Actualtests 300-180 Questions are updated and all 300-180 answers are verified by experts. Once you have completely prepared with our 300-180 exam prep kits you will be ready for the real 300-180 exam without a problem. We have Updated Cisco 300-180 dumps study guide. PASSED 300-180 First attempt! Here What I Did.
Online 300-180 free questions and answers of New Version:
NEW QUESTION 1
Refer to the exhibit.
The server port connected to the NPV edge switch does not come online. Which action should fix the problem?
- A. Move the NP ports on the NPV edge and the F ports on the NPIV into the same VSAN 99.
- B. Move the NP ports on the NPV edge and the F ports on the NPIV in the default VSAN 1.
- C. Move all the ports into VLAN 1.
- D. Move all the ports into VSAN 99.
- E. Move all the ports into VLAN 99.
Answer: A
NEW QUESTION 2
Refer to the exhibit.
SAN-SW-1has failed and must be replaced. Your client reports that all servers are booting from storage array 2 even through storage array 1 is up and reachable by Cisco UCS infrastructure. Which reason is the root cause of the boot anomaly?
- A. SAN target primary under SAN primary must be changed to SAN target secondary under SAN secondary.
- B. San target primary under San secondary must be changed to SAN target secondary under SAN secondary.
- C. SAN target primary under SAN secondary must be changed to SAN target secondary under SAN primary.
- D. SAN target secondary must be added to primary and SAN secondary.
Answer: D
NEW QUESTION 3
The Cisco Nexus 2248 FEX has been added recently to the network via a vPC to the Nexus 5000 switches; however, connectivity is not yet operational. What is the problem with the configuration?
- A. Both Nexus 5000 switches must associate to the same FEX number
- B. Each Nexus 5000 should have its own FEX to support a straight-through topology.
- C. The maximum number of links for pinning purposes should be increased to 2.
- D. Ethernet1/18 must be configured without a port channel.
Answer: D
NEW QUESTION 4
Which occurrence happens during an ISSU in a single supervisor configuration?
- A. The control plane is offline for up to 300 seconds
- B. NTP sessions stay alive and active.
- C. FLOGI/fdisc or logo requests from servers fail until the ISSU is complete.
- D. The time-to-live value tor CDP is increased (360 seconds) if it is less than the recommended timeout value.
Answer: C
NEW QUESTION 5
You are using the CISCO ACI programmatic features and you receive this error message from the REST API Token Was invalid (Error: Token timeout)
Which option is a possible cause Of the error?
- A. The REST API requires that a login is refreshed
- B. The header or request sent to the web server IS malformed such that the request cannot be parsed by the web server
- C. The HTTP port is disabled on the Cisco APICs and HTTPS is enabled
- D. The CISCO APIC fails to resolve the distinguished name.
Answer: A
NEW QUESTION 6
Refer to the exhibit.
When suspending or deleting VSANs, which three statements are true? (Choose three.)
- A. You can delete only one VSAN at a time.
- B. You must wait 60 seconds after you enter the vsan suspend command before you enter another command.
- C. You must wait 120 seconds after you enter the vsan suspend command before you enter another command.
- D. You can unsuspend only one VSAN at a time.
- E. You can delete multiple VSANs as long as they are in the same domain.
- F. You can delete multiple VSANs as long as they are in the same zone.
Answer: ABD
NEW QUESTION 7
Which two of the following describe the correct requirements for non-disruptive ISSU on Cisco Nexus 7000 Series Switches? (Choose two.)
- A. updated kickstart and system images may be staged in bootflash on single-supervisor switches
- B. updated kickstart and system images may be staged in bootflash on dual-supervisor switches
- C. updated kickstart and system images may be staged remotely on single-supervisor switches
- D. dual supervisors
- E. clock synchronization
Answer: AD
NEW QUESTION 8
Which two of these would cause two switch fabrics not to merge? (Choose three.)
- A. The switches do not have at least one assigned domain ID in common.
