Want to know Examcollection 156-315.80 Exam practice test features? Want to lear more about Check-Point Check Point Certified Security Expert - R80 certification experience? Study Certified Check-Point 156-315.80 answers to Abreast of the times 156-315.80 questions at Examcollection. Gat a success with an absolute guarantee to pass Check-Point 156-315.80 (Check Point Certified Security Expert - R80) test on your first attempt.
Free demo questions for Check-Point 156-315.80 Exam Dumps Below:
NEW QUESTION 1
SandBlast appliances can be deployed in the following modes:
- A. using a SPAN port to receive a copy of the traffic only
- B. detect only
- C. inline/prevent or detect
- D. as a Mail Transfer Agent and as part of the traffic flow only
Answer: C
NEW QUESTION 2
With SecureXL enabled, accelerated packets will pass through the following:
- A. Network Interface Card, OSI Network Layer, OS IP Stack, and the Acceleration Device
- B. Network Interface Card, Check Point Firewall Kernal, and the Acceleration Device
- C. Network Interface Card and the Acceleration Device
- D. Network Interface Card, OSI Network Layer, and the Acceleration Device
Answer: C
NEW QUESTION 3
To optimize Rule Base efficiency, the most hit rules should be where?
- A. Removed from the Rule Base.
- B. Towards the middle of the Rule Base.
- C. Towards the top of the Rule Base.
- D. Towards the bottom of the Rule Base.
Answer: C
NEW QUESTION 4
What is the responsibility of SOLR process on R80.10 management server?
- A. Validating all data before it’s written into the database
- B. It generates indexes of data written to the database
- C. Communication between SmartConsole applications and the Security Management Server
- D. Writing all information into the database
Answer: B
NEW QUESTION 5
You are asked to check the status of several user-mode processes on the management server and gateway. Which of the following processes can only be seen on a Management Server?
- A. fwd
- B. fwm
- C. cpd
- D. cpwd
Answer: B
NEW QUESTION 6
Which of the following Windows Security Events will not map a username to an IP address in Identity Awareness?
- A. Kerberos Ticket Renewed
- B. Kerberos Ticket Requested
- C. Account Logon
- D. Kerberos Ticket Timed Out
Answer: D
NEW QUESTION 7
Which of these is an implicit MEP option?
- A. Primary-backup
- B. Source address based
- C. Round robin
- D. Load Sharing
Answer: A
NEW QUESTION 8
Which of the SecureXL templates are enabled by default on Security Gateway?
- A. Accept
- B. Drop
- C. NAT
- D. None
Answer: D
NEW QUESTION 9
Under which file is the proxy arp configuration stored?
- A. $FWDIR/state/proxy_arp.conf on the management server
- B. $FWDIR/conf/local.arp on the management server
- C. $FWDIR/state/_tmp/proxy.arp on the security gateway
- D. $FWDIR/conf/local.arp on the gateway
Answer: D
NEW QUESTION 10
Which GUI client is supported in R80?
- A. SmartProvisioning
- B. SmartView Tracker
- C. SmartView Monitor
- D. SmartLog
Answer: C
NEW QUESTION 11
When a packet arrives at the gateway, the gateway checks it against the rules in the hop Policy Layer, sequentially from top to bottom, and enforces the first rule that matches a packet. Which of the following statements about the order of rule enforcement is true?
- A. If the Action is Accept, the gateway allows the packet to pass through the gateway.
- B. If the Action is Drop, the gateway continues to check rules in the next Policy Layer down.
- C. If the Action is Accept, the gateway continues to check rules in the next Policy Layer down.
- D. If the Action is Drop, the gateway applies the Implicit Clean-up Rule for that Policy Layer.
Answer: C
NEW QUESTION 12
Which of the following commands shows the status of processes?
- A. cpwd_admin -l
- B. cpwd -l
- C. cpwd admin_list
- D. cpwd_admin list
Answer: D
NEW QUESTION 13
Using mgmt_cli, what is the correct syntax to import a host object called Server_1 from the CLI?
- A. mgmt_cli add-host “Server_1” ip_address “10.15.123.10” --format txt
- B. mgmt_cli add host name “Server_1” ip-address “10.15.123.10” --format json
- C. mgmt_cli add object-host “Server_1” ip-address “10.15.123.10” --format json
- D. mgmt._cli add object “Server-1” ip-address “10.15.123.10” --format json
Answer: B
Explanation:
Example:
mgmt_cli add host name "New Host 1" ip-address "192.0.2.1" --format json
• "--format json" is optional. By default the output is presented in plain text. References:
NEW QUESTION 14
What is true of the API server on R80.10?
- A. By default the API-server is activated and does not have hardware requirements.
- B. By default the API-server is not active and should be activated from the WebUI.
- C. By default the API server is active on management and stand-alone servers with 16GB of RAM (or more).
- D. By default, the API server is active on management servers with 4 GB of RAM (or more) and on stand-alone servers with 8GB of RAM (or more).
Answer: D
NEW QUESTION 15
The SmartEvent R80 Web application for real-time event monitoring is called:
- A. SmartView Monitor
- B. SmartEventWeb
- C. There is no Web application for SmartEvent
- D. SmartView
Answer: B
NEW QUESTION 16
There are 4 ways to use the Management API for creating host object with R80 Management API. Which one is NOT correct?
- A. Using Web Services
- B. Using Mgmt_cli tool
- C. Using CLISH
- D. Using SmartConsole GUI console
- E. Events are collected with SmartWorkflow from Trouble Ticket systems
Answer: E
NEW QUESTION 17
How many users can have read/write access in Gaia at one time?
- A. Infinite
- B. One
- C. Three
- D. Two
Answer: B
NEW QUESTION 18
Vanessa is expecting a very important Security Report. The Document should be sent as an attachment via e-m ail. An e-mail with Security_report.pdf file was delivered to her e-mail inbox. When she opened the PDF file, she noticed that the file is basically empty and only few lines of text are in it. The report is missing some graphs, tables and links.
Which component of SandBlast protection is her company using on a Gateway?
- A. SandBlast Threat Emulation
- B. SandBlast Agent
- C. Check Point Protect
- D. SandBlast Threat Extraction
Answer: D
NEW QUESTION 19
Which command is used to display status information for various components?
- A. show all systems
- B. show system messages
- C. sysmess all
- D. show sysenv all
Answer: D
NEW QUESTION 20
What is the most ideal Synchronization Status for Security Management Server High Availability deployment?
- A. Lagging
- B. Synchronized
- C. Never been synchronized
- D. Collision
Answer: B
NEW QUESTION 21
......
P.S. 2passeasy now are offering 100% pass ensure 156-315.80 dumps! All 156-315.80 exam questions have been updated with correct answers: https://www.2passeasy.com/dumps/156-315.80/ (428 New Questions)
