Act now and download your BICSI IN101_V7 test today! Do not waste time for the worthless BICSI IN101_V7 tutorials. Download Renewal BICSI BICSI Installer 1 Exam exam with real questions and answers and begin to learn BICSI IN101_V7 with a classic professional.
Check IN101_V7 free dumps before getting the full version:
NEW QUESTION 1
Two truck drivers are communicating over a Citizens Band (CB) radio. Only one driver can send a message at a time with this system.
What type of transmission method is used in this example?
- A. Simplex
- B. Half-duplex
- C. Full duplex
Answer: B
NEW QUESTION 2
Which of the following terms is used to describe mechanical firestop systems?
- A. Endothermic
- B. Intumescent
- C. Ablative
- D. Elastomeric
Answer: D
NEW QUESTION 3
How long does it take someone to form a first impression?
- A. 10 to 15 seconds
- B. 1 to 2 minutes
- C. 5 to 10 minutes
- D. 30 minutes to 1 hour
Answer: A
NEW QUESTION 4
The information transmitted by an ICT system can originate in two fundamental forms:
- A. Synchronous and asynchronous
- B. Light and sound
- C. Progressive and regressive
- D. Analog and digital
Answer: D
NEW QUESTION 5
Which of the following tend to cause sheath damage during cable pulling?
- A. FMC/FMT
- B. RMC/IMC
- C. EMT/ENT
Answer: A
NEW QUESTION 6
What is the most appropriate administration class for an infrastructure with multiple telecommunications spaces within one building?
- A. Class 1
- B. Class 2
- C. Class 3
- D. Class 4
Answer: B
NEW QUESTION 7
Which of the following terms describes the ration of the power of the outgoing signal to the power of the reflected signal expressed in decibels?
- A. Mutual capacitance
- B. Characteristic impedance
- C. Insertion loss
- D. Return loss
Answer: D
NEW QUESTION 8
What is the characteristic impedance of Series-6 coaxial cable?
- A. 25 ohms
- B. 50 ohms
- C. 75 ohms
- D. 100 ohms
Answer: C
NEW QUESTION 9
What is the specified performance level for Category 8 cable?
- A. 100 MHz
- B. 250 MHz
- C. 1000 MHz
- D. 2000 MHz
Answer: D
NEW QUESTION 10
Which of the following may provide a demarcation point between the service provider and the customer premises cabling?
- A. Telecommunications room
- B. Work area
- C. Telecommunications enclosure
- D. Entrance facility
Answer: D
NEW QUESTION 11
What is the maximum pull force for four-strand optical fiber?
- A. 222N (50 lbf)
- B. 330 N (75lbf)
- C. 880 N (200 lbf)
Answer: A
NEW QUESTION 12
Unqualified workers must stay AT LEAST ______ from exposed energized conductors operating at 300 to 50,000 V.
- A. 0.3 m (1')
- B. 3 m (10')
- C. 15 m (50")
- D. 30 m (100')
Answer: B
NEW QUESTION 13
Which type of optical fiber cable should be color coded with an Orange outer cable sheath?
- A. MM with a 100 um core diameter
- B. Dispersion-shifted SM optical fiber
- C. Polarization maintain SM optical fiber
- D. SM optical fiber
Answer: A
NEW QUESTION 14
Light pulses in optical fiber cables are subjected to a loss in power as the light pulses travel along the optical fiber. Which of the following terms is used to describe this phenomenon?
- A. Attenuation
- B. Grounding
- C. Crosstalk
- D. Frequency
Answer: A
NEW QUESTION 15
Fall protection is required whenever a person is exposed to a fall hazard more than _____?
- A. 1.2 m (4')
- B. 1.83 m (6')
- C. 2.4 m (8')
- D. 3 m (10')
Answer: B
NEW QUESTION 16
Which type of tester includes a set of modular plugs?
- A. Inductive amplifier
- B. Tone generator
- C. Multimeter
- D. Cable-end locator kit
Answer: D
NEW QUESTION 17
Which of the following attachment methods does BICSI recommend for attaching coaxial
connectors to coaxial cable?
- A. Screw-on
- B. Push-on
- C. Compression
- D. Crimp
Answer: C
NEW QUESTION 18
What is the minimum recommended amount of vertical clearance for open-top cable supports?
- A. 75 mm (3")
- B. 100 mm (4")
- C. 125 mm (5")
- D. 150 mm (6")
Answer: A
NEW QUESTION 19
......
Recommend!! Get the Full IN101_V7 dumps in VCE and PDF From Certshared, Welcome to Download: https://www.certshared.com/exam/IN101_V7/ (New 116 Q&As Version)
