It is impossible to pass Cisco 300-610 exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Cisco 300-610 practice questions. You will get a surprising result by our Updated Designing Cisco Data Center Infrastructure (DCID) practice guides.
Online 300-610 free questions and answers of New Version:
NEW QUESTION 1
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 2
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
- A. Layer 3 interfaces can belong to multiple VRFs.
- B. VRF-Lite interfaces can be Layer 2.
- C. Overlapping IP addresses are permitted on different VRFs.
- D. Interfaces that belong to VRFs can be physical or logical.
- E. VRF-Lite interfaces support MPLS.
Answer: CD
NEW QUESTION 3
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
- A. All the VDC have the same out-of-band IP address.
- B. Each VDC has a dedicated out-of-band Ethernet management port.
- C. Each VDC has a unique out-of-band IP address from the same IP subnet.
- D. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
Answer: C
NEW QUESTION 4
Which orchestration tool should be used for the management and analytics of servers across multiple sites?
- A. Cisco Intersight
- B. Cisco Nexus Fabric Manager
- C. Cisco UCS Manager
- D. Cisco Data Center Network Manager
Answer: A
NEW QUESTION 5
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. FCoE protocol
- B. type of storage
- C. end-to-end oversubscription ratio
- D. N Port virtualization
Answer: C
NEW QUESTION 6
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. reduction in application performance
- B. distance limitations
- C. specific backup requirements
- D. potential data loss
Answer: D
NEW QUESTION 7
What is a design consideration when implementing FSPF?
- A. Routes are based on the domain ID.
- B. Routes are based on the distance vector protocol.
- C. FSPF runs only on F Ports.
- D. FSPF runs on a per-chassis basis.
Answer: A
NEW QUESTION 8
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. VPC+
- B. UDLD
- C. EVPN
- D. OSPF
Answer: C
NEW QUESTION 9
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. vPC
- B. virtual interface
- C. port channel
- D. physical port
Answer: B
NEW QUESTION 10
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. BGP ECMP
- B. Layer 4 to Layer 7 device package
- C. inline load-balancing device
- D. ITD
Answer: B
NEW QUESTION 11
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Push configuration updates immediately to servers.
- B. Enable clients to pull changes to configuration files.
- C. Enable clients to pull changes without installing an agent.
- D. Provide support for writing new modules in Python.
- E. Enable one-off infrastructure changes to be performed manually.
Answer: AB
NEW QUESTION 12
Which two configuration methods can be used to deploy QoS to Cisco MDS Series switches? (Choose two.)
- A. zone-based QoS
- B. multiple QoS policies that match individual devices
- C. VSAN-based QoS
- D. FCoE VLAN-based QoS
- E. multiple QoS policies that match multiple devices
Answer: AC
NEW QUESTION 13
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 14
Which two types of service profile templates does Cisco UCS support? (Choose two.)
- A. initial
- B. permanent
- C. updating
- D. temporary
- E. connected
Answer: AC
NEW QUESTION 15
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)
- A. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- B. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- C. The STP parameter configuration is unsupported.
- D. The STP parameter configuration is supported.
- E. STP runs on the server ports.
Answer: AC
NEW QUESTION 16
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
- A. BFD
- B. UDLD
- C. MCP
- D. LLDP
Answer: B
NEW QUESTION 17
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- B. Use the port-monitor command to detect slow drain devices.
- C. Configure the port channel to enable individual buffer-to-buffer credits.
- D. Configure the port monitor to allow categorization of a specific device as slow.
- E. Configure the flow control for the FC to use R_RDY.
Answer: BD
NEW QUESTION 18
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
- B. A separate DSCP value must be configured for all FCIP VSAN traffic.
- C. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
- D. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
Answer: D
NEW QUESTION 19
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)
- A. It propagates hosts reachability without support of traffic flooding.
- B. Layer 3 failures do not propagate beyond the OTV edge device.
- C. It extends the spanning tree between data centers.
- D. It is an open standard.
- E. It constrains HSRP hello messages to each data center.
Answer: BC
NEW QUESTION 20
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. IP redirects
- B. flow control
- C. proxy ARP
- D. HSRP
Answer: C
NEW QUESTION 21
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?
- A. border leaf
- B. service leaf
- C. border gateway
- D. service gateway
Answer: C
NEW QUESTION 22
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. number of vHBAs
- B. ARP entries
- C. UUID assignment
- D. VXLAN membership
- E. target server
Answer: AC
NEW QUESTION 23
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Cisco UCS Manager creates two separate fabric port channels.
- B. Cisco UCS Manager creates a single fabric port channel.
- C. The port channel is disabled until an administrator enables it manually.
- D. Each uplink that connects an IOM is configured as a discrete link.
Answer: A
NEW QUESTION 24
Drag and drop the technologies from the left onto the correct descriptions on the right.
- A. Mastered
- B. Not Mastered
Answer: A
Explanation: 
NEW QUESTION 25
......
100% Valid and Newest Version 300-610 Questions & Answers shared by Thedumpscentre.com, Get Full Dumps HERE: https://www.thedumpscentre.com/300-610-dumps/ (New 60 Q&As)
