A Review Of Download 350-601 Questions

NEW QUESTION 1
An engineer must allow communication between the APIC controller and an OpenStack OpFlex agent. The agent is running on a compute node directly plugged to a Cisco ACI leaf switch. The engineer must enable and extend Infra VLAN on the port facing the compute and extend the Infra VLAN to the host. Which action must be taken to meet these requirements?

• A. Enable the Infra VLAN on the Interface Profile policy
• B. Enable the Infra VLAN on the Attachable Access Entity Profile.
• C. Add the infra VLAN via the physical domain.
• D. Add the infra VLAN via the VMM domain.

Answer: C

NEW QUESTION 2
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true?

• A. Any commands that have conflicting settings between roles are denied.
• B. Access to a command takes priority over being denied access to a command.
• C. The first role assigned takes precedence over subsequent roles.
• D. The last role assigned takes precedence over previous roles.

Answer: B

Explanation:
Graphical user interface, text, application Description automatically generated

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sec/nxos/ sec/clicfgur.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/security/ cisco_mds9000_security_config_guide_8x/configuring_users_and_common_roles.html

NEW QUESTION 3
Refer to the exhibit

A network administrator experiences these issues with the network:
PC1 is experiencing a buffering problem for video applications
The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet
The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?
.

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 4
A network engineer is deploying a cisco ALL-flash hyperflex solution. Which local storage configuration is required for the operating system and persistent logging?

• A. Two solid state drives
• B. Two SATA drives
• C. One SATA drive
• D. One solid state drive

Answer: D

NEW QUESTION 5
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this
implementation?

• A. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
• B. It always is enabled on 10/100-Mbps native Ethernet ports.
• C. It provides the authentication of peers on the Cisco Nexus switch.
• D. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.

Answer: D

Explanation:
The Data Center Bridging Exchange Protocol (DCBXP) is an extension of LLDP. It is used to announce, exchange, and negotiate node parameters between peers. DCBXP parameters are packaged into a specific DCBXP TLV. This TLV is designed to provide an acknowledgement to the received LLDP packet. DCBXP is enabled by default, provided LLDP is enabled. DCBXP is disabled on ports where LLDP transmit or receive is disabled. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/layer2/503_n2_1/b_Cisco_n5k_layer2

NEW QUESTION 6
Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex Node types on the right. Not all options are used.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 7
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?

• A. Fibre Channel traffic is monitored only on one vHBA per server.
• B. The destination port for monitoring must be an unassigned Fibre Channel port.
• C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
• D. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.

Answer: D

Explanation:
You can monitor Fibre Channel traffic using either a Fibre Channel traffic analyzer or an Ethernet traffic analyzer. When Fibre Channel traffic is monitored with an Ethernet traffic monitoring session, at an Ethernet destination port, the destination traffic is FCoE. The Cisco UCS 6300 Fabric Interconnect supports FC SPAN only on the ingress side. A Fibre Channel port on a Cisco UCS 6248 Fabric Interconnect cannot be configured as a source port.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System- Monitoring/3-2/b_UCSM_GUI_System_Monitoring_Guide_3_2/ b_UCSM_GUI_System_Monitoring_Guide_3_2_chapter_01101.pdf

NEW QUESTION 8
An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration. The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials. Which protocol must be configured on the switches to allow automated onboarding?

• A. SNMP
• B. Telnet
• C. SSH
• D. HTTPS

Answer: C

NEW QUESTION 9
A cisco Nexus 9000 series switch experiences a startup configuration comuption. The engineer must implement a procedure to recover configuration file from the switch. Which command set must be used?

• A. * 1. Copy the running-configuration to the startup configuration.* 2. Clear the current configuration of the switch.* 3. Restart the device.* 4. Copy a previously saved configuration file to the running configuration.
• B. * 1. Clear the current configuration of the switch* 2. Restart the device.* 3. Copy the running configuration to the startup configuration* 4. Copy a previously saved configuration file to the running configuration
• C. * 1. Clear the current configuration of the switch* 2. Restart the device.* 3. Copy a previously saved configuration file to the running-configuration* 4. Copy the running-configuration to the startup configuration.
• D. * 1.Restarting device.* 2. Copy the running-configuration file to a remote server.* 3. Clear the current configuration of the switch.* 4. Copy the running configuration to the startup configuration

Answer: C

Explanation:
Problems, such as memory corruption, can occur that make it necessary for you to recover your configuration from a backed-up version.
Each time that you enter a copy running-config startup-config command, a binary file is created and the ASCII file is updated. A valid binary configuration file reduces the overall boot time significantly. A binary file cannot be uploaded, but its contents can be used to overwrite the existing startup configuration. The write erase command clears the binary file.
SUMMARY STEPS
* 1. write erase
* 2. reload
* 3. copy configuration-file running-configuration
* 4. copy running-config startup-config https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/fundamentals/configuration/guide

NEW QUESTION 10
Refer to the exhibit

An engineer must mirror the traffic on a switch The engineer locates the server port that requires monitoring on switch1, but the packet sniffer is on switch2 The engineer must configure the source IP address on switch1 Much command accomplishes this goal?

