: No
F. Set Configured to: Any
G. Set Commented to: Yes
H. Set Commented to: No
I. Set Commented to: Any
Answer: A,F,G
