Your success in Juniper JN0-103 is our sole target and we develop all our JN0-103 braindumps in a way that facilitates the attainment of this target. Not only is our JN0-103 study material the best you can find, it is also the most detailed and the most updated. JN0-103 Practice Exams for Juniper JN0-103 are written to the highest standards of technical accuracy.
Also have JN0-103 free dumps questions for you:
NEW QUESTION 1
Referring to the exhibit,
***Exhibit is Missing***
which command will change the 172.16.10.1/24 IP address to 172.6.100.1/24 IP address?
- A. Set interfaces ge-0/0/2 unit 0 family inet address 172.16.100.1/24
- B. copy interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
- C. rename interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 to address 172.16.100.1/24
- D. insert interfaces ge-0/0/2 unit 0 family inet address 172.16.10.1/24 before address 172.16.100.1/24
Answer: A
NEW QUESTION 2
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The memory utilization is 28%
- B. The memory utilization is 72%
- C. The CPU kernel utilization is 1%
- D. The 15 minute CPU load average is 99%
Answer: AC
NEW QUESTION 3
How does the PFE determine how to forward transit traffic?
- A. The PFE performs a destination lookup based on its own routing table.
- B. The PFE determines network destinations itself based on the RE’s routing table.
- C. The PFE uses the following table provided by the RE.
- D. The PFE uses the routing table provided by the RE.
Answer: A
NEW QUESTION 4
Referring to the Exhibit,
What information is provided about the route to 192.168.47.0/24? Choose Two
- A. There is a single active route to 192.168.47.0/24
- B. There are two next-hops available to 192.168.47.0/24
- C. There is a single next-hop available to 192.168.47.0/24
- D. There are two active route to 192.168.47.0/24
Answer: AC
NEW QUESTION 5
A packet enters a Junos device. No matching destination entry exists in the forwarding table. How will the device respond?
- A. The RE responds to the source with a destination unreachable notification message
- B. The PFE responds to the destination with a source unreachable notification message
- C. The PFE responds to the source with a destination unreachable notification message
- D. The RE responds to the destination with a source unreachable notification message
Answer: B
NEW QUESTION 6
What configuration parameter on a Junos device modifies the default next-hop resolution behavior of a static route?
- A. Resolve
- B. No-readvertise
- C. Passive
- D. Preference
Answer: A
NEW QUESTION 7
Depending on the device type, Junos is built upon which two OS kernels? (Choose two.)
- A. NetBSD
- B. FreeBSD
- C. Linux
- D. OpenBSD
Answer: BC
NEW QUESTION 8
What are two configurable physical interface properties? (Choose two.)
- A. MTU
- B. address
- C. protocol family
- D. link mode
Answer: AC
NEW QUESTION 9
Which keystroke is used to auto-complete user-defined variables?
- A. Spacebar
- B. Home
- C. Esc
- D. Tab
Answer: D
NEW QUESTION 10
Which two statements describe the connection between control plane and the forwarding plane? Choose Two
- A. No rate limiter is configured by default
- B. A rate limiter is configured by default
- C. Exception traffic is preferred over the control traffic during congestion
- D. Control traffic is preferred over the exception traffic during congestion
Answer: AD
NEW QUESTION 11
How many IP addresses can be configured on a given interface?
- A. one primary and one secondary
- B. one
- C. as many as you want
- D. one primary and multiple secondary
Answer: C
NEW QUESTION 12
What is the default route preference for OSPF internal?
- A. 100
- B. 150
- C. 5
- D. 10
Answer: D
NEW QUESTION 13
You are connected to your Junos device using an SSH connection to the txp0 interface. No other interfaces are currently configured and unreachable from your management network. How would you reestablish communication with the device?
- A. Establish a SSH connection to the loopback interface
- B. Unplug the network cable and plug it back in
- C. Power off and power on the device
- D. Connect to the console of the device
Answer: D
NEW QUESTION 14
What is the minimum system-defined user class required to issue clear commands?
- A. read-only
- B. super-user
- C. operator
- D. authorized
Answer: C
NEW QUESTION 15
Which key could you use to auto-complete a command in the Junos CLI?
- A. Delete
- B. Ctrl+Z
- C. Spacebar
- D. Right Arrow
Answer: C
NEW QUESTION 16
Which two keystrokes are used to auto-complete commands? (Choose two.)
- A. Spacebar
- B. Esc
- C. Tab
- D. End
Answer: AC
NEW QUESTION 17
Click the Exhibit button.
You configured the route filter shown in the exhibit.
In this scenario, which IP addresses would term-One accept?
- A. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the 172.35.0.0/16 and 172.36.0.0/16 subnets.
- B. IP addresses that are part of the 172.35.0.0/16 network only.
- C. IP addresses that are part of the 172.35.0.0/16 network and IP addresses that are in the subnets of 172.35.0.0/16 network.
- D. IP addresses that are part of the 172.35.0.0/16 network, but not IP addresses that are part of the 172.35.0.0/16 network itself.
Answer: B
NEW QUESTION 18
......
Thanks for reading the newest JN0-103 exam dumps! We recommend you to try the PREMIUM 2passeasy JN0-103 dumps in VCE and PDF here: https://www.2passeasy.com/dumps/JN0-103/ (142 Q&As Dumps)
