we provide Downloadable Juniper JN0-102 free download which are the best for clearing JN0-102 test, and to get certified by Juniper Junos, Associate (JNCIA-Junos). The JN0-102 Questions & Answers covers all the knowledge points of the real JN0-102 exam. Crack your Juniper JN0-102 Exam with latest dumps, guaranteed!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Juniper JN0-102 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW JN0-102 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/JN0-102-exam-dumps.html
Q11. How does the PFE handle unicast transit traffic destined for an existing forwarding table entry?
A. It sends the traffic through one egress port toward its destination.
B. It sends the traffic through multiple egress ports to all available receivers.
C. It sends the traffic through an internal link to the RE.
D. It sends the traffic to the local system for further processing.
Answer: A
Q12. Which statement is correct about the forwarding table?
A. The forwarding table is stored only on the PFE.
B. The forwarding table contains all known routes.
C. The forwarding table is stored on both the RE and PFE.
D. The forwarding table is stored only on the RE.
Answer: C
Q13. By default, which two statements are true about export routing policies? (Choose two.)
A. Export policies can evaluate only active routes.
B. Export policies can evaluate all routes.
C. Export policies can be applied to the forwarding table.
D. Export policies can be applied directly to interfaces
Answer: A,C
Q14. -- Exhibit --
user@router> show route
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.10.10.91/32 *[Direct/0] 00:09:40 >via lo0.0 10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1 >to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50
Reject
172.16.1.0/24 *[Direct/0] 00:06:09
>via ge-0/0/2.0
172.16.1.1/32 *[Local/0] 00:06:09
Local via ge-0/0/2.0
192.168.0.0/16 *[Aggregate/130] 00:00:06
Reject
192.168.0.0/17 *[Aggregate/130] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
192.168.50.0/24 *[Static/5] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
192.168.51.0/24 *[Static/5] 00:00:06
>to 172.16.1.2 via ge-0/0/2.0
user@router> show configuration policy-options
policy-statement demo {
term 1 {
from {
protocol aggregate;
route-filter 192.168.0.0/16 longer;
}
then accept;
}
}
user@router> show configuration protocols ospf
export demo;
area 0.0.0.0 {
interface ge-0/0/2.0;
}
-- Exhibit --
Given the configuration and routing table shown in the exhibit, which routes will be advertised to OSPF neighbors because of the demo policy?
A. 192.168.0.0/16 only
B. 192.168.0.0/17 only
C. 192.168.0.0/16 and 192.168.0.0/17
D. 192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24
Answer: B
Q15. Which two statements are true of a network mask? (Choose two.)
A. A subnet mask specifies the portion of an IP address that is in a binary format.
B. A subnet mask specifies the portion of an IP address that is in a decimal format.
C. A subnet mask specifies the portion of an IP address that represents a network prefix.
D. A subnet mask specifies the portion of an IP address that represents network hosts.
Answer: C,D
Q16. Which statement describes exception traffic?
A. Exception traffic must be sent to the PFE for processing.
B. Exception traffic enters one ingress port and is sent out multiple egress ports.
C. Exception traffic is rate-limited on the internal link to prevent DoS attacks.
D. Exception traffic is processed after forwarding traffic when congestion exists.
Answer: C
Q17. -- Exhibit --
user@router# run show interfaces terse Interface Admin Link Proto Local fe-0/0/0 up up fe-0/0/0.0 up upinet 10.0.39.2/24 iso mpls fe-0/0/1 up up fe-0/0/1.0 up upinet 10.0.18.2/24 fe-0/0/1.5 down up inet 10.0.19.2/24 -- Exhibit --
An administrator is unable to ping any address on the 10.0.19.0/24 subnet. To identify the problem, the administrator uses the command shown in the exhibit.
Which step should be taken to solve the problem?
A. Check the physical cable.
B. Issue the command activate interfaces fe-0/0/1.5 .
C. Issue the command delete interfaces fe-0/0/1.5 disable.
D. Reconfigure the IP address.
Answer: C
Q18. Which operating system do Juniper Networks MX Series routers use?
A. IOS
B. MX-OS
C. UNIX
D. Junos OS
Answer: D
Q19. What represents the decimal equivalence of 11100111?
A. 195
B. 223
C. 230
D. 231
Answer: D
Q20. Which command will apply a policy to redistribute static routes into OSPF?
A. set protocols ospf import static-routes
B. set protocols ospf export static-routes
C. set routing-options static defaults readvertise
D. set routing-options static route 0.0.0.0/0 readvertise
Answer: B
