Top Tips Of Refresh 350-801 Dumps Questions

we provide Top Quality Cisco 350-801 download which are the best for clearing 350-801 test, and to get certified by Cisco Implementing and Operating Cisco Collaboration Core Technologies. The 350-801 Questions & Answers covers all the knowledge points of the real 350-801 exam. Crack your Cisco 350-801 Exam with latest dumps, guaranteed!

Cisco 350-801 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LOAP Synchronized User in Cisco Unified Communications Manager. Which step is next to remove this user from Cisco Unified Communications Manager?

  • A. Delete the user directly from Cisco Unified Communications Manager
  • B. Restart the Dirsync service after the user is deleted from LDAP directory.
  • C. Execute a manual sync to refresh the local database and delete the end user.
  • D. Wait 24 hours for the garbage collector to remove the user.

Answer: B

NEW QUESTION 2
When a remote office location is set up with limited bandwidth resources, which codec carries the most voice calls?

  • A. G.711
  • B. G.722
  • C. G.723
  • D. G.729

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/media.html

NEW QUESTION 3
Which packet delay is the maximum supported between Cisco Unified Communications Manager nodes for clustering over WAN deployments?

  • A. 150 ms round tip
  • B. 510 ms round trip
  • C. 40 ms round trip
  • D. 80 ms round trip

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/callpros.html

NEW QUESTION 4
A customer wants a video conference with five Cisco TelePresence IX5000 Series systems. Which media resource is necessary in the design to fully utilize the immersive functions?

  • A. Cisco PVDM4-128
  • B. software conference bridge on Cisco Unified Communications Manager
  • C. Cisco Webex Meetings Server
  • D. Cisco Meeting Server

Answer: C

NEW QUESTION 5
An engineer encounters third-party devices that do not support Cisco Discovery Protocol. What must be configured on the network to allow device discovery?

  • A. LACP
  • B. TFTP
  • C. LLDP
  • D. SNMP

Answer: C

NEW QUESTION 6
A user reports transfer failure from an IP phone for calls received from a PSTN to another PSTN number. What is a reason for these failures?

  • A. The IP phone is configured with the wrong region.
  • B. The incoming calling search space of the SIP trunk does not include the partition of the line in the IP phone.
  • C. The service parameter related to Offnet to Offnet Call Transfer is set to TRUE.
  • D. The gateway is configured with the wrong device pool.

Answer: D

NEW QUESTION 7
An engineer is configuring a BOT device for a Jabber user in Cisco Unified Communication Manager Which phone type must be selected?

  • A. third-party SIP device
  • B. Cisco Dual Mode for iPhone
  • C. Cisco Dual Mode for Android
  • D. Cisco Unified Client Services Framework

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_D00D8CBD_00_deployment-installation-guide-cisco-jabber115/CJAB_BK_D00D8CBD_00_deployment-installation-guide- ciscojabber115_chapter_01000.html

NEW QUESTION 8
A Cisco TelePresence SX80 suddenly has issues displaying main video to a display over HDMI. Which command can you use from the SX80 admin CLI to check the video output status to the monitor?

  • A. xStatus Video Output
  • B. xCommand Video Status
  • C. xConfiguration Video Output
  • D. xStatus HDMI Output

Answer: C

NEW QUESTION 9
Which two types of device are supported by the Bulk Administration Tool? (Choose two.)

  • A. H.322 clients
  • B. Cisco Unified IP phones (all models)
  • C. SIP trunks
  • D. H.225 trunks
  • E. music on hold servers

Answer: AB

NEW QUESTION 10
A customer is deploying a SIP IOS gateway for a customer who requires that in-band DTMF relay is first priority and out-of-band DTMF relay is second priority. Which IOS entry sets the required priority?

  • A. dtmf-relay rtp-nte sip-notify B.dtmf-relay cisco-rtp
  • B. sip-notify dtmf-relay rtp-nte
  • C. dtmf-relay sip-kpml cisco-rtp

Answer: A

NEW QUESTION 11
When a user dials a number with a phone that is registered to the Cisco Unified Communications Manager, what is the default timeout before the number is sent?

  • A. 15 seconds
  • B. 5 seconds
  • C. 10 seconds
  • D. 3 seconds

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/13920-call-routing.html

NEW QUESTION 12
An engineer with troubleshoots poor voice quality on multiple calls. After looking at packet captures, the engineer notices high levels of jitter. Which two areas does the engineer check to prevent jitter? (Choose two.)

  • A. The network meets bandwidth requirements.
  • B. MTP is enabled on the SIP trunk to Cisco Unified Border Element.
  • C. Cisco UBE manages voice traffic, not data traffic.
  • D. All devices use wired connections instead of wireless connections.
  • E. Voice packets are classified and marked.

Answer: AE

Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/voice/voice-quality/20371-troubleshoot-qos-voice.html

NEW QUESTION 13
How does Cisco Unified Communications Manager perform a digit analysis on-hook versus off-hook for an outbound call from a Cisco IP phone that is registered to Cisco Unified CM?

  • A. On-hook, Unified CM performs a digit-by-digit analysis, off-hook, Unified GM considers all digits were dialed and does not wait for additional digits.
  • B. On-hook, Unified CM considers all digits were dialed and does not wait for additional digits, off-hook, Unified CM performs a digit-by-digit analysis.
  • C. On-hook, by pressing the digits and entering "#" to process the call, Unified CM performs a digit-by-digit analysis; off-hoo
  • D. Unified CM analyzes all digits as a string.
  • E. On-hook, no digit analysis is performed, off-hoo
  • F. Unified CM requires the “#* to start the digit analysis.

Answer: C

NEW QUESTION 14
An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user. Which type of provisioning can be configured on the endpoint?

  • A. CUBE
  • B. CMS
  • C. CUCM
  • D. Edge

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/desktop-collaboration-experience-dx600-series/datasheet-c78-731879.html

NEW QUESTION 15
Which transport protocol does the application layer protocol SNMP use?

  • A. XML
  • B. UDP
  • C. SIP
  • D. HTTP

Answer: B

Explanation:
Reference: https://www.geeksforgeeks.org/simple-network-management-protocol-snmp/

NEW QUESTION 16
Which description of the Mobile and Remote Access feature is true?

  • A. Collaboration Edge feature that enables remote individuals to perform international calls from Jabber with a VPN connection.
  • B. Collaboration Edge feature that enables remote individuals to access all enterprise collaboration services using a PC within the corporate environment.
  • C. Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber without the use of a VPN connection.
  • D. Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber with the use of a VPN connection.

Answer: C

NEW QUESTION 17
Which command in the MGCP gateway configuration defines the secondary Cisco Unified Communications Manager server?

  • A. mgcapp
  • B. ccm-manager fallback-mgcp
  • C. mgcp call-agent
  • D. ccm-manager redundant-host

Answer: B

NEW QUESTION 18
Which method is used to avoid toll fraud with Cisco Unified Communications Manager calls?

  • A. call policy service
  • B. TOLLFRAUD_APP
  • C. default zone access rules
  • D. class of service

Answer: D

NEW QUESTION 19
On which protocol and port combination does Cisco Prime Collaboration receive notifications (Traps and InformRequests) from several network devices in the Collaboration infrastructure for which it has requested notifications?

  • A. UDP 162
  • B. TCP 80
  • C. UDP 161
  • D. TCP 161

Answer: A

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/12-1/assurance/advanced/guide/cpco_b_cisco-prime-collaboration-assurance-guide-advanced-12-1/cpco_b_cisco-prime-collaboration-assurance- guideadvanced-12-1_chapter_01111.html

NEW QUESTION 20
Which wildcard must an engineer configure to match a whole domain in SIP route patterns?

  • A. .
  • B. !
  • C. @
  • D. *

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_0100111.html

NEW QUESTION 21
......

Recommend!! Get the Full 350-801 dumps in VCE and PDF From Dumps-hub.com, Welcome to Download: https://www.dumps-hub.com/350-801-dumps.html (New 0 Q&As Version)