Proper study guides for Replace Microsoft TS:Windows 7,Configuring certified begins with Microsoft mcts 70 680 preparation products which designed to deliver the Simulation mcts 70 680 questions by making you pass the mcts 70 680 test at your first time. Try the free 70 680 pdf demo right now.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
Q291. - (Topic 5)
You use a desktop computer that has Windows 7 Ultimate SP1. The relevant portions of the computer configuration are shown in the following exhibits:
The Disk Management console (Click the Exhibit button.)
The System Properties window (Click the Exhibit button.)
The System protection for Local Disk C window (Click the Exhibit button.)
You create a password for several Microsoft Office files from your Documents library.
You share the Documents library over a network.
You need to ensure that network users are unable to access the unprotected versions of the files.
What should you do?
A. Delete restore points.
B. Create a restore point.
C. Perform a system restore.
D. Search for the file in the Recycle Bin.
E. Increase disk space used for system protection.
F. Copy the file from a previous version of a folder.
G. Set restore settings to Only restore previous versions of files.
H. Run the cipher /x command from the elevated command prompt.
I. Run the vssadmin list volumes command from the elevated command prompt.
J. Run the vssadmin list shadows command from the elevated command prompt.
K. Run the compact /U <file_name> command from the elevated command prompt.
Answer: A
Q292. - (Topic 1)
Which of the following can be used to increase the physical memory on your Windows 7 PC and increase the speed?
A. PhysiRAM
B. Aero Glass
C. DirectAccess
D. ReadyBoost
Answer: D
Q293. - (Topic 3)
Your network contains an Intrasite Automatic Tunnel Addressing Protocol (ISATAP) router. You run Ipconfig as shown in the exhibit. (Click the Exhibit button.)
Other users on the network receive an IPv6 address for ISATAP.
You need to ensure that your computer receives an IPv6 address for ISATAP.
What should you do?
A. Run Ipconfig /renew6.
B. Run Ipconfig /setclassid6.
C. Start the Net.TCP Port Sharing service.
D. Start the Internet Protocol Helper (IP Helper) service.
Answer: D
Explanation: Internet Protocol Helper (IP Helper) service Provides tunnel connectivity using IPv6 transition technologies (6to4, ISATAP, Port Proxy, and Teredo), and IPHTTPS. If this service is stopped, the computer will not have the enhanced connectivity benefits that these technologies offer. Internet Protocol Helper (IP Helper) assists network administration of the local computer by enabling applications to retrieve information about the network configuration of the local computer, and to modify that configuration. IP Helper also provides notification mechanisms to ensure that an application is notified when certain aspects of the local computer network configuration change.
Q294. - (Topic 6)
A company has Windows 7 Enterprise computers that use BitLocker drive encryption on operating system drives.
You need to configure multi-factor authentication before client computers are booted into Windows.
On each client computer, what should you do?
A. Require the use of a startup key.
B. Implement fingerprint authentication.
C. Implement a Dynamic Password Policy.
D. Implement a Dynamic Access Control policy.
E. Configure a TPM PIN.
Answer: E
Explanation: BitLocker supports multifactor authentication for operating system drives. If you enable BitLocker on a computer that has a TPM version 1.2, you can use additional forms of authentication with the TPM protection. BitLocker offers the option to lock the normal boot process until the user supplies a personal identification number (PIN) or inserts a USB device (such as a flash drive) that contains a BitLocker startup key, or both the PIN and the USB device can be required. These additional security measures provide multifactor authentication and help ensure that the computer will not start or resume from hibernation until the correct authentication method is presented.
Q295. - (Topic 1)
You plan to deploy Windows 7 to 100 computers on your corporate network.
You install Windows 7 on a computer.
You and need to prepare the computer to be imaged.
What should you do before you create the image of the computer?
A. At the command prompt, run the Dism command.
B. At the command prompt, run the Sysprep command.
C. Start the computer from the Windows Preinstallation Environment (Windows PE) and then run the Imagex command.
D. Start the computer from the Windows Preinstallation Environment (Windows PE) and then run the Wpeutil command.
Answer: B
Explanation:
Sysprep
Sysprep is a tool designed for corporate system administrators, OEMs, and others who need to deploy the Windows. XP operating system on multiple computers. After performing the initial setup steps on a single system, you can run Sysprep to prepare the sample computer for cloning. Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged.NOT ImagexImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack.NOT DismDeployment Image Servicing and Management (DISM) is a command-line tool used to service Windows. images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating systemNOT WpeutilThe Windows PE utility (Wpeutil) is a command-line tool that enables you to run various commands in a Windows PE session. For example, you can shut down or restart Windows PE, enable or disable a firewall, set language settings, and initialize a network.
