Up To The Immediate Present SPLK-1002 Free Draindumps For Splunk Core Certified Power User Exam Certification

NEW QUESTION 1

Which method in the Field Extractor would extract the port number from the following event?
| 10/20/2022 - 125.24.20.1 ++++ port 54 - user: admin <web error>

• A. Delimiter
• B. rex command
• C. The Field Extractor tool cannot extract regular expressions.
• D. Regular expression

Answer: B

Explanation:
The rex command allows you to extract fields from events using regular expressions. You can use the rex command to specify a named group that matches the port number in the event. For example:
rex "\+\+\+\+port (?<port>\d+)"
This will create a field called port with the value 54 for the event.
The delimiter method is not suitable for this event because there is no consistent delimiter between the fields. The regular expression method is not a valid option for the Field Extractor tool. The Field Extractor tool can extract regular expressions, but it is not a method by itself.
Reference: 1
Splunk Core Certified Power User | Splunk

NEW QUESTION 2

A report scheduled to run every 15 mins. but takes 17 mins. to complete is in danger of being _____.

• A. skipped or deferred
• B. automatically accelerated
• C. deleted
• D. all of the above

Answer: A

Explanation:
A report that is scheduled to run every 15 minutes but takes 17 minutes to complete is in danger of being skipped or deferred2. This means that Splunk may skip some scheduled runs of the report if they overlap with previous runs that are still in progress or defer them until the previous runs are finished2. This can affect the accuracy and timeliness of the report results and notifications2. Therefore, option A is correct, while options B, C and D are incorrect because they are not consequences of a report taking longer than its schedule interval.

NEW QUESTION 3

What does the following search do?

• A. Creates a table of the total count of users and split by corndogs.
• B. Creates a table of the total count of mysterymeat corndogs split by user.
• C. Creates a table with the count of all types of corndogs eaten split by user.
• D. Creates a table that groups the total number of users by vegetarian corndogs.

Answer: B

Explanation:
The search string below creates a table of the total count of mysterymeat corndogs split by user.
| stats count by user | where corndog=mysterymeat The search string does the following:
It uses the stats command to calculate the count of events for each value of the user field. The stats command creates a table with two columns: user and count.
It uses the where command to filter the results by the value of the corndog field. The where command only keeps the rows where corndog equals mysterymeat.
Therefore, the search string creates a table of the total count of mysterymeat corndogs split by user.

NEW QUESTION 4

A calculated field maybe based on which of the following?

• A. Lookup tables
• B. Extracted fields
• C. Regular expressions
• D. Fields generated within a search string

Answer: B

Explanation:
As mentioned before, a calculated field is a field that you create based on the value of another field or
fields2. A calculated field can be based on extracted fields, which are fields that are extracted from your raw data using various methods such as regular expressions, delimiters or key-value pairs2. Therefore, option B is correct, while options A, C and D are incorrect because they are not types of fields that a calculated field can be based on.

NEW QUESTION 5

Which of the following actions can the eval command perform?

• A. Remove fields from results.
• B. Create or replace an existing field.
• C. Group transactions by one or more fields.
• D. Save SPL commands to be reused in other searches.

Answer: B

Explanation:
The eval command is used to create new fields or modify existing fields based on an expression2. The eval command can perform various actions such as calculations, conversions, string manipulations and more2. One of the actions that the eval command can perform is to create or replace an existing field with a new value based on an expression2. For example, | eval status=if(status="200","OK","ERROR") will create or replac status field with either OK or ERROR depending on the original value of status2. Therefore, option B is correct, while options A, C and D are incorrect because they are not actions that the eval command can perform.

NEW QUESTION 6

In the Field Extractor, when would the regular expression method be used?

• A. When events contain JSON data.
• B. When events contain comma-separated data.
• C. When events contain unstructured data.
• D. When events contain table-based data.

Answer: C

Explanation:
The correct answer is C. When events contain unstructured data.
The regular expression method works best with unstructured event data, such as log files or text messages, where the fields are not separated by a common delimiter, such as a comma or space1. You select a sample event and highlight one or more fields to extract from that event, and the field extractor generates a regular expression that matches similar events in your dataset and extracts the fields from them1. The regular expression method provides several tools for testing and refining the accuracy of the regular expression. It also allows you to manually edit the regular expression1.
The delimiters method is designed for structured event data: data from files with headers, where all of the fields in the events are separated by a common delimiter, such as a comma or space1. You select a sample event, identify the delimiter, and then rename the fields that the field extractor finds1. This method is simpler and faster than the regular expression method, but it may not work well with complex or irregular data formats1.
Reference:
1: Build field extractions with the field extractor - Splunk Documentation

NEW QUESTION 7

When multiple event types with different color values are assigned to the same event, what determines the color displayed for the events?

