Top 16 study guides 70-342 for IT specialist (33 to 48)

Question No. 33

 (Topic 6) 

You have an Exchange Server 2013 organization that is integrated with Microsoft Lync 

Server 2013. 

You need to generate a report that shows the statistics of all the calls received or placed by the Mailbox servers during the last 12 month. 

Which cmdlet should you use? 

A. Get-UMPhone Session 

B. Get-UMService 

C. Get-UMCallDataRecord 

D. Get-UMCallSummaryReport 

Answer:

Explanation: 

The Get-UMCallSummaryReport cmdlet displays the aggregated statistics about all calls received or placed by Mailbox servers running the Microsoft Exchange Unified Messaging service in an organization including voice messages, missed calls, subscriber access, auto attendant, or fax calls. 

Parameters include GroupBy. The GroupBy parameter displays the daily statistics for the last 90 days, monthly statistics for the last 12 months, or a summary of all call statistics for your Mailbox servers running the Microsoft Exchange Unified Messaging service in your organization. 

Reference: Get-UMCallSummaryReport 

https://technet.microsoft.com/en-us/library/ff459267(v=exchg.150).aspx 


Question No. 34

HOTSPOT - (Topic 6) 

You have an Exchange Server 2013 organization that contains two servers named EX1 and EX2. Both servers are in the same Active Directory site. 

You run Get-TransportConfig | fi “shadow” and you receive the following output. 


Use the drop-down menus to select the answer choice that completes each statement. 


Answer: 



Question No. 35

HOTSPOT - (Topic 1) 

You need to ensure that the HR1 group can perform the tasks required to meet the 

technical requirements. 

To which group should you add HR1? 

To answer, select the appropriate group in the answer area. 


Answer: 



Question No. 36

 (Topic 6) 

Your company has a data center in New York and a data center in Miami. 

The company has an Exchange Server 2013 organization that contains a database availability group (DAG). The DAG contains servers in both data centers. 

The company plans to deploy Outlook Anywhere to all users. 

You configure the following: 

. All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com. 

. All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com. 

. In each data center, a certificate from an enterprise certification authority (CA) is 

configured to contain the following: 

. A certificate principal name of mail.contoso.com . Subject alternate names of mail.contoso.com and miami.mail.contoso.com 

You need to recommend which task must be performed to meet the following requirements: 

. Users always must attempt to connect first to a server in the data center where their mailbox is located. . Users must be able to access their mailbox if a single data center fails. 

What should you recommend? 

A. Change the external host name of the Miami data center to mail.contoso.com. 

B. Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers. 

C. Run the Set-OutlookProvider cmdlet. 

D. Run the Add-AvailabilityAddressSpace cmdlet. 

Answer:

Explanation: 

* The Set-OutlookProvider cmdlet creates the global settings for the Autodiscover service. It sets the AutoDiscoverConfig object under the Global Settings object in Active Directory and sets the attributes specified in the parameters listed in the Parameters section. 

* The AutoDiscover feature in Exchange 2007/2010 is often overlooked during setup but is 

an important factor in ensuring smooth day to day running of your Exchange environment. Its main function is to provide the mail client with all the configuration options it needs, from only the user's email address and password. This is particularly useful for remote users and smartphone users, who no longer have to enter advanced settings like server names and domains. It is also vital for the correct functioning of features such as Out Of Office and the Offline Address Book in Outlook. 


Question No. 37

 (Topic 6) 

You have an Exchange Server 2013 organization. 

The human resources (HR) department has a custom form used to enter the personal information of employees. The form uses the Microsoft Word format. 

You need to encrypt the contents of the form automatically when users in the HR department send the form to users outside the organization. 

You deploy an Active Directory Rights Management Services (AD RMS) template. 

Which two of the following should you create next? Each correct answer presents a complete solution. 

A. an Outlook protection rule. 

B. a Mail Tip 

C. a DLP policy template. 

D. a Policy Tip. 

Answer: A,C 


Question No. 38

HOTSPOT - (Topic 2) 

You need to recommend a database availability group (DAG) design that meets the 

technical requirements. 

Which DAG design should you recommend? 

To answer, select the appropriate design in the answer area. 


Answer: 



Question No. 39

 (Topic 2) 

You need to recommend a solution to ensure that the store managers meet the compliance requirements. 

What should you include in the recommendation? 