- B. Two switches have different assigned VSANs on the connecting ports.
- C. The switches have different assigned VLANs on the connecting ports.
- D. The static domain ID does not override the dynamic ID.
- E. The election of the static domain is only determined by the WWNs of the two switches.
Answer: BC
NEW QUESTION 9
Refer to the exhibit.
You are troubleshooting a Cisco FabricPath anycast HSRP configuration issue What is the cause of the issue?
- A. L1 and L2 would not be connected.
- B. The switch ID that is used in each switch configuration must be different.
- C. The priority for S1 and S2 is the same in each switch configuration.
- D. HSRP version 2 must be used with HSRP any cast.
Answer: D
NEW QUESTION 10
You install a new DIMM in a Cisco UCS C-Series standalone rack server and that DIMM is not recognized by the server. What actions do you take to troubleshoot the problem? (Choose two)
- A. Remove an old DIMM from the blue memory slot and install the new DIMM there.
- B. Verify that the DIMM has been qualified to work on Cisco UCS servers.
- C. Return the DIMM for a new replacement.
- D. Remove and dispose of the bad DIMM.
- E. Verify that the DIMM is in a slot that supports an active CPU.
Answer: BD
NEW QUESTION 11
Refer to the exhibit.
Customer is having problems with a device in VLAN100? What would fix the problem?
- A. Move the trunk port into VSAN 100.
- B. Change interface fc1fc1/1 into a trunk port and remove VSAN 100.
- C. Change interface fc2/4 into a trunk port.
- D. Change interface fc2/4 into VSAN 100.
- E. Change interface fc1fc1/2 into VSAN 100.
Answer: D
NEW QUESTION 12
Which tools can assist in the troubleshooting of FC-0 issues? (Choose three.)
- A. FC analyzer
- B. SPAN
- C. Device Manager
- D. show interface fc1/1 optical-power-budget
- E. PAA
- F. a portable protocol analyzer
Answer: ACF
NEW QUESTION 13
Which statement is true regarding the admin VDC?
- A. All licensed features and feature sets must be enabled from the admin VDC.
- B. Fabric extenders connected to the admin VDC must be statically pinned.
- C. Only the mgmt 0 interface is allocated to the admin VDC.
- D. All interfaces other than mgmt 0 are allocated to the default VDC.
- E. The admin context can only be created on Supervisor 2/2E.
- F. The admin VDC is a new feature in Cisco NX-OS version 6.0.
Answer: C
NEW QUESTION 14
Refer to the exhibit.
You have fabric interconnects. You discover that all traffic flows through a fabric interconnect named fabric-interconnect B.
Which of the following could cause the issue?
- A. An administrator evacuated fabric-interconnect A.
- B. There is a version mismatch between the fabric interconnects.
- C. An administrator assigned an invalid OOBP IP address to fabric-interconnect B.
- D. the fabric interconnects have duplicate IP address.
Answer: A
NEW QUESTION 15
The external routes are unreachable from the fabric in a Cisco ACI environment. What should you do?
- A. Configure BGP for IPv6
- B. Configure BGP confederation.
- C. Apply the BGP policy map to the interface.
- D. Enable MP-BGP in the fabric.
Answer: D
NEW QUESTION 16
A customer is troubleshooting FCoE in its network and sees pause counters increasing when it runs the command show interface eth1/5. What is the cause of this?
- A. The CNA connected to the switch is sending Xon or Xoff PFC frames.
- B. The HBA connected to the switch is sending Xon or Xoff PFC frames.
- C. Pause counters increase regularly; there is nothing to be concerned about.
- D. A firmware upgrade on the Fibre Channel adapter that is connected to the switch will fix this issue.
Answer: A
NEW QUESTION 17
Refer to the exhibit.
You configure a vPC between two Cisco Nexus 7000 Series switches but the peer link will not come up. What is the problem?
- A. The configuration is correc
- B. The problem lies elsewhere.