• A. Rank
• B. Weight
• C. Priority
• D. Precedence

Answer: C

Explanation:
Reference: https://docs.splunk.com/Documentation/SplunkCloud/8.0.2003/Knowledge/Defineeventtypes When multiple event types with different color values are assigned to the same event, the color displayed for the events is determined by the priority of the event types. The priority is a numerical value that indicates how important an event type is. The higher the priority, the more important the event type. The event type with the highest priority will determine the color of the event.

NEW QUESTION 8

Which of the following are required to create a POST workflow action?

• A. Label, URI, search string.
• B. XMI attributes, URI, name.
• C. Label, URI, post arguments.
• D. URI, search string, time range picker.

Answer: C

Explanation:
POST workflow actions are custom actions that send a POST request to a web server when you click on a field value in your search results. POST workflow actions can be configured with various options, such as label name, base URL, URI parameters, post arguments, app context, etc. One of the options that are required to create a POST workflow action is post arguments. Post arguments are key-value pairs that are sent in the body of the POST request to provide additional information to the web server. Post arguments can include field values from your data by using dollar signs around the field names.

NEW QUESTION 9

Which of the following is true about Pivot?

• A. Users can save reports from Pivot.
• B. Users cannot share visualizations created with Pivot.
• C. Users must use SPL to find events in a Pivot.
• D. Users cannot create visualizations with Pivot.

Answer: A

Explanation:
In Splunk, Pivot is a tool that allows you to report on a specific data set without using the Splunk Search Processing Language (SPL™)1. You can use a drag-and-drop interface to design and generate pivots that present different aspects of your data in the form of tables, charts, and other visualizations12.
One of the features of Pivot is that it allows you to save your reports1. This can be useful when you want to reuse a report or share it with others1. Therefore, it’s not true that users cannot share visualizations created with Pivot or that they must use SPL to find events in a Pivot12. It’s also not true that users cannot create visualizations with Pivot, as creating visualizations is one of the main functions of Pivot12.

NEW QUESTION 10

What other syntax will produce exactly the same results as | chart count over vendor_action by user?

• A. | chart count by vendor_action, user
• B. | chart count over vendor_action, user
• C. | chart count by vendor_action over user
• D. | chart count over user by vendor_action

Answer: A

Explanation:
https://docs.splunk.com/Documentation/Splunk/8.1.2/SearchReference/Chart

NEW QUESTION 11

The time range specified for a historical search defines the _________.------questionable on ans

• A. Amount of data shown on the timeline as data streams in
• B. Amount of data fetched from index matching that time range
• C. Time range for the static results

Answer: B

Explanation:
The time range specified for a historical search defines the amount of data fetched from the index matching that time range2. A historical search is a search that runs over a fixed period of time in the past2. When you run a historical search, Splunk searches the index for events that match your search string and fall within the specified time range2. Therefore, option B is correct, while options A and C are incorrect because they are not what the time range defines for a historical search.

NEW QUESTION 12

Which knowledge Object does the Splunk Common Information Model (CIM) use to normalize data. in addition to field aliases, event types, and tags?

• A. Macros
• B. Lookups
• C. Workflow actions
• D. Field extractions

Answer: B

Explanation:
Normalize your data for each of these fields using a combination of field aliases, field extractions, and lookups.
https://docs.splunk.com/Documentation/CIM/4.15.0/User/UsetheCIMtonormalizedataatsearchtime

NEW QUESTION 13

A field alias has been created based on an original field. A search without any transforming commands is then executed in Smart Mode. Which field name appears in the results?

• A. Both will appear in the All Fields list, but only if the alias is specified in the search.
• B. Both will appear in the Interesting Fields list, but only if they appear in at least 20 percent of events.
• C. The original field only appears in All Fields list and the alias only appears in the Interesting Fields list.
• D. The alias only appears in the All Fields list and the original field only appears in the Interesting Fields list.

Answer: B

Explanation:
A field alias is a way to assign an alternative name to an existing field without changing the original field name or value2. You can use field aliases to make your field names more consistent or descriptive across
different sources or sourcetypes2. When you run a search without any transforming commands in Smart Mode Splunk automatically identifies and displays interesting fields in your results2. Interesting fields are fields that appear in at least 20 percent of events or have high variability among values2. If you have created a field alias based on an original field, both the original field name and the alias name will appear in the Interesting Fields list if they meet these criteria2. However, only one of them will appear in each event depending on which one you have specified in your search string2. Therefore, option B is correct, while options A, C and D are incorrect.

