Your success in Microsoft 70 680 practice test is our sole target and we develop all our 70 680 pdf braindumps in a way that facilitates the attainment of this target. Not only is our 70 680 exam study material the best you can find, it is also the most detailed and the most updated. exam 70 680 Practice Exams for Microsoft Windows microsoft 70 680 are written to the highest standards of technical accuracy.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
Q311. - (Topic 2)
You have 20 client computers. The computers run Windows XP. The computers are joined to a domain.
You plan to perform installation of Windows 7 on the computers.
You need to transfer all users' documents and settings. You must exclude music and video files.
You need to use the minimum amount of administration effort.
What should you do first?
A. Create a config.xml file. Configure a logon script for windows XP computers to launch Windows 7 installations.
B. Modify the migapp.xml file. Configure a logon script for the Windows XP computer to launch Windows 7 installation.
C. Modify the miguser.xml file. Configure a logon script for the Windows XP computer to launch Windows 7 installation.
D. Modify the migdocs.xml file. Configure a logon script for the Windows XP computer to launch Windows 7 installation.
Answer: D
Q312. - (Topic 2)
You have a computer that runs Windows Vista. The hard disk is configured as shown in the exhibit. (Click the Exhibit button.)
You need to install Windows 7 in a dual-boot configuration.
What should you do?
A. From Windows Vista, extend Disk 0 Partition 1. Install Windows 7 in Disk 0 Partition 1.
B. From Windows Vista, create a new partition. Install Windows 7 in Disk 0 Partition 1.
C. Start the computer from the Windows 7 installation media. Install Windows 7 in Disk 0 Partition 1.
D. Start the computer from the Windows 7 installation media. Install Windows 7 in the unallocated space on Disk 0.
Answer: D
Explanation:
The key to configuring dual-booting is ensuring that each operating system has its own partition or hard disk drive.
To dual-boot with Windows 7, you need to be able to create a new volume of at least 15 GB. Even if you have more free space available on the volume you want to shrink, you may not be able to create a volume of the appropriate size because Windows Vista may not be able to move some special types of data to a different place on the hard disk drive.
When configuring a new computer to boot between multiple operating systems, it is also necessary to install operating systems in the order that they were released. For example, if you want to boot between Windows XP and Windows 7 on a new computer, you need to install Windows XP before you install Windows 7. If you install Windows XP after Windows 7, the Windows XP installation routine cannot recognize the Windows 7 operating system installation, and the computer only boots into Windows XP. It is possible to repair the computer from this point using Windows 7 startup repair so that it dual-boots, but the simplest course of action is just to install the operating systems in the order in which they were released by Microsoft.
Q313. - (Topic 1)
You have a computer that runs Windows 7.
Your network contains a DHCP server that runs Windows Server 2008 R2.
The server is configured as a Network Access Protection (NAP) enforcement point.
You need to configure the computer as a NAP client.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From Services, set the Netlogon service Startup Type to Automatic.
B. From Services, set the Network Access Protection Agent service Startup Type to Automatic.
C. From the NAP Client Configuration console, configure the user interface settings.
D. From the NAP Client Configuration console, enable the DHCP Quarantine Enforcement Client.
Answer: B,D
Explanation:
Network Access Protection Network Access Protection (NAP) is a feature in Windows Server 2008 that controls access to network resources based on a client computer's identity and compliance with corporate governance policy. NAP allows network administrators to define granular levels of network access based on who a client is, the groups to which the client belongs, and the degree to which that client is compliant with corporate governance policy. If a client is not compliant, NAP provides a mechanism to automatically bring the client back into compliance and then dynamically increase its level of network access.NAP Client ConfigurationNetwork Access Protection (NAP), a new feature in Windows Vista. and Windows Server. 2008, allows you to control the access of client computers to network resources based on computer identity and compliance with corporate governance policy. To implement NAP, you must configure NAP settings on both servers and client computers. There are three tools that you can use to configure NAP client settings: The NAP Client Configuration console provides a graphical user interface with which you can configure NAP client settings on the local computer or in a configuration file that you can save and apply to other computers. The Netsh commands for NAP client provide a command-line tool that you can use to configure client computers or to create a configuration file that you can save and apply to other computers. If you want to manage NAP client settings on domain member client computers, you can use the Group Policy Management Console and the Group Policy Management Editor. When you configure NAP client settings in Group Policy, these settings are applied on NAP-capable domain member client computers when Group Policy is refreshed.To enable and disable the DHCP enforcement client by using the Windows interface
1. To open the NAP Client Configuration console, click Start, click All Programs, click Accessories, click Run, type NAPCLCFG.MSC, and then click OK.
2. Click Enforcement Clients.
3. Right-click DHCP Enforcement Client, and then click Enable or Disable.Network Access Protection Agent
The Network Access Protection (NAP) agent service collects and manages health information for client computers on a network. Information collected by NAP agent is used to make sure that the client computer has the required software and settings. If a client computer is not compliant with health policy, it can be provided with restricted network access until its configuration is updated. Depending on the configuration of health policy, client computers might be automatically updated so that users quickly regain full network access without having to manually update their computer.
Q314. - (Topic 1)
You have a computer that runs Windows 7.
The IPv6 address of the computer is configured automatically.
You need to identify the IPV6 address of the computer.
What should you do?
