Renew 2V0-41.20 Free Practice Questions For Professional VMware NSX-T Data Center Certification

NEW QUESTION 1
Which log is used to see a failed NSX-T installation of a VIB package on ESXi transport nodes?

• A. /var/l og/host
• B. log
• C. /var/log/vmware/eam/eam.log
• D. /var/log/esxupdate.log
• E. /var/log/syslog.log

Answer: D

NEW QUESTION 2
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?

• A. virsh start <NSX-Manager-ID>
• B. virsh poweron <nsx-manager-ID>
• C. virsh start <NSX-Manager-Name>
• D. virsh poweron <nsx-manager-name>

Answer: C

NEW QUESTION 3
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?

• A. Manually create a gateway interface and mark it as transit.
• B. Automatically created when DR is created.
• C. Automatically created when SR is initialized.
• D. Manually create external uplink interface and mark it as transit.

Answer: C

NEW QUESTION 4
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

• A. get support-bundle file vcpnv.tgz
• B. set support-bundle file vcpnv.tgz
• C. vm-support
• D. esxcli system syslog config logger set --id=nsxmanager

Answer: A

Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264

NEW QUESTION 5
Which CLI command shows syslog on NSX Manager?

• A. show log manager follow
• B. get log-file auth.log
• C. get log-file syslog
• D. /var/log/sysloq/syslog.log

Answer: C

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E

NEW QUESTION 6
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

• A. virsh dumpxml <VM Name> | grep interfaceid
• B. virsh get-interface <VM Name>
• C. virsh show <VM Name> | grep interfaceid
• D. virsh list-interface <VM Name>

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION 7
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?

• A. ifconfig
• B. tcpdump
• C. debug
• D. ipconfig

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184

NEW QUESTION 8
Where are Distributed Firewall logs containing access decisions stored?

• A. NSX API
• B. NSX Edge
• C. NSX Manager
• D. Hypervisor transport node

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6 https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A

NEW QUESTION 9
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)

• A. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
• B. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
• C. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
• D. The virtual machines running on the KVM Transport Node are not connected to the VDS.
• E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.

Answer: BE

NEW QUESTION 10
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?

• A. openvswitch
• B. etherswitch
• C. nsx-vswitch
• D. dyswitch

Answer: A

NEW QUESTION 11
Which two statements are true for a Tier-1 Gateway? (Choose two.)

• A. owned and configured by the Tenant
• B. connects to physical networks
• C. owned and configured by Service Provider
• D. always configured in active-standby mode
• E. supports ECMP

Answer: BD

NEW QUESTION 12
Which two logical router components span across all transport nodes? (Choose two.)

• A. DISTRIBUTED_ROUTER_TIER0
• B. SERVICE_ROUTER_TIER0
• C. TIER0_DISTRIBUTED_ROUTER
• D. DISTRIBUTED_ROUTER_TIER1
• E. SERVICE_ROUTER_TIER1

Answer: AD

NEW QUESTION 13
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)

• A. 5685
• B. 1235
• C. 5671
• D. 5678
• E. 1234

Answer: BE

Explanation:
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual

NEW QUESTION 14
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• A. Automatically created when Tier-1 is created.
• B. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
• C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
• D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-B

NEW QUESTION 15
The NSX Control Plane is responsible for which two functions? (Choose two.)

• A. receive and validate configuration from NSX Policy
• B. host API services
• C. propagate topology information
• D. push stateless configurations to forwarding engines
• E. maintain packet-level statistics

Answer: CD

NEW QUESTION 16
Which three services are compatible with VRF Lite? (Choose three.)

• A. VPN
• B. Intrusion Detection
• C. NAT
• D. Load Balancer
• E. DHCP

Answer: BCE

Explanation:
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual.

NEW QUESTION 17
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?

• A. SR and DR doesn’t need to be connected to provide any stateful services.
• B. DR is instantiated and automatically connected with SR.
• C. SR is instantiated and automatically connected with DR.
• D. SR and DR is instantiated but requires manual connection.

Answer: C

NEW QUESTION 18
Which three can an administrator define in a transport node profile? (Choose three.)

• A. Logical Router
• B. Segment Profile
• C. Segment
• D. Uplink Profile
• E. VDS switch configuration
• F. N-VDS switch configuration

Answer: DEF

NEW QUESTION 19
Which two choices are solutions of the NSX portfolio (Choose two.)?

• A. vRealize Automation
• B. NSX Distributed IDS/IPS
• C. vRealize Network Insight
• D. Tanzu Kubernetes Grid
• E. NSX Service Mesh

Answer: BE

NEW QUESTION 20
Which two choices are use cases for Distributed Intrusion Detection? (Choose two.)

• A. Identify security vulnerabilities in the workloads.
• B. Use agentless antivirus with Guest Introspection.
• C. Quarantine workloads based on vulnerabilities.
• D. Identify risk and reputation of accessed websites.
• E. Gain insight about micro-segmentation traffic flows.

Answer: AC

NEW QUESTION 21
Which to steps must an NSX administrator take to integrate VMware Identity Manager in NSX-T to support role-based access control? (Choose two.)

• A. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
• B. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
• C. Create an OAuth 2.0 client in VMware Identity Manager.
• D. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
• E. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.

Answer: CE

NEW QUESTION 22
Which tool could be used to configure BGP on a Tier-0 Gateway?

• A. PowerShell
• B. API
• C. ESX CLI
• D. NSX CLI

Answer: D

NEW QUESTION 23
An administrator has a requirement to have consistent policy configuration and enforcement across NSXT instances. What feature of NSX-T Data Center fulfills this requirement?

• A. Load balancer
• B. Policy-driven configuration
• C. Multi-hypervisor support
• D. Federation

Answer: B

NEW QUESTION 24
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?

• A. Wireshark
• B. pktcap-uw
• C. net-stats
• D. tcpdump

Answer: B

Explanation:
If you do when troubleshooting connectivity issues on your Virtualization environment. This post will help you to capture Network traffic on ESXi host using pktcap-uw tool.

NEW QUESTION 25
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

• A. SYSTEM
• B. FABRIC
• C. GROUPING
• D. MONITORING

Answer: B

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION 26
......