Certified 300-080 Dumps 2021

Cause all that matters here is passing exam with 300-080 Free Practice Questions. Cause all that you need is a high score of 300-080 Free Practice Questions. The only one thing you need to do is downloading 300-080 Exam Questions and Answers free now. We will not let you down with our money-back guarantee.

Also have 300-080 free dumps questions for you:

NEW QUESTION 1
Refer to the exhibit.
300-080 dumps exhibit
Media Termination Point is required when the H.264 codec-capable video endpoints route calls via a specific Cisco Unified Communications Manager SIP trunk, in order to provide DTMF interworking capabilities. In the exhibit, a designated IOS Software MTP is configured. However, calls establish as audio only when using this particular MTP. Which codec is missing from this IOS MTP configuration?

  • A. codec pass-through
  • B. codec h264 cif
  • C. codec h263 cif
  • D. codec h264 720p

Answer: A

NEW QUESTION 2
An Extension Mobility user successfully logs in to an Extension Mobility (Hoteling) phone, but now the user cannot log in to an addition^ Extension Mobility (Hoteling)) phone. Why is the user unable to log in to the nest phone?

  • A. The user is set for autologout for Extension Mobility.
  • B. The user is set to a maximum of one login.
  • C. The user does not have login privileges for the new phone
  • D. The user does not have permission to use Extension Mobility
  • E. The first phone does not have a logout button, due to an incorrect phone button template.
  • F. The user is not set to allow multiple logins.

Answer: B

NEW QUESTION 3
When a Caller dials 9 plus an external seven-digit number, the caller hears a fast-busy tone after a period of silence. What is causing the silence?

  • A. There is no dial route for 9XXXXXXX on Cisco Unified Communications Manager.
  • B. The gateway is not dropping the leading 9, and the PSTN fails.
  • C. The T302 timer is waiting to expire.
  • D. The caller does not have the PSTN partition in the CSS.
  • E. The caller dialed the wrong number.
  • F. To dial successfully, the caller must enter a Forced Authorization Code.

Answer: C

NEW QUESTION 4
The CLI command utils dbreplication reset all was run on a Cisco Unified Communications Manager However, replication failed to restart Which course of action should be taken to resolve this issue?

  • A. Issue the CLI command utils dbreplication clusterreset.
  • B. Issue the CLI command utils dbreplication reset.
  • C. Restart the replication from the Cisco Unified communications Manager RTMT tool
  • D. Issue the CLI command utils dbreplication runtimestate.
  • E. Issue the CLI command utils dbreplication clusterreset all.

Answer: C

NEW QUESTION 5
Refer to the exhibit.
300-080 dumps exhibit
After migrating a Cisco IP phone to a new cluster, the phone continues to register with its old Cisco Unified Communications Manager cluster. The Cisco IP phone status message indicates the error that is shown. What is a possible cause for this error condition?

  • A. The phone cannot reach its new TFTP server.
  • B. The phone is not provisioned correctly on the destination cluster.
  • C. The new TFTP server is not in the ITL file.
  • D. Cisco CallManager services are not running on the destination cluster.

Answer: C

NEW QUESTION 6
Refer to the exhibit.
300-080 dumps exhibit
Which Cisco Unified Communications Manager trace file level should be selected when enabling traces to send to Cisco TAC for analysis?

  • A. State Transition
  • B. Arbitrary
  • C. Significant
  • D. Error
  • E. Detailed
  • F. Special

Answer: E

NEW QUESTION 7
Which three items are displayed on the endpoint registration verification page in Cisco VCS? (Choose three.)

  • A. E.164 address
  • B. endpoint name
  • C. endpoint MAC address
  • D. endpoint registration status
  • E. device description
  • F. device type
  • G. device pool

Answer: ABF

NEW QUESTION 8
You have been presented with a trouble ticket from an end user who works at a remote location that is served by a Cisco Unified Communications Manager Express. The user reports being unable to place calls to international numbers, but all other calls work properly and other users at this location can place international calls. Which two troubleshooting techniques would be helpful in resolving this issue? (Choose two.)

  • A. Cisco IOS debug tools
  • B. Class of Restriction baseline configuration for the user on Cisco Unified Communications Manager Express
  • C. show output of the ephone anDEphone-dn configurations
  • D. show output of the voice translation rules in the voice gateway
  • E. show output for the T1 controller and voice port configuration in the voice gateway

Answer: AB

NEW QUESTION 9
You are configuring the Call Control Discovery feature. You need to configure Hosted DN Group Configuration settings. What is the range of values that you can define in the PSTN Failover Strip Digits field?