A. At the command prompt, run Netstat.
B. At the command prompt run Net config.
C. From the network connection status, click Details.
D. From network connection properties, select Internet Protocol Version 6 (TCP/IPv6) and click Properties.
Answer: C
Explanation: You can view a list of all the connection interfaces (wired and wireless) on a computer by opening Network And Sharing Center and clicking Change Adapter Settings. You can right-click any network connection and select Status. If you click Details on the Local Area Connection Status dialog box, you access the Network Connection Details information box. You can configure wireless connection behavior by clicking Change Adapter Settings in Network And Sharing Center, right-clicking your wireless adapter, and clicking Status. Clicking Details on the Status dialog box displays the adapter configuration.
Q315. - (Topic 3)
You need to create a VPN connection.
What should you do?
A. From Windows Explorer, right-click Computer and then click Map network drive.
B. From Windows Explorer, right-click Computer and then click Add a network location.
C. From Network and Sharing Center, click Set up a new connection or network and then click Set up a new network.
D. From Network and Sharing Center, click Set up a new connection or network and then click Connect to a workplace.
Answer: D
Explanation:
Virtual Private Networks When you create a VPN connection, you need to specify the address of the VPN server that you are connecting to and your authentication credentials. You can create a new VPN connection in the Network And Sharing Center by clicking Set Up A New Connection Or Network and then Connect to a Workplace. When you create a new VPN connection, Windows 7 sets the VPN type to Automatic. You can configure a connection to use a specific VPN protocol, but if you do this, Windows 7 does not try to use other VPN protocols if the protocol you select is not available.
Q316. - (Topic 1)
You have a computer that runs Windows 7.
You perform an image backup.
A virus infects the computer and causes the computer to become unresponsive.
You need to restore the computer as quickly as possible.
What should you do?
A. Start the computer by using the Last Known Good Configuration feature.
B. Start the computer from the Windows 7 DVD and then use the Startup Repair tool.
C. Start the computer from the Windows 7 DVD and then use the System Image Recovery tool.
D. Start the computer from Windows Preinstallation Environment (Windows PE) and then run Imagex.exe.
Answer: C
Q317. - (Topic 2)
You have two portable computers that run Windows 7. The computers are not connected to a network.
The computers are configured as shown in the following table.
You need to transfer a 1-gigabit file from Computer1 to Computer2. What should you do first?
A. On Computer1, create a wireless ad hoc network.
B. On Computer2, configure the Bluetooth File Transfer Wizard to send files.
C. On Computer2, create a network profile to connect to a network named Homegroup.
D. On Computer1, configure the computer to be a member of a workgroup named Homegroup.
Answer: A
Explanation: Wireless Ad Hoc network You can set up a temporary wireless network, or ad hoc network, between two or more computers running Windows 7 (or between computers running Windows 7 and Windows Vista) provided they are all within 30 feet (9 meters) of each other. A WAP is not required to set up an ad hoc network. This enables users to share folders and other resources without needing to connect to an organizational network. On the first computer on the network, you open Network And Sharing Center and click Set Up A New Connection Or Network. You then choose the option Set Up A Wireless Ad Hoc (Computer To Computer) Network. You give the network a name and (if you want) set up a security key so that users joining the network need to supply a password. For WEP, this can be 5 case-sensitive characters, 13 case-sensitive characters, 10 hexadecimal caseinsensitive characters, or 26 hexadecimal case-insensitive characters, depending on security considerations. (If you choose WPA-2 Personal, you can insist on a 64-character password, but by the time everyone has typed it in correctly, the meeting would probably be over.)BluetoothWindows supports Bluetooth version 1.1 and later versions. Windows does not support Bluetooth version 1.0 because that specification lacks several critical updates that Windows requires to support Bluetooth wireless technology well.
Q318. - (Topic 2)
You have a computer that runs Windows 7.
You need to provide standard users the ability to update the drivers for display adapters.
What should you modify from the Local Group Policy?
A. driver installation settings for the user
B. device installation settings for the computer
C. driver installation settings for the computer
D. display settings for the user
Answer: C
Explanation:
To Update the Drivers you need permissions to install drivers. Apply this to the computer for all local users, as opposed to only one user.
Q319. - (Topic 5)
Your company network has a single-domain Active Directory forest. The forest functional level is set to Windows Server 2008 R2. All computers are members of the domain.
You plan to deploy Windows BitLocker Drive Encryption (BitLocker) on portable computers that have Windows 7 Enterprise installed.
You need to be able to automatically back up recovery passwords for BitLocker-protected disk volumes on the portable computers.
What should you do before you start encrypting the disk volumes with BitLocker?
A. Run the cscript Get-TPMOwnerlnfo.vbs script on the client computers.
B. Select the Turn on BitLocker backup to Active Directory option in local policy on the portable computers.
C. Run the cscript Get-BitLockerRecoverylnfo.vbs script on the portable computers.
D. Run the Idifde -i -v -f BitLockerTPMSchemaExtension.ldf -c script on a domain controller.
Answer: B
Q320. HOTSPOT - (Topic 4)
A company is upgrading its client computers from windows XP to windows 7. You add an application to the Windows 7 base image.
Large fonts are interfering with the appearance of the application.
You need to ensure that the application is displayed correctly on client computers that run Windows 7.
Which option should you select? (To answer, select the appropriate check box in the dialog box.)
Answer:
