Top Precise JN0-633 torrent Tips!

Act now and download your Juniper JN0-633 test today! Do not waste time for the worthless Juniper JN0-633 tutorials. Download Rebirth Juniper Security, Professional (JNCIP-SEC) exam with real questions and answers and begin to learn Juniper JN0-633 with a classic professional.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Juniper JN0-633 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW JN0-633 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/JN0-633-exam-dumps.html

Q61. Given the following session output:

Session ID., Policy namE.default-policy-00/2, StatE.Active, Timeout: 1794, Valid

In: 2001:660:1000:8c00::b/1053 --> 2001:660:1000:9002::aafe/80;tcp, IF.reth0.0, Pkts: 4,

Bytes: 574

Out: 192.168.203.10/80 --> 192.168.203.1/24770;tcp, IF.reth1.0, Pkts: 3, Bytes:

Which statement is correct about the security flow session output?

A. This session is about to expire.

B. NAT64 is used.

C. Proxy NDP is used for this session.

D. The IPv4 Web server runs services on TCP port 24770.

Answer: B

Explanation:

Reference :http://kb.juniper.net/InfoCenter/index?page=content&id=KB22391


Q62. How does the SRX5800, in transparent mode, signal failover to the connected switches?

A. It initiates spanning-tree BPDUs.

B. It sends out gratuitous ARPs.

C. It flaps the impaired interfaces.

D. It uses an IP address monitoring configuration.

Answer: B


Q63. Click the Exhibit button.

-- Exhibit --

[edit forwarding-options] user@srx240# show packet-capture {

file filename my-packet-capture; maximum-capture-size 1500;

}

-- Exhibit --

Referring to the exhibit, you are attempting to perform a packet capture on an SRX240 to troubleshoot an SSH issue in your network. However, no information appears in the packet capture file.

Which firewall filter must you apply to the necessary interface to collect data for the packet

capture?

A. user@srx240# show filter pkt-capture {

term pkt-capture-term { from {

protocol tcp; port ssh;

}

then packet-mode;

}

term allow-all { then accept;

}

}

[edit firewall family inet]

B. user@srx240# show filter pkt-capture {

term pkt-capture-term { from {

protocol tcp; port ssh;

}

then {

count packet-capture;

}

}

term allow-all { then accept;

}

}

[edit firewall family inet]

C. user@srx240# show filter pkt-capture {

term pkt-capture-term { from {

protocol tcp; port ssh;

}

then {

routing-instance packet-capture;

}

}

term allow-all { then accept;

}

}

[edit firewall family inet]

D. user@srx240# show filter pkt-capture {

term pkt-capture-term { from {

protocol tcp; port ssh;

}

then { sample; accept;

}

}

term allow-all { then accept;

}

}

[edit firewall family inet]

Answer: D


Q64. Click the Exhibit button.

Traffic is flowing between the Host-1 and Host-2 devices through a hub-and-spoke IPsec VPN. All devices are SRX Series devices.

Referring to the exhibit, which two statements are correct? (Choose two.)

A. Traffic is encrypted on the Hub device.

B. Traffic is encrypted on the Spoke-2 device.

C. Traffic is not encrypted on the Spoke-2 device.

D. Traffic is not encrypted on the Hub device.

Answer: D


Q65. You are responding to a proposal request from an enterprise with multiple branch offices. All branch offices connect to a single SRX device at a centralized location. The request requires each office to be segregated on the central SRX device with separate IP networks and security considerations. No single office should be able to starve the CPU from other branch offices on the central SRX device due to the number of flow sessions. However, connectivity between offices must be maintained.Which three features are required to accomplish this goal? (Choose three.)

A. Logical Systems

B. Interconnect Logical System

C. Virtual Tunnel Interface

D. Logical Tunnel Interface

E. Virtual Routing Instance

Answer: A,B,D

Explanation:

Reference :http://www.juniper.net/techpubs/en_US/junos12.1x44/topics/concept/logical-systems-interfaces.html

http://www.juniper.net/techpubs/en_US/junos11.4/information-products/topic-collections/security/software-all/logical-systems-config/index.html?topic-57390.html


Q66. What are three advantages of group VPNs? (Choose three.)

A. Supports any-to-any member connectivity.

B. Provides redundancy with cooperative key servers.

C. Eliminates the need for full mesh VPNs.

D. Supports translating private to public IP addresses.

E. Preserves original IP source and destination addresses.

Answer: A,C,E

Explanation:

Reference :http://www.thomas-krenn.com/redx/tools/mb_download.php/mid.x6d7672335147784949386f3d/Manual_Confi guring_Group_VPN_Juniper_SRX.pdf


Q67. Click the Exhibit button.

-- Exhibit–

-- Exhibit --

In the network shown in the exhibit, you want to forward traffic from the employees to ISP1 and ISP2. You want to forward all Web traffic to ISP1 and all other traffic to ISP2. While troubleshooting, you change your filter to forward all traffic to ISP1. However, no traffic is sent to ISP1.

What is causing this behavior?

A. The filter is applied to the wrong interface.

B. The filter should use the next-hop action instead of the routing-instance action.

C. The filter term does not have a required from statement.

D. The filter term does not have the accept statement.

Answer: A

Explanation: Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB24821


Q68. You have installed a new IPS license on your SRX device and successfully downloaded the attack signature database. However, when you run the command to install the database, the database fails to install.What are two reasons for the failure? (Choose two.)

A. The file system on the SRX device has insufficient free space to install the database.

B. The downloaded signature database is corrupt.

C. The previous version of the database must be uninstalled first.

D. The SRX device does not have the high memory option installed.

Answer: A,B

Explanation:

We don’t need to uninstall the previous version to install a new license, as we can update the same. Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB16491. Also high memory option is licensed feature.

The only reason for failure is either there is no space left or downloaded file is corrupted due to incomplete download because of internet termination in between. Reference:http://kb.juniper.net/InfoCenter/index?page=content&id=KB23359


Q69. Click the Exhibit button.

root@host# show system login user user {

uid 2000; class operator;

authentication {

encrypted-password "$1$4s7ePrk5$9S.MZTwmXTV7sovJZFFsw1"; ## SECRET-DATA

]

}

An SRX Series device has been configured for multiple certificate-based VPNs. The IPsec security association used for data replication is currently down . The administrator is a contractor and has the permissions on the SPX Series device as shown in the exhibit

Which command set would allow the administrator to troubleshoot the cause for the VPN being down?

A. set security ipsec traceoptions file ipsec

set security ipsec traceoptions flag security-associations

B. set security ike traceoptions file ike set security ike traceoptions flag ike

C. request security pki verify-integrity-status

D. request security ike debug-enable local <ip of the local gateway> remote <ip of the remote gateway›

Answer: C


Q70. What are the three types of attack objects used in an IPS engine? (Choose three.)

A. signature

B. chargen

C. compound

D. component

E. anomaly

Answer: A,C,E 

Explanation: Reference:http://www.juniper.net/techpubs/en_US/idp5.0/topics/concept/intrusion-detection-prevention-idp-rulebase-attack-object-using.html