High value of ccent ccna icnd1 100 105 pdf exam guide materials and rapidshare for Cisco certification for IT professionals, Real Success Guaranteed with Updated ccent ccna icnd1 100 105 pdf dumps vce Materials. 100% PASS Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) exam Today!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 100-105 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 100-105 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/100-105-exam-dumps.html
Q91. - (Topic 5)
What is the subnet broadcast address of the LAN connected to Router1?
A. 192.168.8.15
B. 192.168.8.31
C. 192.168.8.63
D. 192.168.8.127
Answer: A
Explanation:
The IP address assigned to FA0/1 is 192.168.8.9/29, making 192.168.8.15 the broadcast address.
Q92. - (Topic 3)
Refer to the graphic.
R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem? (Choose two.)
A. All of the routers need to be configured for backbone Area 1.
B. R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3.
C. A static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established.
D. The hello and dead interval timers are not set to the same values on R1 and R3.
E. EIGRP is also configured on these routers with a lower administrative distance.
F. R1 and R3 are configured in different areas.
Answer: D,F
Explanation:
This question is to examine the conditions for OSPF to create neighborhood.
So as to make the two routers become neighbors, each router must be matched with the
following items:
1.
The area ID and its types;
2.
Hello and failure time interval timer;
3.
OSPF Password (Optional);
Q93. - (Topic 1)
Refer to the exhibit.
Which option describes how SwitchA will handle the frame just received?
A. It will drop the frame.
B. It will forward the frame out of port Fa0/3 only.
C. It will flood the frame out all ports.
D. It will flood the frame out of all the ports except Fa0/3.
Answer: D
Q94. - (Topic 7)
Which statement about static routes is true?
A. The source interface can be configured to make routing decisions.
B. A subnet mask is entered for the next-hop address.
C. The subnet mask is 255.255 255.0 by default
D. The exit interface can be specified to indicate where the packets will be routed.
Answer: D
Explanation:
Static routing can be used to define an exit point from a router when no other routes are available or necessary. This is called a default route.
Q95. - (Topic 5)
Refer to the exhibit.
Serial 0/0 does not respond to a ping request from a host on the FastEthernet 0/0 LAN. How can this problem be corrected?
A. Enable the Serial 0/0 interface.
B. Correct the IP address for Serial 0/0.
C. Correct the IP address for FastEthernet 0/0
D. Change the encapsulation type on Serial 0/0
E. Enable autoconfiguration on the Serial 0/0 interface
Answer: A
Explanation:
Serial 0/0 interface is administratively down therefore, you will have to run the "no shutdown" command to enable the interface for data.
Q96. - (Topic 3)
An administrator must assign static IP addresses to the servers in a network. For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address.
Which of the following should be entered into the IP properties box for the sales server?
A. IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway: 192.168.20.9
B. IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.20.1
C. IP address: 192.168.20.30 Subnet Mask: 255.255.255.248 Default Gateway: 192.168.20.25
D. IP address: 192.168.20.30 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.20.17
E. IP address: 192.168.20.30 Subnet Mask: 255.255.255.240 Default Gateway: 192.168.20.25
Answer: C
Explanation:
With network 192.168.20.24/29 we have:
Increment: 8 (/29 = 255.255.255.248 = 11111000 for the last octet)
Network address: 192.168.20.24 (because 24 = 8 * 3)
Broadcast address: 192.168.20.31 (because 31 = 24 + 8 – 1)
Therefore the first usable IP address is 192.168.20.25 (assigned to the router) and the last usable IP address is 192.168.20.30 (assigned to the sales server). The IP address of the router is also the default gateway of the sales server.
Q97. DRAG DROP - (Topic 4)
Drag the definition on the left to the correct term on the right. Not all definitions on the left will be used.
Answer:
Q98. - (Topic 3)
Which IP address is a private address?
A. 12.0.0.1
B. 168.172.19.39
C. 172.20.14.36
D. 172.33.194.30
E. 192.169.42.34
Answer: C
Q99. - (Topic 3)
Which statement describes the process ID that is used to run OSPF on a router?
A. It is globally significant and is used to represent the AS number.
B. It is locally significant and is used to identify an instance of the OSPF database.
C. It is globally significant and is used to identify OSPF stub areas.
D. It is locally significant and must be the same throughout an area.
Answer: B
Explanation:
The Process ID for OSPF on a router is only locally significant and you can use the same number on each router, or each router can have a different number-it just doesn't matter. The numbers you can use are from 1 to 65,535. Don't get this confused with area numbers, which can be from 0 to 4.2 billion.
Q100. - (Topic 3)
Refer to the exhibit.
Why are two OSPF designated routers identified on Core-Router?
A. Core-Router is connected to more than one multi-access network.
B. The router at 208.149.23.130 is a secondary DR in case the primary fails.
C. Two router IDs have the same OSPF priority and are therefore tied for DR election
D. The DR election is still underway and there are two contenders for the role.
Answer: A
Explanation:
OSPF elects one DR per multi-access network. In the exhibit there are two DR so there must have more than one multi-access network.
