Secrets to solaris 10 cx-310-200

The actual Cisco 200-310 questions and answers tend to be updated through our own technical engineers in real time. You will get the most recent simulated examination questions that are in step with the existing Cisco test. A lot more importantly, the actual revise day prolonged in order to One hundred and eighty nights, showing you will probably have fifty percent any years time and energy to study 200-310 puts.

2016 Jul micro se 310-200:

Q61. A circuit order has been placed for Gigabit Ethernet and is 80KM from the carrier equipment. What type of SFP will be required? 

A. TX 

B. SX 

C. ZX 

D. LX 

Answer: C 


Q62. DRAG DROP 


Answer: 



Q63. What is the benefit of VLSM? 

A. reduces configuration complexity by using the same subnet mask length 

B. reduces the routing table size by using automatic route summarization 

C. reduces the routing table size by using manual route summarization 

D. allows the subnet mask and classful routing updates to be advertised 

E. secures the hosts on a subnet by using RFC 1918 addresses 

Answer: C 


Q64. Which IPv6 feature enables routing to distribute connection requests to the nearest content server? 

A. Link-local 

B. Site-local 

C. Anycast 

D. Multicast 

E. Global aggregatable 

Answer: C 

Explanation: Any cast is a network addressing and routing methodology in which data grams from a single sender are routed to the topologically nearest node in a group of potential receivers all identified by the same destination address. Link: http://en.wikipedia.org/wiki/Anycast 


Q65. Where in the Cisco Enterprise Architecture model does network management reside? 

A. Enterprise data center module 

B. Enterprise campus module 

C. Enterprise edge module 

D. Service Provider edge module 

E. Service Provider data center module 

Answer: B 

Explanation: 


The network management servers reside in the campus infrastructure but have tie-ins to all the components in the enterprise network for monitoring and management. 


200-310 brain dumps

Most up-to-date bk-200 bg-310:

Q66. A dynamically routed private line and a statically routed IPsec tunnel connect two offices. What routing configuration prefers the IPsec tunnel only in the event of a private line failure? 

A. floating static entry 

B. EIGRP variance 

C. bandwidth metric 

D. OSPF maximum paths 

Answer: A 


Q67. What is the most compact representation of the following IPv6 address? 

2001:db8:0000:0000:cafe:0000:0000:1234 

A. 2001:db8::cafe::1234 

B. 2001:db8::cafe:0000:0000:1234 

C. 2001:db8:0:0:cafe::1234 

D. 2001:db8::cafe:0:1234 

Answer: C 


Q68. Which HSRP parameters must match, to ensure proper functionality? 

A. group parameters 

B. priority parameters 

C. preempt parameters 

D. tracking parameters 

Answer: A 


Q69. With deterministic Wireless LAN Controller redundancy design, the different options available to the designer have their own strengths. Which one of these statements is an example of such a strength? 

A. Dynamic load balancing, or salt-and-pepper access point design, avoids the potential impact of oversubscription on aggregate network performance. 

B. N+N redundancy configuration allows logically grouping access points on controllers to minimize intercontroller roaming events. 

C. N+N+1 redundancy configuration has the least impact to system management because all of the controllers are colocated in an NOC or data center. 

D. N+1 redundancy configuration uses Layer 3 intercontroller roaming, maintaining traffic on the same subnet for more efficiency. 

Answer: B 

Explanation: With such an arrangement there is no complex mesh of access points & controllers. Link: http://www.cisco.com/web/learning/le31/le46/cln/qlm/CCDA/design/understanding-wireless-network-controller-technology-3/player.html 

N+N WLC Redundancy With N+N redundancy, shown in Figure 5-14. an equal number of controllers hack up each other. For example, a pair of WLCs on one floor serves as a backup to a second pair on another floor. The top WLC is primary for API and AP2 and secondary for AP3 and AP4. The bottom WLC is primary for AP3 and AP4 and secondary for API and AP2. There should be enough capacity on each controller to manage a failover situation. 


N+N+1 WLC Redundancy 

With N+N+1 redundancy, shown in Figure 5-15, an equal number of controllers back up each other (as with N+N), plus a backup WLC is configured as the tertiary WLC for the APs. N+N+1 redundancy functions the same as N+N redundancy plus a tertiary controller that backs up the secondary controllers. The tertiary WLC is placed in the data center or network operations center 



Q70. A network engineer is using the Cisco enterprise architecture model. In what module do network management servers reside? 

A. Enterprise Campus 

B. Enterprise Edge 

C. Remote Modules 

D. SP Edge WAN/internet 

Answer: A 



see more 200-310 dumps