The Regenerate Guide To 1Z0-133 Testing Software

NEW QUESTION 1
Consider a data source whose Inactive Connection Timeout has been set to 60 seconds. You suspect that an application is not returning JDBC connections to this data source. In response, you go to the data source’s Monitoring tab in the Administration Console.
Which of the available columns will confirm your suspicious?

• A. State
• B. Active Connections Current Count
• C. Connection Delay Time
• D. Leaked Connection Count
• E. Current Capacity

Answer: D

NEW QUESTION 2
An administrate in your organization says you do not need to back up the domain files on a machine which only managed servers run.
Select the best explanation for this statement.

• A. This Is true because the domain files can be re-created with the pack and unpack utilities.
• B. This is true (with an exception) because the domain files can be re-created with the pack andunpack utilitie
• C. The exception is if your security realm uses the embedded ldap syste
• D. Which is not included in the JAR file created by the pack utility.
• E. This is true (with an exception) because the domain files can be re-created with the pack and unpack utilitie
• F. The exception is for applications that are deployed to the managed serve
• G. Those files are not included in the JAR file created by the pack utilit
• H. If you back those up manually, then pack and unpack can be used.
• I. This is not tru
• J. You need to back up the domain files on a machine on which only managed servers run by using operating system commands (such as tar or zip).

Answer: A

NEW QUESTION 3
You shut down a managed server by using the administration console. Which statement is always true?

• A. The managed server was running on the same machine as the administration server.
• B. Node Manager is configured properly and running on the managed server’s machine.
• C. You can choose to shut down the server right away or after it completes its work.
• D. The administration console calls WLST to accomplish the shutdow

Answer: C

NEW QUESTION 4
Which session persistence type is invalid?

• A. Async_replicated
• B. async_jdbc
• C. replicated
• D. async_memory
• E. cookie
• F. file
• G. replicated_if_clustered

Answer: D

NEW QUESTION 5
You are creating and configuring a cluster by using the administration console. Which two statements are true?

• A. All servers that will be part of the cluster must be created before the cluster is created.
• B. You must pick the cluster messaging mode.
• C. Even though you create a non dynamic cluster, you can change it to a dynamic cluster later.
• D. Once the cluster is created, you cannot change its messaging mode.
• E. The administration console does not provide a way to manually migrate singleton service
• F. It must be set up to be done automatically or by using WLST.

Answer: BC

NEW QUESTION 6
Consider a domain that includes a dynamic cluster of three servers. Your network administrator requires all servers to bind the specific domain name mycompany.com.
Which Administration console action implements this requirement?

• A. Use a $(macro)in the server templates listen address.
• B. Assign each dynamic server a separate machine.
• C. Create multiple server templates for the cluster.
• D. Update the cluster’s listen address prefi

Answer: A

NEW QUESTION 7
You create a new Work Manager to control how server threads are allocated to an application’s
increasing requests . You want to further configure the criteria of the Work manager by using a Request class.
Identify three valid Request classes that you can to a work manager.

• A. Uniform Distribution Request class
• B. Response Time request class
• C. Max Throughput Request class
• D. Fair share Request class
• E. Context Request class

Answer: BDE

NEW QUESTION 8
You are using WebLogic Server Diagnostic Framework (WLDF) Instrumentation in a system diagnostic module. The Dye Injection monitor is enabled. You know the diagnostic context ID of the request you are Interested in that was processed by several. You are looking through the messages in the server
log file of several. Which statement is true?

• A. You need to look at the Events Data Archiv
• B. Server log files do not contain WL DF context IDs
• C. You need to look at the Harvested Data Archiv
• D. Server log files do not contain WL DF context IDs.
• E. You need to look at the domain log fil
• F. Only the domain log file contains WL DF context IDs.
• G. You can search the server log file for the context I
• H. Any message that was written to the log IDs during that request will contain the context ID.
• I. You need to translate the context ID Into the corresponding transaction ID, which is the only ID in server log file entries.

Answer: A

NEW QUESTION 9
You are carrying out the RDBMS Security Store configuration using the configuration Wizard Which three actions can you perform with the Configuration Wizard during the process?

• A. Create tables in the data store.
• B. Execute SQL scripts in WebLogic server’s server /1ib directory.
• C. Populate the database tables with external LDAP users.
• D. Test the connection to a back –end database.
• E. Allocate tablespace for the data stor

Answer: ACD

NEW QUESTION 10
The Administration Server of a domain falls due to a hardware failure. The hardware is beyond repair. Before the failure you prepared a “backup admin server”. You go through your planned recovery process and are successful. The Administration Server is now running on different hardware. The managed servers of the domain automatically reconnect to the admin server.
Select the two statements that are true.