NEW QUESTION 14
Consider the following search: Index=web sourcetype=access_combined
The log shows several events that share the same JSESSIONID value (SD404K289O2F151). View the events as a group. From the following list, which search groups events by JSESSIONID?

• A. index=web sourcetype=access_combined SD404K289O2F151 I table JSESSIONID
• B. index=web sourcetype=access_combined JSESSIONID <SD404K289O2F151>
• C. index=web sourcetype=access_combined I highlight JSESSIONID I search SD404K289O2F151
• D. index-web sourcetype=access_combined I transaction JSESSIONID I search SD404K289O2F151

Answer: B

NEW QUESTION 15

These kinds of charts represent a series in a single bar with multiple sections

• A. Multi-Series
• B. Split-Series
• C. Omit nulls
• D. Stacked

Answer: D

Explanation:
Stacked charts represent a series in a single bar with multiple sections. A chart is a graphical representation of data that shows trends, patterns, or comparisons. A chart can have different types, such as column, bar, line, area, pie, etc. A chart can also have different modes, such as split-series, multi-series, stacked, etc. A stacked chart is a type of chart that shows multiple series in a single bar or area with different sections for each series

NEW QUESTION 16

How is an event type created from the search window? (select all that apply)

• A. In the top right corner, click Save As > Event Type.
• B. In an event's detail dropdown, click Event Actions > Build Event Type.
• C. Edit eventtypes.conf and add a new stanza.
• D. Add | eventtype to the SPL and execute the search.

Answer: AC

Explanation:
In Splunk, you can create an event type from the search window by running a search that would make a good event type, then clicking Save As and selecting Event Type1. This opens the Save as Event Type dial you can provide the event type name and optionally apply tags to it1.
You can also create an event type by editing the eventtypes.conf file and adding a new stanza1. Each stanz the eventtypes.conf file represents an event type1. The stanza name is the name of the event type, and
the search attribute specifies the search string that defines the event type1.
It’s important to note that while you can use the eventtype command in a search to find events associated wit a specific event type, adding | eventtype to the SPL and executing the search does not create a new event type1. Similarly, clicking Event Actions > Build Event Type in an event’s detail dropdown does not create new event type1.

NEW QUESTION 17

Which of these is NOT a field that is automatically created with the transaction command?

• A. maxcount
• B. duration
• C. eventcount

Answer: A

NEW QUESTION 18

After manually editing; a regular expression (regex), which of the following statements is true?

• A. Changes made manually can be reverted in the Field Extractor (FX) UI.
• B. It is no longer possible to edit the field extraction in the Field Extractor (FX) UI.
• C. It is not possible to manually edit a regular expression (regex) that was created using the Field Extractor (FX) UI.
• D. The Field Extractor (FX) UI keeps its own version of the field extraction in addition to the one that was manually edited.

Answer: B

Explanation:
After manually editing a regular expression (regex) that was created using the Field Extractor (FX) UI, it is no longer possible to edit the field extraction in the FX UI. The FX UI is a tool that helps you extract fields from your data using delimiters or regular expressions. The FX UI can generate a regex for you based on your selection of sample values or you can enter your own regex in the FX UI. However, if you edit the regex manually in the props.conf file, the FX UI will not be able to recognize the changes and will not let you edit the field extraction in the FX UI anymore. You will have to use the props.conf file to make any further changes to the field extraction. Changes made manually cannot be reverted in the FX UI, as the FX UI does not keep track of the changes made in the props.conf file. It is possible to manually edit a regex that was created using the FX UI, as long as you do it in the props.conf file.
Therefore, only statement B is true about manually editing a regex.

NEW QUESTION 19

A user wants to create a new field alias for a field that appears in two sourcetypes. How many field aliases need to be created?

• A. One.
• B. Two.
• C. It depends on whether the original fields have the same name.
• D. It depends on whether the two sourcetypes are associated with the same index.

Answer: B

NEW QUESTION 20

When should transaction be used?

• A. Only in a large distributed Splunk environment.
• B. When calculating results from one or more fields.
• C. When event grouping is based on start/end values.
• D. When grouping events results in over 1000 events in each group.

Answer: C

NEW QUESTION 21
......