The actual Pass4sure Juniper study manuals happen to be actively playing an even more and much more natural part in candidates studying existence, that help save enough time for individuals avoid to go to this course. Our own Juniper JN0-633 puts include several simulator exercises questions. The actual simulator exercises questions are usually mixed in to the Security, Professional (JNCIP-SEC) solutions of our Juniper JN0-633 manuals. We all promise an individual you will get the actual achievement deffinately if you work tirelessly with our JN0-633 certification study components. The harder an individual practise the actual Pass4sure JN0-633 puts, the higher tag you can attain. You are able to take Juniper JN0-633 guides or the electronic books anyplace as well as whenever you want in the reason of they all are portable. Pass4sure will assure the actual maximize advantages of clients because of our own high-quality items.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Juniper JN0-633 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW JN0-633 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/JN0-633-exam-dumps.html
2021 Mar JN0-633 test question
Q91. You are asked to implement an IPsec VPN between your main office and a new remote office. The remote office receives its IKE gateway address from their ISP dynamically.
Regarding this scenario, which statement is correct?
A. Configure a fully qualified domain name (FQDN) as the IKE identity.
B. Configure the dynamic-host-address option as the IKE identity.
C. Configure the unnumbered option as the IKE identity.
D. Configure a dynamic host configuration name (DHCN) as the IKE identity.
Answer: A
Q92. Click the Exhibit button.
-- Exhibit–
-- Exhibit --
You are asked to implement NAT to translate addresses between the IPv4 and IPv6 networks shown in the exhibit.
What are three configuration requirements? (Choose three.)
A. Disable SYN checking.
B. Enable IPv6 flow mode.
C. Configure proxy ARP.
D. Configure stateless filtering.
E. Configure proxy NDP.
Answer: B,C,E
Explanation: Reference:http://forums.juniper.net/jnet/attachments/jnet/srx/16228/1/NAT64-Overview.pdf
Q93. You are troubleshooting an SRX240 acting as a NAT translator for transit traffic. Traffic is dropping at the SRX240 in your network.Which three tools would you use to troubleshoot the issue? (Choose three.)
A. security flow traceoptions
B. monitor interface traffic
C. show security flow session
D. monitor traffic interface
E. debug flow basic
Answer: A,B,C
Explanation: Reference: http://kb.juniper.net/InfoCenter/index?page=content&id=KB16110
Q94. You are using logical systems to segregate customers. You have a requirement to enable communication between the logical systems.What are two ways to accomplish this goal? (Choose two.)
A. Use a shared DMZ zone to connect the logical systems together.
B. Use a virtual tunnel (vt-) interface to connect the logical systems together.
C. Use an external cable to connect the ports from the two logical systems.
D. Use an interconnect LSYS to connect the logical systems together.
Answer: C,D
Explanation:
Reference :http://www.juniper.net/techpubs/en_US/junos11.4/information-products/topic-collections/security/software-all/logical-systems-config/index.html?topic-53861.html
Q95. You have recently deployed a dynamic VPN. Some remote users are complaining that they
cannot authenticate through the SRX device at the corporate network. The SRX device serves as the tunnel endpoint for the dynamic VPN.What are two reasons for this problem? (Choose two.)
A. The supported number of users has been exceeded for the applied license.
B. The users are connecting to the portal using Windows Vista.
C. The SRX device does not have the required user account definitions.
D. The SRX device does not have the required access profile definitions.
Answer: A,D
Explanation:
Reference :https://www.juniper.net/techpubs/en_US/junos12.1/information-products/topic-collections/syslog-messages/index.html?jd0e28566.html http://kb.juniper.net/InfoCenter/index?page=content&id=KB16477
Most recent JN0-633 actual exam:
Q96. What is the default action for an SRX device in transparent mode to determine the outgoing interface for an unknown destination MAC address?
A. Perform packet flooding.
B. Send an ARP query.
C. Send an ICMP packet with a TTL of 1.
D. Perform a traceroute request.
Answer: A
Explanation: Reference: http://www.juniper.net/techpubs/software/junos-security/junos-security95/junos-security-swconfig-interfaces-and-routing/understand-l2-forwarding-tables-section.html
Q97. Click the Exhibit button
[edit security]
user@host# show policies global {
policy new-policy { match {
source-address any; destination-address any; application junos-https;
}
then { permit {
application-services { application-firewall { rule-set appfw;
}
}
}
}
}
}
[edit security]
user@host# show application-firewall rule-sets appfw {
rule 1 { match {
dynamic-application junos:SSL;
}
then { permit;
}
}
rule 2 { match {
dynamic-application junos:HTTP;
}
then { reject;
}
}
default-rule { permit;
}
}
Referring to the exhibit, which two statements are correct? (Choose two.)