- C. The vPC domain numbers must be different.
- D. The role priority must be the same.
- E. The system priority must be the same.
Answer: D
NEW QUESTION 18
Refer to the exhibit.
No OSPF neighborship exists between N5K-1 and N7K-1. Which configuration resolves this issue?
- A. (config)# router ospf 1(config-router)# network 192.168.103.152 255.255.255.252 area 0
- B. (config)# ip router ospf 1 area 0
- C. (config)# router ospf 1(config-router)# network 192.168.103.152 0.0.0.3 area 0
- D. (config-rf)# ip router ospf 1 area 0
Answer: A
NEW QUESTION 19
Refer to the exhibit.
What should you do to release the lock on the device alias database?
- A. Change the device alias mode to enhanced.
- B. Ensure that the zone alias is configured.
- C. Disable the fabric distribution.
- D. Commit the pending changes
Answer: D
NEW QUESTION 20
Refer to the output. feature otv
otv site-vlan 2
otv site-identifier 256
!
interface ethernet 2/0
ip address 192.0.2.1/24 ip igmp version 3
!
interface ethernet 2/1 ip address 192.0.2.2/24 ip igmp version 3
!
interface Overlay1
otv control-group 239.1.1.1 otv join-interface ethernet 2/0 otv extend-vlan 3-100
!
interface Overlay2
otv control-group 239.1.1.1 otv join-interface ethernet 2/1 otv extend-vlan 101-115
Which command best represents where the control plane configurations are applied?
- A. switch(config-if-overlay)# otv isis hello-interval 30
- B. switch(config-if)# otv isis hello-interval 30
- C. switch(config-vlan)# otv isis hello-interval 30
- D. switch(config)# otv isis hello-interval 30
Answer: A
NEW QUESTION 21
Refer to the exhibit.
You are configuring a FCoE VDC on a Cisco Nexus 7000 Series Switch. You are required to identity compatible QoS policies for the FCoE VDC. Drag and drop the QoS policy names on the left to their correct compatibility categories on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 22
Refer to the exhibit.
You have an EPG named SQL_SERVERS that must be assigned to virtual machines. The SQL_SERVERS EPG fails to appear as a port group on the VMware vSphere web client Other EPGs appear as port groups on the vSphere web client Which action do you take to resolve the issue?
- A. Associate the SQL_SERVERS EPG to the VDS01 VMM domain
- B. Create the SQL_SERVERS port group in the APIC GUI.
- C. Place the SQL_SERVERS EPG under quarantine untill it is first used.
- D. Create the SQL SERVERS port group on the vSphere web client.
Answer: B
NEW QUESTION 23
Which statement is true regarding LACP configuration?
- A. With LACP, you can bundle up to 16 interfaces in a channel group.
- B. LACP configuration is global and can be only configured by admin.
- C. After removing LACP configuration, you need to reboot the device.
- D. You can disable LACP while any LACP configurations are present.
Answer: A
NEW QUESTION 24
A customer calls you to report that it receives an error when entering the pinning max-links 4 command in FEX configuration mode on its Cisco Nexus 5596T Switch. Which of these is a likely cause for this condition?
- A. The FEX fabric interface is down.
- B. The transceiver is incorrect.
- C. A fabric interface is in a port channel.
- D. The fabric interface switchport mode is set to Access.
- E. Only two fabric interfaces are connected.
Answer: C
NEW QUESTION 25
Refer to the exhibit. After a boot policy is added, the profile stops working, which option is a possible cause of the issue?
- A. An iSCSI adapter is being on top of the vNIC
- B. Both of the adapters from the fabric A and fabric B must be specified
- C. The name of the adapter is incorrect
- D. The boot target does not exist
Answer: A
NEW QUESTION 26
......
100% Valid and Newest Version 300-180 Questions & Answers shared by 2passeasy, Get Full Dumps HERE: https://www.2passeasy.com/dumps/300-180/ (New 269 Q&As)