• A. monitor session 10 type erspan-source
• B. monitor erspon origin ip-address 209.165.200.225
• C. source ip 209.165.200.225
• D. source interface vbn512

Answer: B

NEW QUESTION 11
An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers. Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers?

• A. vpc local role-priority 4000
• B. peer-switch
• C. system-mac 0123.4567.89ab
• D. peer-gateway

Answer: B

Explanation:
Peer-Switch feature allows the vPC peers use the same STP root ID as well as the same bridge ID.

NEW QUESTION 12
Refer to the exhibit.

A network engineer is setting up a multihomed OTV network. The first site has been set up with a primary and secondary adjacency server. Which configuration must be added on the remote OTV AEDs site?

• A. interface Overlay200otv join-interface Ethernet1/2 otv extend-vlan 178, 2500-2563otv use-adjacency-server 20.1.1.1 unicast-only
• B. interface Overlay200otv join-interface Ethernet1/2 otv extand-vlan 178, 2500-2563otv adjacency-server unicast-only
• C. interface Overlay200otv join-interface Ethernet1/2 otv extend-vlan 178, 2500-2563
• D. interface Overlay200otv join-interface Ethernet1/2 otv extend-vlan 178, 2500-2563otv use-adjacency-server 20.1.1.1 20.2.1.1 unicast-only

Answer: D

NEW QUESTION 13
An engineer performs a Cisco UCS C480 ML M5 installation from a Cisco UCS Manager As a part of the design the server must perform an iSCSI bool from the storage array Which configuration must be performed in the SAN settings in the root organization to satisfy that condition?

• A. Implement a WWPN pool
• B. Create a virtual iSCSI vNIC
• C. Enable a host SAN pool
• D. Create an IQN suffix pool

Answer: D

NEW QUESTION 14
Refer to the exhibit

A network engineer must run a continuous capture on a port A script called ''capture'1 is created to start and stop the capture task Which command sequence makes the capture persistent after a reboot?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 15
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to 1500 and then generable a massage. What configuration will accomplish this task?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

Explanation:
The following example modifies an overridden policy by changing the number of FCNS database entries to 1500. It also generates both the configured and the default syslog messages of the default system policy event manager applet fcns_policy override fcns_entries_max_per_switch
event fcns entries max-per-switch 1500 action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit.

NEW QUESTION 16
A network engineer must restore the running configuration on a Cisco Nexus 5000 Series Switch to an existing snapshot called “stable1”. The restore procedure should proceed only if no errors occur. Which configuration should be used to accomplish this goal?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 17
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.)

• A. Boot Policy
• B. Global Policy
• C. Power Control Policy
• D. Maintenance Policy
• E. Reboot Policy

Answer: DE

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem

NEW QUESTION 18
Refer to the exhibit.


Why does the python code for Cisco NX-API print an error message?

• A. The “type” is wrong in the header of the request and should be “cli_ conf”.
• B. NX-API does not allow configuration for features via the requests module.
• C. The “type” is wrong is the body of the request and should be “cli_ conf”.
• D. The JSON is not a supported format for the NX-API.

Answer: C

Explanation:
"Commands that belong to different message types should not be mixed. For example, show commands are cli_show message type and are not supported in cli_conf mode." https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/ cisco_nexus7000_programmability_guide_8x/b-cisco-nexus7000-programmability-guide- 8x_chapter_011.html
the payload "type" value is wrong in the body of the request. For the request to be successful, it should be changes to "cli_conf".
For example, if we run the same request with the updated payload:
{
"ins_api": { "version": "1.0",
"type": "cli_conf",
"chunk": "0",
"sid": "1",
"input": "configure terminal ;feature hsrp", "output_format": "json"
}
}
We get a 200 response:
{
"ins_api": { "sid": "eoc",
"type": "cli_conf",
"version": "1.0", "outputs": {
"output": [
{
"code": "200",
"msg": "Success",
"body": {}
},
{
"code": "200",
"msg": "Success",
"body": {}
}
]
}
}
}
CLI verification: nxos9kv# sh run | inc hsrp feature hsrp

NEW QUESTION 19
An engineer is implementing a Cisco ACI fabric and must use static VLAN range as part of a VMM deployment. The static VLAN must be incorporated into the dynamic VLAN pool. The existing VLAN pool is set for dynamic allocation. Which action accomplishes this goal?

• A. Add the VLAN to the pool configured with Inherit Allocation Mode from parent.
• B. Change the existing VLAN pool to static allocation mode.
• C. Add a static VLAN allocation range to the VLAN pool.
• D. Create a static reservation within the dynamic VLAN pool.

Answer: C

NEW QUESTION 20
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?

• A. NX-OS JSON-RPC
• B. NX-API Sandbox
• C. Guest Shell for NX-OS
• D. Open NX-OS

Answer: B

Explanation:
https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox

NEW QUESTION 21
......