A. Retention tags and retention policies 

B. Deleted item retention 

C. An in-place hold 

D. Personal archives 

Answer:

Explanation: 

* Scenario: All store managers must be prevented from permanently deleting email messages from their Inbox. 

* In Exchange 2013, you can use In-Place Hold to accomplish the following goals: Place user mailboxes on hold and preserve mailbox items immutably Preserve mailbox items deleted by users or automatic deletion processes such as MRM 

* Preserve items indefinitely or for a specific duration Etc. 

Reference: n-Place Hold and Litigation Hold 


Question No. 40

 (Topic 6) 

You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed. 

You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers. 

What should you do first? 

A. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the PrivateKeyExportable parameter. 

B. On all of the Client Access servers, run the Get-ExchangeCertificate cmdlet. 

C. On one of the Client Access servers, run the New-ExchangeCertificate cmdlet and specify the BinaryEncoding parameter. 

D. On one of the Client Access servers, start the Certificates console and run the Certificate Import Wizard. 

Answer:

Explanation: 

We need to create a new certificate. We make it exportable. 

Note: 

Use the New-ExchangeCertificate cmdlet to create a self-signed certificate, renew an 

existing self-signed certificate, or generate a new certificate request for obtaining a 

certificate from a certification authority (CA). 


Question No. 41

 (Topic 6) 

You have an Exchange Server 2013 organization that contains the servers configured as shown in the following table. 


All mailbox servers are members of a database availability group (DAG) named DAG1. DAG1 has Datacenter Activation Coordination (DAC) mode enabled. The data center in Dallas experiences a power failure, causing quorum to be lost. 

You need to mount the databases in the data center in Houston. 

Which command should you run first? 

A. Stop-DatabaseAvailabilityGroup -Identity DAG1 -MailboxServer EX1 -ConfigurationOnly. 

B. Restore-DatabaseAvailabilityGroup -Identity DAG1 -ActiveDirectorySite Exchange-Site –AlternateWitnessServer -AlternateWitnessDirectory D:\DAG1 

C. Stop-DatabaseAvailabilityGroup -Identity DAG1 -ActiveDirectorySite Exchange-Site 

D. Stop-Service -DisplayName ClusSvc -Force. 

Answer:

Explanation: 

First step: Terminating a Partially Failed Datacenter When the DAG is in DAC mode, the specific actions to terminate any surviving DAG members in the primary datacenter are as follows: The DAG members in the primary datacenter must be marked as stopped in the primary datacenter. Stopped is a state of Active Manager that prevents databases from mounting, and Active Manager on each server in the failed datacenter is put into this state by using the Stop-DatabaseAvailabilityGroup cmdlet. 

Reference: Datacenter Switchovers 

https://technet.microsoft.com/en-us/library/dd351049(v=exchg.150).aspx 


Question No. 42

 (Topic 6) 

You need to ensure that users in the organization are notified before they send email messages to external recipients. 

Which cmdlet should you run? 

A. Set-Mailbox. 

B. Set-OrganizationConfig. 

C. Set-TransportAgent. 

D. Set-TransportConfig. 

Answer:


Question No. 43

 (Topic 2) 

You deploy a new certificate to a Client Access server. 

You test the new certificate by using Outlook Anywhere from the Internet. 

The test generates certificate errors. 

You need to prevent the errors from reoccurring. 

To which two stores should you add the root CA certificate? (Each correct answer presents part of the solution. Choose two.) 

A. the personal store on the client computers 

B. the personal store on the Client Access server 

C. the personal store on the Mailbox servers 

D. the Trusted Root Certification Authorities store on the client computers 

E. the Trusted Root Certification Authorities store on the Client Access server 

F. the Trusted Root Certification Authorities store on the Mailbox servers 

Answer: D,E 

Explanation: 

D: Outlook Anywhere won't work with a self-signed certificate on the Client Access server. Self-signed certificates must be manually copied to the trusted root certificate store on the client computer or mobile device. When a client connects to a server over SSL and the server presents a self-signed certificate, the client will be prompted to verify that the certificate was issued by a trusted authority. The client must explicitly trust the issuing authority. If the client confirms the trust, then SSL communications can continue. 

E: If you are providing external access to Autodiscover by using Outlook Anywhere you must install a valid SSL certificate on the Client Access server. 


Question No. 44

 (Topic 6) 

You have an Exchange Server 2013 organization. 

You successfully migrate the public folders from a previous version of Exchange Server. 

You discover that one of the public folder mailboxes almost reached its quota size. 

You need to move some of the public folders in the public folder mailbox to another public folder mailbox. 

What should you run? 

A. Merge PublicFolderMailbox.ps1 

B. Set-MailPublicFolder 

C. New-PublicFolderMigrationRequest 

D. New-PublicFolderMoveRequest 

Answer:

Explanation: 

* If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don’t contain subfolders, you can use the PublicFolderMoveRequest cmdlets. 

* Use the New-PublicFolderMoveRequest cmdlet to begin the process of moving public folder contents between public folder mailboxes. Moving public folders only moves the physical contents of the public folder; it doesn't change the logical hierarchy. When the move request is completed, you must run the Remove-PublicFolderMoveRequest cmdlet to remove the request or wait until the time specified in the CompletedRequestAgeLimit parameter has passed. The request must be removed before you can run another move request. 


Question No. 45

HOTSPOT - (Topic 6) 

You manage an Exchange Server 2013 organization that has an organization relationship with a partner company named Contoso, LTD. 

Contoso has an Exchange Server 2013 organization and has Microsoft Outlook 2013 deployed to all users. 

You run the Get-OrganizationRelationship | fl and you receive the following output. 


Use the drop-down menus to select the answer choice that completes each statement. 


Answer: 



Question No. 46

 (Topic 6) 

Your company has an Exchange Server 2013 organization named adatum.com. 

You purchase an Office 365 subscription and configure a hybrid deployment. 

All recipients have an email address that contains a SMTP suffix of adatum.com. 

You discover that all of the email messages sent to the Internet from users who have Office 365 mailboxes are routed through the on-premises Exchange servers. 

You need to ensure that all of the email messages are sent directly to the Internet. 

What should you do? 

A. Modify the Send connector. 

B. Run the Hybrid Configuration wizard. 

C. Create a new Sharing policy. 

D. Modify an organization relationship. 

Answer:

Explanation: 

Creating and configuring a hybrid deployment with the Hybrid Configuration wizard is now a single process in Microsoft Exchange Server 2013. 

Note: A hybrid deployment offers organizations the ability to extend the feature-rich experience and administrative control they have with their existing on-premises Microsoft Exchange organization to the cloud. A hybrid deployment provides the seamless look and feel of a single Exchange organization between an on-premises Exchange Server 2013 organization and Exchange Online in Microsoft Office 365. In addition, a hybrid deployment can serve as an intermediate step to moving completely to an Exchange Online organization. 


Question No. 47

 (Topic 6) 

You plan to deploy 20 Client Access servers that will have Exchange Server 2013 installed. 

You need to prepare the certificate required for the planned deployment. The solution must ensure that the same certificate can be used on all of the Client Access servers. 

What should you do first? 

A. From the Exchange Admin Center, create a new certificate request. 

B. On each Client Access server, start the Certificates console and run the Certificate Import Wizard. 

C. On all of the Client Access servers, delete the default self-signed certificates. 

D. On one of the Client Access servers, run the Remove-ExchangeCertificate cmdlet. 

Answer:

Explanation: 

You can use the EAC to generate certificate requests that work with most certificate 

issuers. 

Note: 

To prevent clients from receiving errors regarding untrusted certificates, the certificate 

that's used by your Exchange server must be issued by someone that the client trusts. 

Although most clients can be configured to trust any certificate or certificate issuer, it's 

simpler to use a trusted third-party certificate on your Exchange server. This is because most clients already trust their root certificates. There are several third-party certificate issuers that offer certificates configured specifically for Exchange. 


Question No. 48

 (Topic 6) 

You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. 

The network does not have Active Directory Federation Services (AD FS) 2.0 installed. 

A user named User1 reports that he cannot access his mailbox because his account is 

locked out. 

You verify that the mailbox of User1 is hosted on Office 365. 

You need to unlock the account of User1. 

Which cmdlet should you run? 

A. Set-MailUser 

B. Set-MSolUser 

C. Set-Mailbox 

D. Set-ADUser 

Answer:

Explanation: 

Applies To: Office 365, Windows Azure, Windows Intune The Set-MsolUser cmdlet is used to update a user object. Parameters include: 

-BlockCredential <Boolean> 

When true, the user will not be able to sign in using their user ID. 

Incorrect: 

Not C: Set-Mailbox 

Use the Set-Mailbox cmdlet to modify the settings of an existing mailbox. Applies to: Exchange Server 2013, Exchange Online