It is more faster and easier to pass the Network-Appliance NS0-160 exam by using High value Network-Appliance NetApp Certified Data Administrator, ONTAP questuins and answers. Immediate access to the Up to the minute NS0-160 Exam and find the same core area NS0-160 questions with professionally verified answers, then PASS your exam with a high score now.
Also have NS0-160 free dumps questions for you:
NEW QUESTION 1
An administrator created an SVM for a VMware vSphere 6.5 cluster. For the SVM, the NFS protocol was enabled. Data LIFs were configured with jumbo frames. The nfs01 volume was created and mounted as junction path / nfs01. A VMware export policy that allowed all the hosts of the cluster was applied to the SVM. However, the hosts are unable to mount the volume.
In this scenario, what caused the problem?
- A. NFS v3 is not compatible with ESXi hosts.
- B. The volume is not thin provisioned.
- C. The maximum transmission unit (MTU) was not set properly on the ESXi hosts.
- D. The default export policy needs to allow reads from the ESXi hosts.
Answer: C
NEW QUESTION 2
An administrator is configuring a third-party software for NDMP. The application is targeting the IP of the data LIF of the SVM called “SVM1. “NDMP is configured as the SVM scope. The NDMP service is not enabled for the admin SVM. SVM1 has a user called “Tom” with the backup role. Tom can connect by using SSH to the controller with the credentials that he used to configure the third-party software. The authentication of the third-party software is falling.
In this scenario, what is the reason for the authentication failure?
- A. The NDMP password has not been generated for Tom.
- B. The application is not targeting the IP of the cluster or node management LIF.
- C. The NDMP service is not enabled for the admin SVM.
- D. The user Tom does not belong to the admin SVM.
Answer: C
NEW QUESTION 3
When a write from a SAN host is received, the information is stored within the controller before it is written to the underlying RAID.
In this scenario, which component stores the data?
- A. HBA
- B. FlashCache
- C. Flash Pool
- D. NVRAM
Answer: D
NEW QUESTION 4
Regarding root partitioned disks in an ONTAP system, which three types of objects are associated with ADP? (Choose three.)
- A. array LUN
- B. root partition
- C. container disk
- D. data partition
- E. shared disk
Answer: BCD
NEW QUESTION 5
In which two scenarios would you use a storage pool? (Choose two.)
- A. when providing an SSD caching layer evenly across multiple aggregates
- B. when you need to share an SSD caching layer within an HA pair
- C. when you have an SVM that is running a block protocol
- D. when migrating the aggregate over to the partner node
Answer: AB
NEW QUESTION 6
Which two configuration limits should you verify when you add additional storage to an AFF A300 switchless configuration? (Choose two.)
- A. the supported number of SSD disks for the A300 system
- B. the supported number of shelves
- C. the supported number of HDDs for the A300 system
- D. the supported number of FC initiator ports for the A300 system
Answer: AC
NEW QUESTION 7
If an SVM is renamed and it is participating in an intercluster SVM peer relationship, what is the result?
- A. SVM peers are removed and they need to be re-created.
- B. Snapshot copies are renamed with the new SVM unique identifier.
- C. SnapMirror relationships appear as broken and a resync is required.
- D. Remote clusters are updated with the new peer SVM name.
Answer: A
NEW QUESTION 8
Which three tasks are SVM administrators allowed to perform? (Choose three.)
- A. Configure name services.
- B. Configure an aggregate.
- C. Monitor jobs.
- D. Configure data protocols.
- E. Create a LIF.
Answer: ABC
NEW QUESTION 9
Your manager asks you to upgrade the ONTAP software that is running on the organization’s FAS8200. The FAS8200 is running ONTAP 9.2 and needs to be upgraded to ONTAP 9.5.
In this situation, what is the minimum number of ONTAP upgrades required to accomplish the task?
- A. 3 upgrades; ONTAP 9.2 > ONTAP 9.3 > ONTAP 9.4 > ONTAP 9.5
- B. 1 upgrade; ONTAP 9.2 > ONTAP 9.5
- C. 2 upgrades; ONTAP 9.2 > ONTAP 9.3 > ONTAP 9.5
- D. 4 upgrades; ONTAP 9.2 > ONTAP 9.2P4 > ONTAP 9.3 > ONTAP 9.4P5 > ONTAP 9.5
Answer: C
NEW QUESTION 10
You have a 4-node cluster with 2x AFF A700 controllers and 2x FAS8200 controllers. A volume set to default settings is moved from a FAS8200 to an AFF A700 using the volume move command.
In this scenario, which volume parameter change will allow for data compaction?
- A. space-allocation
- B. security-style
- C. space-guarantee
- D. fractional-reserve
Answer: C
NEW QUESTION 11
What are three tiering policies that are associated with a FabricPool-enables aggregate? (Choose three.)
- A. backup
- B. mirror-vault
- C. local-only
- D. auto
- E. snapshot-only
Answer: ADE
NEW QUESTION 12
When you create a FlexVol volume, which security style is applied by default?
- A. the security style of the root volume of the cluster
- B. UNIX
- C. NTFS
- D. the security style of the SVM root volume
Answer: A
NEW QUESTION 13
A storage administrator wants to convert a switchless cluster to a switched cluster. You need to determine which switches are supported in ONTAP 9.3.
In this scenario, which tool would satisfy the requirement?
- A. Config Advisor
- B. Hardware Universe
- C. OnCommand System Manager
- D. OnCommand Unified Manager
Answer: B
NEW QUESTION 14
You are configuring an FC to allow LUN access to a host system.
In this scenario, a switch needs a zone configuration file that includes which two elements? (Choose two.)
- A. host initiator WWPN
- B. SVM target WWNN
- C. host initiator WWNN
- D. SVM target WWPN
Answer: AD
NEW QUESTION 15
Which three name services does ONTAP support? (Choose three.)
- A. HTTP
- B. local files
- C. LDAP
- D. NIS
- E. SNMP
Answer: BCD
NEW QUESTION 16
Click the Exhibit button.
cluster1::> volume create -vserver vsl –volume voll –aggregate aggr1 –encrypt true Which statement regarding the command shown in the exhibit is true?
- A. The volume will be created and protected on an aggregate using NetApp Storage Encryption (NSE) disks.
- B. The volume will be created and protected using an external Key Management Server.
- C. The volume will be created and protected for Snaplock Enterprise compliance.
- D. The volume will be created and protected using NetApp Volume Encryption (NVE).
Answer: B
NEW QUESTION 17
You want to establish a SnapMirror relationship between two clusters.
In this scenario, which two actions must you perform to accomplish this task? (Choose two.)
- A. Peer the nodes.
- B. Peer the volumes.
- C. Peer the clusters.
- D. Peer the SVMs.
Answer: BD
NEW QUESTION 18
Click the Exhibit button.
You are asked to identify cache hit rates on your FAS8200 HA pair NAS volumes. You need to increase performance of your HDD cluster1_01_aggr1 aggregate.
Referring to the exhibit, which NetApp technology achieves the requirement?
- A. FlexCache
- B. Flash Pool
- C. FabricPool
- D. MAX Data
Answer: B
NEW QUESTION 19
Which three privileges are available to the vsadmin role? (Choose three.)
- A. configuring protocols
- B. managing volumes, except volume moves
- C. setting physical port speeds
- D. managing LUNs
- E. managing aggregates, except aggregate relocate
Answer: ABD
NEW QUESTION 20
What is the purpose of Epsilon?
- A. to monitor cluster health
- B. to be used as a load-balancer for a 2-node cluster
- C. to evaluate the differences in node configurations
- D. to be used as a tie-breaker for a cluster quorum
Answer: D
NEW QUESTION 21
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a Windows 2021 system. After a rescan, the LUN is not visible on the host.
In this scenario, which two statements describe what the administrator must do to solve this problem? (Choose two.)
- A. Create an initiator group (igroup), add the iSCSI IQN, and map the igroup to the LUN.
- B. Create an initiator group (igroup), add the WWPN of the host initiator, and then map the igroup to the LUN.
- C. Disable the ALUA support from the host for the LUN.
- D. Configure the iSCSI service on the Windows 2021 system.
Answer: AC
NEW QUESTION 22
Which management tool would you use to deploy a new instance of Cloud Volumes ONTAP?
- A. OnCommand System Manager
- B. OnCommand Unified Manager
- C. Cloud Volumes Service
- D. OnCommand Cloud Manager
Answer: D
NEW QUESTION 23
Which three actions would be used to upload an image or firmware for ONTAP 9.3? (Choose three.)
- A. Use TFTP.
- B. Use USB.
- C. Use HTTP.
- D. Use FTP.
- E. Use SFTP.
Answer: BCD
NEW QUESTION 24
......
Recommend!! Get the Full NS0-160 dumps in VCE and PDF From Exambible, Welcome to Download: https://www.exambible.com/NS0-160-exam/ (New 91 Q&As Version)
