Cisco 200-150 Answers 2021

NEW QUESTION 1

Refer to the exhibit.

Which two statements accurately describe the hosts, storage systems, and zones in the storage architecture'? (Choose two.)

• A. H3 resides in only one zone
• B. H3 cannot access storage systems S1 and S2
• C. Zone 2 restricts data on S3 so that only H3 can access that data
• D. Zone 1 and Zone 2 cannot belong to the same zone set
• E. Zone 1 provides access from all three hosts to storage systems S1 and S2

Answer: CE

NEW QUESTION 2

Which premise-based conferencing solution works with Conductor, TMS and WebEx to create CMR Hybrid solutions?

• A. MSE8000
• B. Cisco Meeting Server
• C. Spark
• D. TelePresence Server

Answer: B

NEW QUESTION 3

Refer to the exhibit.

What is the result when you run the command?

• A. All switches in the fabric receive the active zone set.
• B. The zone set is activated on the switch only.
• C. On the reboot, all switches in the fabric receives the active zone set.
• D. The default zone set is activated on all switches in the fabric.

Answer: B

NEW QUESTION 4

Which two descriptions of NPV are true? (Choose two.)

• A. It must be configured on all hosts that connect to the NPV switch.
• B. lt reduces the number of domain IDs in a fabric.
• C. It combines locally connected N Ports into a single uplink.
• D. It assigns multiple Fibre IDs to a single Port.
• E. It is deployed to a VM by using Cisco UCS Manager.

Answer: BD

NEW QUESTION 5

Refer to the exhibit.

Which description of the configuration is true?

• A. Host 10.1.1.1.2 in the network operator group.
• B. Host 10.1.1.1.2 can access both communities
• C. Host 10.1.1.1 can access the ABC community only.
• D. Host 10.1.1.1 can access both communities.

Answer: D

NEW QUESTION 6

An engineer is configuring a new MDS switch. The switch is powered on, the customer connects to the console, and the initial setup script is started.
Which two items can be configured during this setup process?

• A. default port-channel mode
• B. default port VSAN membership
• C. default switch port interface state
• D. default zone mode
• E. default storage VDC

Answer: CD

NEW QUESTION 7

What is a function ofa conferencing solution?

• A. To join 3 or more participants in a meeting.
• B. To provide an audio and video interface for the user.
• C. To schedule calls.
• D. To act as a traffic cop for network communication

Answer: A

NEW QUESTION 8

What are two features of a bridge? (Choose two.)

• A. Reliable transmission
• B. Operate at OSI Layer 2
• C. Operate at OSI Layer 3
• D. Create multiple broadcast domains
• E. Create multiple collision domains
• F. Flood input packets to all ports
• G. Drop IP packets with invalid destination ports

Answer: BE

Explanation:
"- a bridge is a two interfaces device that creates 2 collision domains, since it forwards the traffic it receives from one interface only to the interface where the destination layer 2 device (based on his mac address) is connected to. A bridge is considered as an "intelligent hub" since it reads the destination mac address in order to forward the traffic only to the interface where it is connected"
https://learningnetwork.cisco.com/thread/1734

NEW QUESTION 9

Which situation results in a flashing blue status LED on a Cisco Nexus 7000 switch I/O module?

• A. The switch has just been powered on, and the module is resetting.
• B. The module is resetting and both ejector levers are out.
• C. The module has been inserted during the initialization process.
• D. The module could not power up because of insufficient power.
• E. The operator has activated this LED to identify this module in the chassis.

Answer: E

NEW QUESTION 10

What protocol is used by TMS when a system cannot be contacted using SNMP?

• A. H.245
• B. https
• C. H 239
• D. TIP

Answer: B

NEW QUESTION 11

Which statement is true regarding Subzones?

• A. Endpoints are assigned to aparticular Subzone by their alias or IP subnet
• B. Subzones require the use of endpoint authentication.
• C. Endpointsrequire the use of other endpoints tor authentication
• D. Subzones are used for routing calls to peers in other parts of the network

Answer: A

NEW QUESTION 12

A network engineer is changing the boot process of a router from its original state to one that boots from ROMMON. Which option in Cisco IOS should be changed?

• A. config register number
• B. RMON
• C. bootflash settings
• D. terminal history

Answer: A

NEW QUESTION 13

Which is a feature available in Expressway version 8.9?

• A. The ability to register desktop phones
• B. Global phone books
• C. SRST redundancy
• D. The ability to register video endpoints

Answer: D

NEW QUESTION 14

Which device would you select to partition a network into VLANs?

• A. repeater
• B. bridge
• C. switch
• D. router
• E. hub

Answer: C

NEW QUESTION 15

Before you configure an SVI on a Cisco Nexus Series switch, which command must you enter?

• A. Feature pim
• B. feature ospf
• C. feature interface-vlan
• D. feature private-vlan

Answer: C

NEW QUESTION 16

Whichtype of API is used to configure settings on the Cisco Meeting Server?

• A. XML-RPC
• B. SOAP
• C. REST
• D. XMP-RPC

Answer: C

NEW QUESTION 17

Which command set creates an access control list on a Cisco Nexus switch to deny only FTP traffic from any source to destination host 10.10.10.110?

