Actual 300-080 Exam Questions 2021

Our pass rate is high to 98.9% and the similarity percentage between our 300-080 Free Practice Questions and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300-080 exam in just one try? I am currently studying for the 300-080 Dumps. Latest 300-080 Dumps, Try Cisco 300-080 Brain Dumps First.

Check 300-080 free dumps before getting the full version:

NEW QUESTION 1
Cisco Unified Communications Manager is configured to collect H.245 and H 225 traces through the Cisco Serviceability web interface. What do you use to download and view the trace files?

  • A. Cisco Unified OS Administration
  • B. Cisco Unified Serviceability
  • C. Bulk Administration > upload/DownloaDFiles
  • D. Cisco Unified Real-Time monitoring Tool

Answer: D

NEW QUESTION 2
While you deploy SAF CCD in a remote location, you are unable to enable the SAF CCD service on an Cisco IOS-based device. Which action can you take to troubleshoot the problem?

  • A. Verify that Cisco Unity Express is operational.
  • B. Verify that IOS Release 15.0(1)M is installed.
  • C. Verify that DSP Farm resources are configured on the device.
  • D. Verify that the device has sufficient RAM to run SAF CCD.
  • E. Verify the integrity of the flash installation.

Answer: A

NEW QUESTION 3
You have configured a new MGCP gateway on your Cisco Unified Communications Manager servers but the endpoints are shown with status "None”.
What are two possible solutions for this registration issue? (Choose two)

  • A. Configure the voice-VLAN interface of the MGCP gateway with mgcp-gateway voip interface command to set the source IP address of the MGCP packets correctly.
  • B. Ensure that you have configured the mgcp call-agent command with the Cisco Unified Communications Manager server address or hostname.
  • C. Enable the endpoint voice interface for backhauling in interface configuration mode with the isdn bind-l3 ccm-manager command
  • D. Ensure that you have configured the ccm-manager call-agent command with the correct Cisco Unified Communications Manager server address or hostname.
  • E. Activate the MGCP Feature service on all call-processing servers in the cluster.

Answer: BD

NEW QUESTION 4
What is the maximum number of characters that you can use in Service Advertisement Framework (SAF) forwarder name?

  • A. 10
  • B. 20
  • C. 30
  • D. 40
  • E. 50
  • F. 60

Answer: E

NEW QUESTION 5
Which meaning does the universal keyword have in this dspfarm profile configuration?
300-080 dumps exhibit

  • A. The profile allocates DSP resources in flexible mode.
  • B. The profile allows transcoding between any configured codecs.
  • C. The profile can be used not only as transcoder but also as MTP.
  • D. No special meaning, this is the default setting.

Answer: B

NEW QUESTION 6
A user reports that video quality is good when video is available, but there are constant interruptions to video. Which possible cause of this issue is true?

  • A. The bandwidth is too high
  • B. A satellite connection joins the meeting
  • C. The codeCExperiences packet loss
  • D. The multiplexor negotiation timeout occurs

Answer: D

NEW QUESTION 7
Which command is used on an IOS Router that is acting as a SAF Forwarder to confirm its registration status with a SAF Client?

  • A. show ip asf-forwarder status details
  • B. show ospf neighbor details
  • C. show ip interface details
  • D. show cdp neighbor details
  • E. show eigrp service-family ipv4 clients details
  • F. show service-family asf-forwarder details

Answer: E

NEW QUESTION 8
An end user at a remote site is trying to initiate an Ad Hoc conference call to an end user at the main site. The conference bridge is configured to support G.711. Remote user's phone only supports G.729. The remote end user receives an error message on the phone: "Cannot Complete Conference Call." What is one cause of the issue?

  • A. The remote phone does not have the conference feature assigned.
  • B. A software conference bridge is not assigned.
  • C. A Media Termination Point is missing.
  • D. The transcoder resource is missing.

Answer: D

NEW QUESTION 9
Which alarm string purges all learned patterns from the Cisco Unified Communications Manager?

  • A. DuplicateLearnedPattern
  • B. SAFForwarderError
  • C. CCDIPReachableTimeOUT
  • D. CCDPSTNFailOverDurationTimeOUT
  • E. CCDLearnedPatternLimitReached

Answer: E

NEW QUESTION 10
You are integrating a new video endpoint with Cisco VCS, but you find that the unit is failing to register. You assign extension 4000 to the device in the "vc.cisco.com" SIP domain, and you set its registration proxy to the IP address of 10.1.1.10 as the Cisco VCS. In order for the device to register via SIP, which format must you use when you set the SIP address of the device?

  • A. 4000@vc.cisco.com
  • B. 4000
  • C. 4000@10.1.110
  • D. 4000@cisco

Answer: A

NEW QUESTION 11
Which two issues can cause a Cisco Unified Communications Manager to fail to register with its Cisco SAF Forwarder? (Choose two.)

  • A. An H.323 SAF trunk was configured instead of a SIP SAF trunk.
  • B. No directory number patterns were configured on the Cisco Unified Communications Manager.
  • C. CCD advertising service was not activated.
  • D. Incorrect user credentials were used on the SAF Forwarder.
  • E. CCD requesting service was not activated.

Answer: DE

NEW QUESTION 12
In a Cisco Unified Communications Manager call trace, which string indicates an intrasite call?

  • A. OutsideDialtone = [1]
  • B. cmDeviceType=[AccessDevice]
  • C. OutsideDialtone= [0]
  • D. OutsideDialtone-[2]

Answer: A

NEW QUESTION 13
When user attempted to call a Colleague at the same site, the caller received a recording that the call could not be completed as dialed. Which two actions can you take to troubleshoot the problem? (Choose two.)

  • A. Reboot the IP phone that the user attempted to call.
  • B. Verity that the partition and calling search space are correct.
  • C. Reboot the user's IP phone.
  • D. Reboot the Cisco Unified communications Manager Cluster.
  • E. Ping the remote gateway to verify connectivity.
  • F. Use RTMT to trace the call from DN to DN.

Answer: BE

NEW QUESTION 14
Refer to the exhibit.
300-080 dumps exhibit
An engineer is troubleshooting a video audio issue where the video endpoint logs are showing this error message. Which two actions must the engineer take to fix the issue? (Choose two.)

  • A. Assign the transcoder to the MRGL, which is in turn assigned to the MRG; apply the MRG to the endpoint device pool of the video.
  • B. Assign the transcoder to the MRG, which is in turn assigned to the MRGL; apply the MRGL directly to the endpoint of the video.
  • C. Assign the transcoder to the MRGL, which is in turn assigned to the MRG; apply the MRG directly to the endpoint of the video.
  • D. Assign the transcoder to the MRG, which is in turn assigned to the MRGL; apply the MRGL to the video’s endpoint device pool.
  • E. Assign the transcoder directly to the endpoint of the video.

Answer: AE

NEW QUESTION 15
Two phones in the same cluster and at the same site have a Call currently connected. The site local H.323 PSTN gateway loses connection with Cisco Unified Communications Manager. Which two results do you expect? (Choose two.)

  • A. SRST is active, and all the phones enter SRST mode.
  • B. No incoming and outgoing calls are possible.
  • C. Cisco Unified SRST is able to receive incoming calls.
  • D. The current call is not disconnected.
  • E. The phones display "CM Fallback Service Operating."

Answer: BD

NEW QUESTION 16
As a Voice Administrator, you have configured the Service Advertisement Call Control Discovery (CCD) feature. When you encounter CCD issues, which command would you use on the IOS interface to check all the learned routes on the IOS device?

  • A. show eigrp service-family ipv4 topology
  • B. show voice safdndb all
  • C. show ccm-manager
  • D. show eigrp service-family ipv4 interfaces
  • E. show voice saf client
  • F. show voice saf dial-peer outbound

Answer: B

NEW QUESTION 17
Refer to the exhibit.
300-080 dumps exhibit
Assuming that the two Cisco SAF Forwarders are adjacent to each other and that no SAF clients have been configured, which statement is true?

  • A. The Cisco SAF Forwarders will not establish a neighbor relationship because the service-family external-client configuration is missing.
  • B. The Cisco SAF Forwarders will not establish a neighbor relationship because the eigrp label CUCME should be replaced with SAF.
  • C. The Cisco SAF Forwarders will not establish a neighbor relationship because the service-family external-client configuration is missing as well as the static neighbor configurations.
  • D. The Cisco SAF Forwarders will establish a neighbor relationshi
  • E. No further configuration is required.
  • F. Cisco SAF Forwarders will not establish a neighbor relationship until the SAF clients are configured and registered to the Cisco SAF Forwarders.

Answer: D

P.S. Easily pass 300-080 Exam with 219 Q&As Surepassexam Dumps & pdf Version, Welcome to Download the Newest Surepassexam 300-080 Dumps: https://www.surepassexam.com/300-080-exam-dumps.html (219 New Questions)