Proper study guides for Latest Microsoft Configuring Advanced Windows Server 2012 Services certified begins with Microsoft microsoft 70 412 preparation products which designed to deliver the Actual examcollection 70 412 questions by making you pass the 70 412 vce test at your first time. Try the free mcsa 70 412 demo right now.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-412 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-412 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-412-exam-dumps.html
Q91. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed.
The network contains an enterprise certification authority (CA). All servers are enrolled automatically for a certificate-based on the Computer certificate template.
On Server1, you have a virtual machine named VM1. VM1 is replicated to Server2.
You need to encrypt the replication of VM1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On Server1, modify the Hyper-V Settings.
B. On Server2, modify the settings of VM1.
C. On Server2, modify the Hyper-V Settings.
D. On Server1, modify the settings of VM1.
E. On Server1, modify the settings of the virtual switch to which VM1 is connected.
F. On Server2, modify the settings of the virtual switch to which VM1 is connected.
Answer: B,C
Explanation:
B. Each virtual machine that is to be replicated must be enabled for replication (on the replica server – Server2).
C. To configure the Replica server (here Server2) In Hyper-V Manager, click Hyper-V Settings in the Actions pane. In the Hyper-V Settings dialog, click Replication Configuration. In the Details pane, select Enable this computer as a Replica server. In the Authentication and ports section, select the authentication method. For either authentication method, specify the port to be used (the default ports are 80 for Kerberos over HTTP and 443 for certificate-based authentication over HTTPS). If you are using certificate-based authentication, click Select Certificate and provide the request certificate information.
Etc
Reference: Deploy Hyper-V Replica Step 2: Enable Replication
Q92. HOTSPOT
You have a file server named Server1 that runs Windows Server 2012 R2.
You need to ensure that you can use the NFS Share - Advanced option from the New
Share Wizard in Server Manager.
Which two role services should you install?
To answer, select the appropriate two role services in the answer area.
Answer:
Q93. Your company recently deployed a new Active Directory forest named contoso.com. The forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server 2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?
A. Active Directory Sites and Services
B. DFS Management
C. Repadmin
D. Dfsrdiag
Answer: D
Explanation:
In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force replication immediately by using DFS Management, as described in Edit Replication Schedules. You can also force replication by using the Dfsrdiag SyncNow command. You can force polling by using the Dfsrdiag PollAD command.
Reference: DFS Replication: Frequently Asked Questions (FAQ)
http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072
Q94. DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server 2012 R2.
Server1 and Server3 are located in a site named Site1. Server2 and Server4 are located in a site named Site2. The servers are configured as nodes in a failover cluster named Cluster1.
Dynamic quorum management is disabled.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that users in Site2 can access Cluster1 if the network connection between the two sites becomes unavailable.
What should you run from Windows PowerShell?
To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q95. Information and details provided in a question App1y only to that question.
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1.
Cluster1 hosts a secure web Application named WebApp1. WebApp1 saves user state information locally on each node.
You need to ensure that when users connect to WebApp1, their session state is maintained.
What should you configure?
A. Affinity-None
B. Affinity-Single
C. The cluster quorum settings
D. The failover settings
E. A file server for general use
F. The Handling priority
G. The host priority
H. Live migration
I. The possible owner
J. The preferred owner
K. Quick migration
L. the Scale-Out File Server
Answer: B
Explanation:
Client Affinity NLB offers three types of client affinity to minimize response time to clients and provide generic support for preserving session state. Each affinity specifies a different method for distributing client requests.
Affinity Single: Single Multiple requests from the same client must access the same member; useful for clusters
within an intranet.
This affinity provides the best support for clients that use sessions on an intranet. These
clients cannot use No affinity because their sessions could be disrupted.
Incorrect:
Not A. Affinity none: Multiple requests from the same client can access any member; useful
for clusters that do not store session state information on individual members.
Reference: Using NLB
http://technet.microsoft.com/en-us/library/bb687542.aspx
Q96. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
Scope1, Scope2, and Scope3 are configured to assign the IP addresses of two DNS servers to DHCP clients. The remaining scopes are NOT configured to assign IP addresses of DNS servers to DHCP clients.
You need to ensure that only Scope1, Scope3, and Scopes assign the IP addresses of the DNS servers to the DHCP clients. The solution must minimize administrative effort.
What should you do?
A. Create a superscope and a filter.
B. Create a superscope and scope-level policies.
C. Configure the Server Options.
D. Configure the Scope Options.
Answer: D
Explanation:
Scope options are applied to any clients that obtain a lease within that particular scope.
Active scope option types always apply to all computers obtaining a lease in a given scope
unless they are overridden by class or reserved client settings for the option type.
Incorrect:
Not A, not B. A superscope allows a DHCP server to provide leases from more than one
scope to clients on a single physical network. It is not applicable here.
Not C. If we configure the Server Options and set the DNS Servers then all DHCP clients
would be assigned a DNS server.
Reference: Managing DHCP Options
https://technet.microsoft.com/en-us/library/cc958929.aspx
Q97. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains an enterprise certification authority (CA).
The domain contains a server named Server1 that runs Windows Server 2012 R2. You install the Active Directory Federation Services server role on Server1.
You plan to configure Server1 as an Active Directory Federation Services (AD FS) server. The Federation Service name will be set to adfs1.contoso.com.
You need to identify which type of certificate template you must use to request a certificate for AD FS.
Answer:
Q98. Your network contains an Active Directory domain named adatum.com. The domain contains two sites named Site1 and Site2 and two domain controllers named DC1 and DC2. DC1 is located in Site1 and DC2 is located in Site2.
You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2.
A technician connects DC3 to Site2.
You discover that users in Site2 are authenticated only by DC2.
You need to ensure that the users in Site2 are authenticated by both DC2 and DC3.
What should you do?
A. In Active Directory Users and Computers, configure the msDS-PrimaryComputer attribute for DC3.
B. In Active Directory Users and Computers, configure the msDS-Site-Affinity attribute for DC3.
C. From Active Directory Sites and Services, move DC3.
D. From Active Directory Sites and Services, modify the site link between Site1 and Site2.
Answer: C
Explanation:
DC3 needs to be moved to Site2 in AD DS
Reference: Move a domain controller between sites
http://technet.microsoft.com/en-us/library/cc759326(v=ws.10).aspx
Q99. DRAG DROP
You have two failover clusters named Cluster1 and Cluster2. All of the nodes in both of the
clusters run Windows Server 2012 R2.
Cluster1 hosts two virtual machines named VM1 and VM2.
You plan to configure VM1 and VM2 as nodes in a new failover cluster named Cluster3.
You need to configure the witness disk for Cluster3 to be hosted on Cluster2.
Which three actions should you perform in sequence?
To answer, move the appropriate three actions from the list of actions to the answer area
and arrange them in the correct order.
Answer:
Q100. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed.
Server1 and Server2 are members of a cluster named Cluster1. Cluster1 hosts 10 virtual machines.
When you try to migrate a running virtual machine from one server to another, you receive the following error message: "There was an error checking for virtual machine compatibility on the target node."
You need to ensure that the virtual machines can be migrated from one node to another.
From which node should you perform the configuration?
To answer, select the appropriate node in the answer area.
Answer:
