Proper study guides for Down to date Microsoft TS:Windows 7,Configuring certified begins with Microsoft 70-680 preparation products which designed to deliver the Exact 70-680 questions by making you pass the 70-680 test at your first time. Try the free 70-680 demo right now.
2021 Mar 70-680 exam question
Q331. - (Topic 2)
You have a computer that runs Windows 7. You connect to your company's network by using a VPN connection.
You discover that when you establish the VPN connection, you are unable to access Internet Web sites.
When you disconnect the VPN connection, you can access Internet Web sites.
You need to access Internet Web sites while you are connected to the VPN.
What should you do?
A. Configure the VPN connection to use only PPTP.
B. Configure the VPN connection to use only L2TP/IPSec.
C. From the Internet Protocol Version 4 (TCP/IPv4) properties of the local area connection, disable the Automatic metric setting.
D. From the Internet Protocol Version 4 (TCP/IPv4) properties of the VPN connection, disable the Use default gateway on remote network setting.
Answer: D
Explanation:
To prevent the default route from being created In the properties of the TCP/IP protocol of the dial-up connection object, in the Advanced TCP/IP Settings dialog box, click the General tab, and then clear the Use default gateway on remote network check box.
Q332. - (Topic 2)
You have two portable computers that run Windows 7. The computers are not connected to a network.
The computers are configured as shown in the following table.
You need to transfer a 1-gigabit file from Computer1 to Computer2. What should you do first?
A. On Computer1, create a wireless ad hoc network.
B. On Computer2, configure the Bluetooth File Transfer Wizard to send files.
C. On Computer2, create a network profile to connect to a network named Homegroup.
D. On Computer1, configure the computer to be a member of a workgroup named Homegroup.
Answer: A
Explanation: Wireless Ad Hoc network You can set up a temporary wireless network, or ad hoc network, between two or more computers running Windows 7 (or between computers running Windows 7 and Windows Vista) provided they are all within 30 feet (9 meters) of each other. A WAP is not required to set up an ad hoc network. This enables users to share folders and other resources without needing to connect to an organizational network. On the first computer on the network, you open Network And Sharing Center and click Set Up A New Connection Or Network. You then choose the option Set Up A Wireless Ad Hoc (Computer To Computer) Network. You give the network a name and (if you want) set up a security key so that users joining the network need to supply a password. For WEP, this can be 5 case-sensitive characters, 13 case-sensitive characters, 10 hexadecimal caseinsensitive characters, or 26 hexadecimal case-insensitive characters, depending on security considerations. (If you choose WPA-2 Personal, you can insist on a 64-character password, but by the time everyone has typed it in correctly, the meeting would probably be over.)BluetoothWindows supports Bluetooth version 1.1 and later versions. Windows does not support Bluetooth version 1.0 because that specification lacks several critical updates that Windows requires to support Bluetooth wireless technology well.
Q333. - (Topic 2)
You work as the desktop support technician. The network consists of a single Active Directory domain named CK.com.
You need to perform a clean installation of Microsoft Windows 7 Professional on the workstations in the Research department.
All workstations in the Research department have identical hardware as listed below:
1.2 GHz Dual-Core processor.
1024 MB of RAM.
20 GB hard drive.
DirectX 10 video display card.
Integrated sound card.
10/100 integrated network adapter.
You need to ensure that the workstations able to support Windows 7 and are able to support Windows XP mode.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. You should upgrade the processor.
B. You should upgrade the RAM.
C. You should upgrade the video card.
D. You should upgrade the hard drive.
E. You should upgrade the network adapter.
Answer: B,D
Q334. - (Topic 2)
You have a computer that runs Windows 7.
You need to identify which unsigned drivers have been installed.
Which command should you run?
A. Cipher.exe /s
B. Driverquery.exe /si
C. Msinfo32.exe /q
D. Pnputil.exe –i
Answer: B
Explanation:
Driverquery: Displays a list of all installed device drivers and their properties. /si: Displays digital signature information for both signed and unsigned device drivers.
Up to the minute 70-680 practice exam:
Q335. - (Topic 2)
To establish a DirectAccess connection to the network, what is the first requirement?
A. Install a certificate
B. Create a VPN connection
C. A static IPv4 address
D. A static IPv6 address
Answer: D
Q336. - (Topic 5)
All client computers in your company network have Windows 7 Professional installed. The computers are configured with automatic scheduled Microsoft updates installation.
You receive a support call indicating that after the recently installed update, one of the business applications is unable to start on the computers.
You need to remove the most recent Microsoft update from the computers.
What should you do first?
A. From the Programs and Features, open the Installed Updates window.
B. From the Services console, open the Windows Update service.
C. From the Event Viewer, open the System log.
D. From the Task Scheduler, view the WindowsBackup node.
Answer: C
Q337. - (Topic 1)
You have two computers named Computer1 and Computer2 that run Windows 7.
You need to ensure that you can remotely execute commands on Computer2 from Computer1.
What should you do?
A. Run Winrm quickconfig on Computer1
B. Run Winrm quickconfig on Computer2
C. Enable Windows Remote Management (WinRM) through Windows Firewall on Computer1
D. Enable Windows Remote Management (WinRM) through Windows Firewall on Computer2
Answer: B
Explanation:
Windows Remote Management Service The Windows Remote Management service allows you to execute commands on a remote computer, either from the command prompt using WinRS or from Windows PowerShell. Before you can use WinRS or Windows PowerShell for remote management tasks, it is necessary to configure the target computer using the WinRM command. To configure the target computer, you must run the command WinRM quickconfig from an elevated command prompt. Executing WinRM quickconfig does the following:
-Starts the WinRM service
-Configures the WinRM service startup type to delayed automatic start
-Configures the LocalAccountTokenFilterPolicy to grant administrative rights remotely to local users
-Configures the WinRM listener on http://* to accept WS-Man requests
-Configures the WinRM firewall exception
Q338. - (Topic 2)
Which of the following Windows 7 utilities was used to create the output in the above figure?
Not the real exhibit (exhibit):
German Output (exhibit):
A. MemManager.exe
B. SysPrep.exe
C. Cipher.exe
D. Performance Monitor
Answer: C
see more 70-680 dumps