• A. Files of deployed applications are available to the backup admin server from the same relative location as they were to the original admin server.
• B. At the time of the failure ,the backup admin server was running in “Standby” mode on different hardware in the same network.
• C. When the admin server failed, you must have shut down and restarted the managed servers, otherwise they could not have reconnected to the failed admin server.
• D. The backup admin server is any one of the running managed server
• E. You select one of themanaged servers, stop it, set its “administration” flag, and restart it as the admin server of the domain.
• F. The backup admin server must be running at the same DNS name or IP address as the origina

Answer: BE

NEW QUESTION 11
During a performance test, a server’s log includes several out of memory error messages. You are using the Administration console.
How can you verify the amount of available heap in the server?

• A. Click the server ‘s Debug > Heap tab.
• B. Click the server’s Debug >Health tab.
• C. Click the server’s Monitoring >Health tab.
• D. Click the server’s Monitoring > Threads tab.
• E. Click the server ‘s Monitoring >performance ta

Answer: E

NEW QUESTION 12
You decide to use a database to store WebLogic Server transaction logs for a managed server. Which two steps are required to configure this?

• A. Under the managed server's Services configuration select “JDBC” as the type for the transaction log store.
• B. Under the managed server's Services configuration, select "Disable the Default Store
• C. Create a non XA data source in the domain for the database transaction log.
• D. Create an XA data source in the domain for the database transaction lo

Answer: AC

NEW QUESTION 13
In memory replication in your cluster seems to be slow. You decide to create a replication channel for your cluster. Which two statements are true? (Choose two.)

• A. The channel is used for heartbeats so they do not interfere with replication communication
• B. Each server in the cluster must have this named replication channel configured on it
• C. If no replication channel is configured, then sessions are persisted to the file system or the database
• D. The channel can be used for stateful session bean replication
• E. The channel cannot use a secure protocol

Answer: BD

NEW QUESTION 14
Identify two advantages of using a Single Client Access Name (SCAN) when configuring a GridLink data source. (Choose two.)

• A. The Fast Connection Failover (FCF) pattern, which allows rapid failure detection, is enabled
• B. The more sophisticated runtime connection load balancing (RLCB) is used; without SCAN, load balancing reverts to a simple round-robin scheme
• C. SCAN is required for the GridLink data source to use an XA driver
• D. The database URL is shorter because it contains one SCAN alias and port as opposed to a host and port foe each RAC node
• E. The data source configuration does not need to be updated when new nodes are added to the RAC cluster

Answer: AE

NEW QUESTION 15
Which three statements are true about the administration console?

• A. The administration console can be disabled.
• B. The context path of the administration console may be changed.
• C. If a domain is in Development Mode the administration console no longer requires an administration –level user when logging in.
• D. If a domain is in production Mode, access to the administration console must be made through a secure port.
• E. If the domain’s Administration port is enabled, access to the administration console must be made only through that port.

Answer: ABE

NEW QUESTION 16
You are running WebLogic Server under a 64-bit HotSpot JVM.
You edit your domain’s setDomainEnc.sh script to update the minimum and maximum heap sizes as follows:
USER_MEM_ARGS=”-Xms32meg –Xmx150meg” Export USER_MEM_ARGS
You try to start a managed server by running the domain start script at the command line.
The server fails with the message:
Invalid initial heap size: -Xms32meg
Why does the server fail with that message?

• A. The minimum heap size for a 64-bit JVM is 64 Megabytes
• B. For performance reasons, the minimum heap size and maximum heap size should be the same value
• C. The parameter value was entered incorrectl
• D. The correct value is: “-Xms32m –Xmx150m”
• E. The parameter value was entered incorrectl
• F. You must enter memory parameter values in Kilobytes
• G. The parameter value was entered incorrectl
• H. The correct value is: “-Xms:32meg – Xmx:150meg”

Answer: C

NEW QUESTION 17
Which two statements are characteristics of the Reconfiguration Wizard? (Choose two.)

• A. You can upgrade any domain that was created using WLS 9.2 and above
• B. The Reconfiguration Wizard allows you to change the domain mode
• C. The Reconfiguration Wizard allows you to select a different Java JDK
• D. The Reconfiguration Wizard does not allow the reconfiguration of JDBC data sources
• E. You can upgrade only a domain which is running WLS 10.3.x or later

Answer: DE

NEW QUESTION 18
Each domain has a directory called servers that contains subdirectories for each server in the domain. Your domain has a managed server managed managed1.
When will the managed1 directory be created?

• A. When the managed1 server is defined in the Configuration WIZARD
• B. When the domain is created
• C. When the Administration server comes up for the first time
• D. When the managed1 server comes up for the first time

Answer: D

NEW QUESTION 19
......