• A. N5K-A(config)# Ip access-list 101N5K-A(config-acl)# deny judp any host 10.10.1.110. eq 21 N5K-A(config-acl)# permit ip any any
• B. N5K-A(config)# Ip access-list 101N5K-A(config-acl)# deny judp any host 10.10.1.110. eq ftp
• C. N5K-A(config)# deny tcp any host 10.10.1.110. eq ftpN5K-A(config)# access-list 101deny Ip any any
• D. N5K-A(config)# Ip access-list 101N5K-A(config-acl)# deny tcp any host 10.10.1.110. eq 21 N5K-A(config-acl)# permit Ip any any

Answer: D

NEW QUESTION 18

What describes how the 802.1Q protocol lactates the transmission of multiple Layer 2 networks on a single link?

• A. adds 802.1Q tag information between the source MAC address and the Ether Type/Length fields
• B. encapsulates the frame inside an 802.1Q tunnel
• C. adds 802.1Q tag information between the preamble and the destination MAC address
• D. encapsulates the packet inside an 802.1Q tunnel
• E. transparently directs packets based on 802.1Q tags inside the header

Answer: A

Explanation:
EEE 802.1Q uses an internal tagging mechanism which inserts a 4-byte tag field in the original Ethernet frame itself between the Source Address and Type/Length fields
http://www.cisco.com/c/en/us/support/docs/lan-switching/8021q/17056-741-4.html#topic2

NEW QUESTION 19

Which two protocols are associated with the link layer of the OSI reference model? (Choose two)

• A. VTP
• B. SSH
• C. CDP
• D. BGP
• E. DNS

Answer: BD

NEW QUESTION 20

Which statement about VIP is true?

• A. There is a misconfiguration ; only one device running device running in server mode per domain is allowed
• B. 5K-2 is configured in server mode
• C. 7k-3 configuration in client mode
• D. Configuration a VLAN on 5K-1 would not be allowed, since 5k-1 is in client mode
• E. configuration a VLAN on 5k-2 would be allowed, but the VLAN would not be learned by the other devices in the domain DCICN

Answer: A

NEW QUESTION 21

What is the command sequence to force a Cisco Nexus 6000 switch to boot using the golden BIOS image?

• A. Press Ctrl-Shift-6 within 30 seconds of when power is supplied to the switch.
• B. Press Ctrl-] within 2 seconds of when power is supplied to the switch.
• C. Press Ctrl-] within 30 seconds of when power is supplied to the switch.
• D. Press Ctrl-Shift-6 within 2 seconds of when power is supplied to the switch.

Answer: D

NEW QUESTION 22

Which type of media uses electromagnetic waves that are generated by lasers, is often used in campus backbones, and is capable of transmitting to a distance of 60 kilometers?

• A. shielded twisted-pair cable
• B. coaxial cable
• C. multimode fiber-optic cable
• D. single-mode fiber-optic cable

Answer: C

NEW QUESTION 23

What is the minimum number of disks that are needed in RAID 1?

• A. 4 disks
• B. 2 disks
• C. 8 disks
• D. 16 disks

Answer: B

NEW QUESTION 24

Which router type is the most trustworthy for a Cisco routing device?

• A. EIGRP dynamic
• B. static
• C. BGP dynamic
• D. OSPF dynamic

Answer: A

NEW QUESTION 25

Which two addresses are valid in the data layer of the OSI reference model? (Choose two.)

• A. 10. 1.1.1
• B. 00:00:0C:5C: 5E: A2: F3
• C. 34:75:10:88:5A
• D. Fe80::88a1: 74f0:78748b51:1919
• E. 2001:0db8:85a3::8a2a:0370:7334

Answer: BC

NEW QUESTION 26

What is known as the User Policy?

• A. Call Policy
• B. Authentication
• C. Me
• D. Admin Policy

Answer: C

NEW QUESTION 27

Which list contains the different methods of authorization that are used by AAA?

• A. T ACACS+, ACL, AD, Local, and RADIUS
• B. TACACS+, ACL, Local, and AD
• C. TACACS+, None, Local, and ACL
• D. TACACS+, None, Local, and RADIUS

Answer: A

NEW QUESTION 28

What is a unique feature of Expressway?

• A. Persistent content available to room participants.
• B. Message, meet and calling for cloud-based solutions.
• C. Advanced video routing on video-only networks.
• D. Support of unified communications with contact center

Answer: C

NEW QUESTION 29

Which two features must be licensed on a Cisco Nexus 5548UP Switch? (Choose two.)

• A. Virtual Port Channel
• B. Fibre Channel
• C. FabricPath
• D. iSCSI

Answer: BC

NEW QUESTION 30

Which two descriptions of a Fabricpath network are true? (Choose two.)

• A. A leaf node connects to servers.
• B. Leaf nodes can be Layer 3 devices.
• C. A spine node connects to other switch in the fabric.
• D. There is a spanning tree protocol running between leaf and spine switches
• E. A spine node connects to servers.

Answer: BD

NEW QUESTION 31
......