  • A. 0-10
  • B. 0-12
  • C. 0-14
  • D. 0-16
  • E. 0-18
  • F. 0-20

Answer: D

NEW QUESTION 10
After you deploy a hardware transcoder, users without a Common codec are unable to complete cafe to one another. Which two actions must you take (Choose two.)

  • A. Use RTMT to verify mat transcoder resources are available
  • B. verify that all SIP trunks are registered within Cisco Unified Communications Manager
  • C. verify that media resources are assigned to the transcoder
  • D. verify that the transcoder registered with Cisco Untied Communications Manage.
  • E. verify that the transcoder is running the latest firmware anDFlash NVRAM

Answer: AD

NEW QUESTION 11
Which three statements about SAF forwarding are true? (Choose three.)

  • A. It supports DNS and IP addresses.
  • B. The SAF Forwarder configuration can be updated without connecting to Cisco Unified Communications Manager.
  • C. It requires the SAF Forwarders to use the same configuration as the IOS switch.
  • D. It is supported on IPv4 only.
  • E. It is supported on IPv6 only.
  • F. It requires a unique IP address for each SAF Forwarder.

Answer: ABF

NEW QUESTION 12
During ABusiness-to-business video call through the Cisco Expressway solution, the internal endpoint can call out to the remote endpoint on the Internet, but it does not receive audio or video. The remote endpoint receives both audio and video. What is causing the issue?

  • A. The Cisco Expressway does not have a Rich Media Session license.
  • B. The firewall is blocking SIP signaling.
  • C. The Cisco Unified Communications Manager is not configureDFor business-to-business calling.
  • D. The firewall is blocking inbound RTP ports.
  • E. The Advanced Networking option is not installed on the Expressway Edge.

Answer: D

NEW QUESTION 13
You are receiving complaints of pixilation, smearing, and pulsing of video calls between two offices that are connected by a WAN. Assuming that QoS is implemented on the WAN connection, which classification should you use to mark the video traffic, according to the Cisco QoS baseline?

  • A. CS6
  • B. CS2
  • C. AF41
  • D. AF31
  • E. EF
  • F. CS3

Answer: C

NEW QUESTION 14
What does this trace indicate? Refer to the exhibit.
300-080 dumps exhibit

  • A. a disconnected call
  • B. a Completed call setup
  • C. a failed call setup
  • D. an interrupted call setup

Answer: B

NEW QUESTION 15
Refer to the exhibit.
300-080 dumps exhibit
Calls from Phone 1 (85541234), which is registered to Cluster A, are failing to Phone 2 (84431234), which is registered to Cluster B. The exhibit was taken from Cluster B. What are two possible root causes for this problem? (Choose two.)

  • A. Cluster A is missing a route pattern to reach Cluster B.
  • B. A translation pattern is misconfigured on Cluster B.
  • C. The calling search space on the Cluster A SIP trunk is misconfigured
  • D. Cluster B is missing a route pattern to reach Cluster A
  • E. Incoming calling search space on the Cluster B SIP trunk is misconfigured.

Answer: AC

NEW QUESTION 16
Which two tasks are performed by the RAS signaling function of H.225.0? (Select two.)

  • A. Performs bandwidth changes.
  • B. Transports audio messages between endpoints.
  • C. Performs disengage procedures between endpoints and a gatekeeper.
  • D. Allows endpoints to create connections between call agents.

Answer: AC

NEW QUESTION 17
Refer to the exhibit.
300-080 dumps exhibit
In this CUCM dial-plan, a localized translation pattern 9.1[2-9]XX[2-9]XXXXXX is configured in the Calling Search Space named LongDistance_CSS. This Translation Pattern is used to globalize the User’s dialed digits followed by matching a/+! Route Pattern as seen in the Exhibit. Users with Devices/Lines assigned to the LongDistance_CSS are reporting their calls are not proceeding until after the inter-digit timeout of 15 seconds. For example, after dialing digits 915555678309 the user does not hear ringback until after 15 seconds. What two reasons could lead to this inter-digit timeout condition? (Choose two.)

  • A. Route Pattern Call Classification set to OffNet.
  • B. Route Pattern does not have “Allow Overlap Sending” checked
  • C. Translation Pattern has “Provide Outside Dial Tone” checked
  • D. Translation Pattern does not have “Urgent Priority” checked
  • E. Route Pattern does not have “Urgent Priority” checked

Answer: DE

P.S. Surepassexam now are offering 100% pass ensure 300-080 dumps! All 300-080 exam questions have been updated with correct answers: https://www.surepassexam.com/300-080-exam-dumps.html (219 New Questions)