A. HTTP traffic is permitted.
B. HTTP traffic is dropped.
C. HTTPS traffic is permitted.
D. HTTPS traffic is dropped.
Answer: B,C
Q98. Click the Exhibit button.
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:<1.1.1.100/51303->1.1.1.30/3389;6>
matched filter MatchTraffic:
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:packet [48] ipid = 5015, @423d7e9e Feb 2
09:00:02 09:00:00.1872004:CID-0:RT:---- flow_process_pkt: (thd 1): flow_ctxt type 13, common flag Ox0, mbuf Ox423d7d00
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: flow process pak fast ifl 72 In_ifp fe-0/0/7.0
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: fe-0/0/7.0:1.1.1.100/51303- >1.1.1.30/3389,
top, flag 2 syn
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: find flow: table Ox5258d7b0, hash 17008(Oxffff), sa 1.1.1.100, da 1.1.1.30, sp 51303, dp 3389, proto 6, tok
448
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: no session found, start first path. in_tunnel - 0, from_cp_flag - 0
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: flow_first_create_session
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: flow first_in_dst_nat: in <fe-0/0/7.0>, out
<N/A> dst_adr 1.1.1.30, sp 51303, dp 3389
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: chose interface fe-0/0/7.0 as incoming nat if. Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_rule_dst_xlate: packet 1.1.1.100-
>1.1.1.30 nsp2 0.0.0.0->192.168.224.30.
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_routing: call flow_route_lookup() src_ip 1.1.1.100, x_dst_ip 192.168.224.30, in ifp fe-0/0/7.0, out ifp N/A sp 51303, dp 3389, ip_proto 6, tos 0
Feb 2 09:00:02 09:00:00.1872004:CID-O:RT:Doing DESTINATION addr route-lookup Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: routed (x_dst_ip 192 168.224.30)
from untrust (fe-0/0/7.0 in 0) to ge-0/0/0.0, Next-hop: 192.168.224.30
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: policy search from zone untrust-> zone trust Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: policy has timeout 900
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: app 0, timeout 1800s, curr ageout 20s
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_src_xlate: src nat 0.0.0.0(51303) to
192.168.224.30(3389) returns status 1, rule/pool id 1/2. Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: dip id = 2/0, 1.1.1.100/51303->192.168.224.3/48810
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: choose interface ge-0/0/0.0 as outgoing phy if Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:is_loop_pak: No loop: on ifp: ge-0/0/0.0, addr:
192.168.224.30, rtt_idx:0
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:sm_flow_interest_check: app_id 0, policy 9, app_svc_en 0, flags Ox2. not interested
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:sm_flow_interest_check: app_id 1, policy 9, app_svc_en 0, flags Ox2. not interested
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT:flow_first_service_lookup():
natp(Ox51ee4680): app_id, 0(0).
Feb 2 09:00:02 09:00:00.1872004:CID-0:RT: service lookup identified service O. Referring to the exhibit, which two statements are correct? (Choose two.)
A. The packet being inspected is a UDP packet.
B. The incoming interface is fe-0/0/7.
C. This traffic matches an existing flow.
D. Source NAT is being used.
Answer: B,C
Q99. Click the Exhibit button.
-- Exhibit --
[edit security idp] user@srx# show security-package {
url https://services.netscreen.com/cgi-bin/index.cgi; automatic {
start-time "2012-12-11.01:00:00 +0000";
interval 120; enable;
}
}
-- Exhibit --
You have configured your SRX device to download and install attack signature updates as shown in the exhibit. You discover that updates are not being downloaded.
What are two reasons for this behavior? (Choose two.)
A. No security policy is configured to allow the SRX device to contact the update server.
B. The SRX device does not have a DNS server configured.
C. The management zone interface does not have an IP address configured.
D. The SRX device has no Internet connectivity.
Answer: B,D
Explanation:
Configuration is correct. Only reason is that SRZ device is not able to connect to definition server.
Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB16491
Q100. You want to query User Group membership directly using the integrated user firewall services from an Active Directory controller to an SRX Series device.
Which two actions are required? (Choose two.)
A. Configure the LDAP base distinguished name.
B. Connect the SRX Series device and the MAG Series device in an enforcer configuration.
C. Configure a domain name, the username and password of the domain, and the name and IP address of the domain controller in the domain.
D. Configure the Access Control Service on the MAG Series device for local user authentication and verify that authentication information is transferred between the devices.
Answer: A,C