Q296. - (Topic 3)
You plan to deploy Windows 7 by using a virtual hard disk (VHD).
You need to ensure that when a computer starts from the VHD, the Windows 7 installation programs will run the out-of-box-experience (OOBE) portion of the setup.
What should you do?
A. Copy install.wim from the Windows 7 installation media to the VHD.
B. Use ImageX to apply install.wim from the Windows 7 installation media to the VHD.
C. Start the computer by using the Windows 7 installation media and then select Install now.
D. Start the computer by using the Windows Preinstallation Environment (Windows PE) and then run Diskprep.exe.
Answer: B
Explanation:
WIM images are file-based and can be installed on a VHD or placed on a network share for distribution. You can store several images in the same WIM file. Talks about Capturing the Installation onto a Network Share, but still applies. You can capture an image of your reference computer by using Windows PE and the ImageX tool. Then you store that image on a network share. Alternatively, on a computer running Windows 7 Enterprise or Ultimate edition, you can store the image on a VHD and make that VHD bootable. To capture the installation image you have created on your reference computer to a network share, perform the following procedure:
1. Insert your Windows PE media into your reference computer and restart the computer. As before, you may have to override the boot order to boot from the CD/DVD-ROM drive. If so, select the appropriate function key to override the boot order during initial boot.
2. Windows PE starts and opens a command-prompt window. Use the ImageX tool located on your Windows PE media to capture an image of your reference computer installation. For example, if your optical drive is drive E:, your installation is on drive C:, and you want to capture the image on drive D:, you would enter: e:\imagex.exe /capture C: d:\installationimage.wim "my Win7 Install" /compress fast /verify
3. Copy the image to a network location. For example, enter: net use y: \\network_share\images copy d:\myimage.wim y:
4. If necessary, provide network credentials for appropriate network access. Your image is now on volume Y:
Q297. - (Topic 2)
You have a virtual hard disk (VHD) file. You need to view the files in the VHD. The solution must prevent users that log on to your computer from modifying files in the VHD.
What should you do?
A. From Disk Management, attach the VHD as read-only.
B. From Disk Management, convert the VHD to a GPT disk.
C. From Windows Explorer, modify the permissions of the VHD file.
D. From Windows Explorer, modify the read-only attribute of the VHD file.
Answer: A
Q298. - (Topic 2)
Which of the following steps will keep a Microsoft Word shortcut icon on the Taskbar after the next reboot?
A. Copy and paste a Microsoft Word icon to the Taskbar.
B. Right click on the Microsoft Word icon and choose, "Staple to Superbar".
C. Right click on the Microsoft Word icon and choose, "Pin this programm to taskbar".
D. Open Microsoft Word. While the Icon is on the Taskbar, right click the icon and choose, "Pin this program to taskbar".
Answer: D
Q299. DRAG DROP - (Topic 6)
You install Windows 7 Enterprise 64-bit on a client computer and create a reference image.
The image file is stored on your computer and is named C:\Images\StandardDesktop.wim. You discover that a target computer deployed from the reference image is unable to automatically install drivers for some scanners and printers.
The required drivers are located in the C:\Drivers folder on your computer.
You need to include third-party signed drivers into the reference image.
What should you do? (To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.)
Answer:
Q300. - (Topic 4)
A company has a deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) on a Windows 7 client computer.
You capture an image of the client computer.
A new driver is released for the network card that is installed in the client computer.
You need to update the image with the new driver for the network card.
What should you do first?
A. Add a boot image in WDS.
B. Create a capture image in WDS.
C. Run the BCDEdit command.
D. Run the PEImg /Prepcommand.
E. Run the Start /w ocsetup command.
F. Run the Dism command with the/Add-Driver option,
G. Run the Dism command with the /Mount-Wim option.
H. Run the Dism command with the /Add-Package option.
I. Run the ImageX command with the /Mountparameter.
J. Run the DiskPart command and the Attach command option.
K. Use Sysprep with an answer file and set the PersistAMDeviceInstalls option in the answer file to True.
L. Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
M. Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
N. Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
Answer: G
