Updated 2V0-41.19 Practice Exam 2021

NEW QUESTION 1
Which two commands are used to query the arp-table of a logical switch? (Choose two.)

• A. get logical-switch arp-table <logical-switch-uuid>
• B. get logical-switch <logical-switch-uuid> arp-table
• C. get logical-switch <vni> arp-table
• D. get logical-switch arp-table <vni>
• E. get logical-switch arp-table

Answer: BC

NEW QUESTION 2
What is VMware's recommendation for the minimum MTU requirements when planning a NSX-T Data Center deployment?

• A. MTU should be set to 1550 or less across the data center network including inter-data center connections.
• B. MTU should be set to 1500 or less only on inter-data center connections.
• C. Configure Path MTU Discovery and rely on fragmentation.
• D. MTU should be set to 1600 or greater across the data center network including inter-data center connections.

Answer: D

NEW QUESTION 3
What are the supported N-VDS modes?

• A. DPDK Datapath
• B. Enhanced Datapath
• C. Overlay Datapath
• D. Standard Datapath
• E. Secure Datapath

Answer: BD

NEW QUESTION 4
Which three steps must be taken to assign a new IP address to a member of a NSX Management Cluster that was deployed manually? (Choose three.)

• A. Delete NSX Manager VM
• B. Change IP address of NSX Manager in vApp Properties
• C. Execute detach node <node-id> from the NSX Manager CLI
• D. Deploy new NSX Manager VM
• E. Delete NSX Management cluster member from NSX Simplified UI

Answer: ABC

NEW QUESTION 5
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.) I

• A. stateful services leveraged
• B. increased north/south bandwidth
• C. traffic load balancing
• D. Failover of services
• E. traffic predictability

Answer: BC

NEW QUESTION 6
Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)

• A. Destination MAC
• B. Failover Order
• C. Load Balanced Source
• D. Load Balanced Source IP
• E. Destination Port
• F. Load Balanced Source MAC

Answer: BCF

NEW QUESTION 7
Which port is used by a transport node to communicate with NSX Manager in NSX-T Data Center 2.4?

• A. 5671
• B. 1234
• C. 1235
• D. 5678

Answer: A

NEW QUESTION 8
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?

• A. virsh start <NSX-Manager-Name>
• B. virsh poweron <nsx-manager-name>
• C. virsh poweron <nsx-manager-ID>
• D. virsh start <NSX-Manager-ID>

Answer: A

NEW QUESTION 9
Which visual tool within the NSX User Interface should an administrator use to monitor hop-by-hop connectivity between two virtual machines or logical ports?

• A. IPFIX
• B. Port Connection
• C. Port Mirroring
• D. Port Status

Answer: B

NEW QUESTION 10
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center. What is the minimum MTU size for the UPLINK profile?

• A. 1600
• B. 1650
• C. 1550
• D. 1500

Answer: A

NEW QUESTION 11
What is required to configure a load balancer in inline mode?

• A. DNAT
• B. SNAT
• C. Client and server connected to different Tier-1 Gateways
• D. Client and server running on different transport nodes

Answer: C

NEW QUESTION 12
A company is planning to implement NSX-T Data Center and will be using load balancing for 50 unique production workloads.
Which is the minimum NSX-T Edge size configuration required to support the production load balancer?

• A. Large (8 vCPU 16GB RAM)
• B. Medium (4 vCPU 8GB RAM)
• C. Extra Large (12 vCPU 24GB RAM)
• D. Small (2 vCPU 4GB RAM)

Answer: B

NEW QUESTION 13
Which three functions require a Services Router (SR) component on an Edge node? (Choose three.)

• A. Distributed Firewall
• B. Service Insertion
• C. Gateway Firewall
• D. Virtual Private Network
• E. Distributed Routing
• F. Packet Forwarding

Answer: CEF

NEW QUESTION 14
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?

• A. 3
• B. 5
• C. 4
• D. 6

Answer: C

NEW QUESTION 15
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX Manager Simplified UI shows the mapping between the virtual NIC and the host's physical adapter?

• A. N-VDS Visualization
• B. Activity Monitoring
• C. IPFIX
• D. Port Mirroring

Answer: A

NEW QUESTION 16
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?

• A. get host-switch <Host-Switch-Name> tunnels
• B. get host-switch <Host-Switch-Name> tunnel status
• C. get transport-node tunnel state
• D. get transport-node tunnel status

Answer: A

NEW QUESTION 17
Which two commands could be used on an ESXI transport node to validate connectivity to the NSX Manager? (Choose two.)

• A. nsxcli --cmd get manager status
• B. esxcli network ip connection list I grep rabbitmq
• C. nsxcli --cmd get managers
• D. nsxcli --cmd get manager connectivity status
• E. esxcli network ip connection list I grep 5671

Answer: BE

NEW QUESTION 18

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

• A. Reverse NAT
• B. SNAT
• C. 1:1 NAT
• D. DNAT

Answer: D

NEW QUESTION 19
An NSX administrator has observed connectivity issues between the NSX Manager and the KVM Transport Node.
Which two log files could be used to troubleshoot the issue on the KVM Transport Node? (Choose two.)

• A. /var/log/vmware/nsx-syslog
• B. /usr/vmware/log/syslog
• C. /var/log/nsx/syslog
• D. /usr/vmware/nsx-syslog
• E. /var/log/syslog

Answer: AE

NEW QUESTION 20
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

• A. Group
• B. Tier-1 Gateway
• C. Segment Port
• D. Segment
• E. DFW

Answer: AE

NEW QUESTION 21
What are three NSX Manager roles? (Choose three.)

• A. zookeeper
• B. manager
• C. policy
• D. controller
• E. cloud
• F. master

Answer: BCD

NEW QUESTION 22
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)

• A. Port NAT
• B. Source NAT
• C. Destination NAT
• D. 1:1 NAT
• E. Reflexive NAT

Answer: BC

NEW QUESTION 23
......