There is a great interactive forum at Actualtests.com, you can visit this and chat with other candidates. There are in addition valuable information or suggestions given through the former candidates who have handed down the exam. Many of them have summarized your key points and achievable questions that you may encounter in the preparation. Make total use of these kind of great valued preparation materials. Take actions right now and you can find access in your desired result before long. Then you can through away your usefulness books and concentrate about the original Microsoft Microsoft exam demos from Actualtests. Just continue to be at home and obtain your Microsoft certification as easy as possible.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-412 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-412 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-412-exam-dumps.html
2021 Mar 70-412 pdf exam
Q91. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. The servers have the Hyper-V server role installed.
A certification authority (CA) is available on the network.
A virtual machine named vml.contoso.com is replicated from Server1 to Server2. A virtual
machine named vm2.contoso.com is replicated from Server2 to Server1.
You need to configure Hyper-V to encrypt the replication of the virtual machines.
Which common name should you use for the certificates on each server?
To answer, configure the appropriate common name for the certificate on each server in
the answer area.
Answer:
Q92. Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012 R2.
The domain contains four servers. The servers are configured as shown in the following table.
You need to deploy IP Address Management (IPAM) to manage DNS and DHCP.
On which server should you install IPAM?
A. DC1
B. DC2
C. DC3
D. Server1
Answer: D
Explanation:
Explanaton: IPAM cannot be installed on Domain Controllers. All servers, except Server1, have the DC role
Reference: IP Address Management (IPAM) Overview http://technet.microsoft.com/en-us/library/hh831353.aspx
Q93. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains an enterprise certification authority (CA).
The domain contains a server named Server1 that runs Windows Server 2012 R2. You install the Active Directory Federation Services server role on Server1.
You plan to configure Server1 as an Active Directory Federation Services (AD FS) server. The Federation Service name will be set to adfs1.contoso.com.
You need to identify which type of certificate template you must use to request a certificate for AD FS.
Answer:
Q94. HOTSPOT
Your network contains one Active Directory forest named adatum.com. The forest contains a single domain.
The forest contains the domain controllers configured as shown in the following table.
Recently, a domain controller named DC4 was deployed to adatum.com. DC4 is in the Default-First-Site-Name site.
The adatum.com site links are configured as follows.
The schedule for SiteLink1 is shown in the SiteLink1 exhibit. (Click the Exhibit button.)
The schedule for SiteLink2 is shown in the SiteLink2 exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Q95. HOTSPOT
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 have the Hyper-V server role installed.
Server1 and Server2 have different processor models from the same manufacturer.
On Server1, you plan to create a virtual machine named VM1. Eventually, VM1 will be
exported to Server2.
You need to ensure that when you import VM1 to Server2, you can start VM1 from saved
snapshots.
What should you configure on VM1?
To answer, select the appropriate node in the answer area.
Answer:
Up to the minute 70-412 actual test:
Q96. Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed.
Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1.
Server3 currently has no virtual machines.
You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.
Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)
A. The Hyper-V Manager console connected to Server3
B. The Failover Cluster Manager console connected to Server3
C. The Hyper-V Manager console connected to Server1.
D. The Failover Cluster Manager console connected to Cluster1
E. The Hyper-V Manager console connected to Server2
Answer: A,D
Explanation:
A. To configure the Replica server [on a server that is not part of a cluster which in this case is Server3] In Hyper-V Manager, click Hyper-V Settings in the Actions pane. In the Hyper-V Settings dialog, click Replication Configuration.
In the Details pane, select Enable this computer as a Replica server. Etc.
D. To configure a Replica server that is part of a failover cluster.
1. In Server Manager, open Failover Cluster Manager.
2. In the left pane, connect to the cluster, and while the cluster name is highlighted, click Roles in the Navigate category of the Details pane.
3. Right-click the role and choose Replication Settings.
4. In the Details pane, select Enable this cluster as a Replica server. Etc.
Reference: Deploy Hyper-V Replica , Step 2: Enable Replication
http://technet.microsoft.com/en-us/library/jj134240.aspx
Q97. Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domain controllers. The domain controllers are configured as shown in the following table.
An IP site link exits between each site.
You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB.
You need to ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domain controllers in SiteB are unavailable.
What should you do?
A. Create an SMTP site link between SiteB and SiteC.
B. Crate additional connection objects for DC1 and DC2.
C. Decrease the cost of the site link between SiteB and SiteC.
D. Create additional connection objects for DC3 and DC4.
Answer: C
Explanation:
By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteB rather than by SiteA.
Q98. Your network contains an Active Directory domain named adatum.com. The domain contains two sites named Site1 and Site2 and two domain controllers named DC1 and DC2. DC1 is located in Site1 and DC2 is located in Site2.
You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2.
A technician connects DC3 to Site2.
You discover that users in Site2 are authenticated only by DC2.
You need to ensure that the users in Site2 are authenticated by both DC2 and DC3.
What should you do?
A. In Active Directory Users and Computers, configure the msDS-PrimaryComputer attribute for DC3.
B. In Active Directory Users and Computers, configure the msDS-Site-Affinity attribute for DC3.
C. From Active Directory Sites and Services, move DC3.
D. From Active Directory Sites and Services, modify the site link between Site1 and Site2.
Answer: C
Explanation:
DC3 needs to be moved to Site2 in AD DS
Reference: Move a domain controller between sites
http://technet.microsoft.com/en-us/library/cc759326(v=ws.10).aspx
Q99. You create a new virtual disk in a storage pool by using the New Virtual Disk Wizard. You discover that the new virtual disk has a write-back cache of 1 GB.
You need to ensure that the virtual disk has a write-back cache of 5 GB.
What should you do?
A. Detach the virtual disk, and then run the Resize-VirtualDisk cmdlet.
B. Detach the virtual disk, and then run the Set-VirtualDisk cmdlet.
C. Delete the virtual disk, and then run the New-StorageSubSystemVirtualDisk cmdlet.
D. Delete the virtual disk, and then run the New-VirtualDisk cmdlet.
Answer: D
Explanation:
So what about changing the cache size? Well, you can't modify the cache size, but you can specify it at the time that you create a new virtual hard disk. In order to do so, you have to use Windows PowerShell.
New-VirtualDisk –StoragePoolFriendlyName "<storage pool name>" –FriendlyName "<v
Reference: Using Windows Server 2012's SSD Write-Back Cache
Q100. Your network contains one Active Directory domain named contoso.com. The domain contains an IP Address Management (IPAM) server named Server1. Server1 manages several DHCP and DNS servers.
From Server Manager on Server1, you create a custom role for IPAM.
You need to assign the role to a group named IP_Admins.
What should you do?
A. From Windows PowerShell, run the Add-Member cmdlet.
B. From Server Manager, create an access policy.
C. From Windows PowerShell, run the Set-IpamConfiguration cmdlet.
D. From Server Manager, create an access scope.
Answer: B
Explanation: A role is a collection of IPAM operations. You can associate a role with a user or group in Windows using an access policy. Several built-in roles are provided, but you can also create customized roles to meet your business requirements.
Reference: Manage IPAM, Access Control
https://technet.microsoft.com/en-us/library/dn741281.aspx
