The Up To The Immediate Present Guide To 350-801 Questions

NEW QUESTION 1
Which action prevent toll fraud in Cisco Unified Communication Manager?

• A. Configure ad hoc conference restriction
• B. Implement toll fraud restriction in the Cisco IOS router
• C. Allow off-net to off-net transfer
• D. Implement route patterns in Cisco Unified CM

Answer: A

NEW QUESTION 2
Which call flow matches traffic from a Mobile and Remote Access registered endpoint to central call control?

• A. Endpoint>Expressway-C>Expressway-E>Cisco UCM
• B. Endpoint>Expressway-E>Expressway-C> Cisco UCM
• C. Endpoint>Expressway-E> Cisco UCM
• D. Endpoint>Expressway-C> Cisco UCM

Answer: A

Explanation:
The call flow for a Mobile and Remote Access registered endpoint to central call control is as follows:
The endpoint registers with the Expressway-C.
The Expressway-C forwards the registration request to the Expressway-E.
The Expressway-E forwards the registration request to the Cisco UCM.
The Cisco UCM registers the endpoint.
When the endpoint places a call, the call flow is as follows:
The endpoint sends the call request to the Expressway-C.
The Expressway-C forwards the call request to the Expressway-E.
The Expressway-E forwards the call request to the Cisco UCM.
The Cisco UCM places the call.
The Expressway-C and Expressway-E are used to provide secure access to the Cisco UCM for endpoints that are not located on the corporate network. The Expressway-C is located on the corporate network, and the Expressway-E is located in the DMZ.

NEW QUESTION 3
According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4
On which protocol and port combination does Cisco Prime Collaboration receive notifications (Traps and InformRequests) from several network devices in the Collaboration infrastructure for which it has requested notifications?

• A. UDP161
• B. TCP 161
• C. UDP 162
• D. TCP 80

Answer: C

NEW QUESTION 5
An employee of company ABC just quit. The IT administrator deleted the employee’s user id from the active directory at 10 a m. on March 4th The nightly sync occurs at 10 p.m. daily. The IT administrator wants to troubleshoot and find a way to delete the user id as soon as possible How is this issue resolved?

• A. Wart until 10 pm on March 4th when the user is automatically removed from Cisco UCM.
• B. Wait until 10 pm on March 5th when the user is automatically removed from Cisco UCM.
• C. Wait until 3 15 a.
• D. on March 6th for garbage collection to remove the user from Cisco UCM.
• E. Wait until 315am on March 5th for garbage collection to remove the user from Cisco UCM.

Answer: C

NEW QUESTION 6
Refer to exhibit.

A company recently deployed CISCO Jabber Users log in to Jabber by using their email address in a domain named company com. The users report that they cannot register their telephony services when working from unless they use a VPN. An engineer runs DNS lookup tool in Cisco Expressway-C to troubleshoot tie What IS me cause of the issue?

• A. The company com domain must be resolved only in Expressway-E
• B. There is a missing SRV record for the company.com domain.
• C. The TTL value for the company.com is too short.
• D. There must be only response for the company.com domain

Answer: B

NEW QUESTION 7
What are two common attributes of XMPP XML stanzas? (Choase two.)

• A. from
• B. to
• C. destination
• D. version
• E. Source

Answer: AB

NEW QUESTION 8
An engineer is configuring Cisco Jabber for Windows and must implement desk phone control mode for some of the users. Which access control group must be configured for those users to enable this functionality?

• A. Allow Control of Device from CTI
• B. Standard CTI Secure Connection
• C. Standard CTI Enabled
• D. Standard CTI Allow Reception of SRTP Key Material

Answer: C

NEW QUESTION 9
Refer to the exhibit.

A customer wants the SIP 200 OK shown to advertise codecs in the following order:

After correcting the codec preferences. What should the audio payload show in the SIP Traces?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 10
An engineer deploys a Cisco Expressway-E server for a customer who wants to utilize all features on the server. Which feature does the engineer configure on the Expressway-E?

• A. H.323 endpoint registrations
• B. Mobile and Remote Access
• C. SIP gateway for PSTN providers
• D. VTC bridge

Answer: A

NEW QUESTION 11
Which Cisco Unified communications manager configuration is required for SIP MWI integration?

• A. Select “Redirecting Diversion Header Delivery— Inbound’ on the SIP trunk
• B. Enable “Accept presence subscription” on the SIP trunk security profile
• C. Select “Redirecting Diversion Header Delivery – outbound” on the SIP trunk
• D. Enable “Accept unsolicited notification” on the SIP Trunk security profile

Answer: D

NEW QUESTION 12
What is the major difference between the two possible Cisco lM and Presence high-availability modes?

• A. Balanced mode provides user load balancing and user failover in the event of an outag
• B. Active/standby mode provides an always on standbynode in the event of an outage, and it also provides load balancing.
• C. Balanced mode provides user load balancing and user failover only for manually generated failovers.Active/standby mode provides anunconfigured standby node in the event of an outage, but it does not provide load balancing.
• D. Balanced mode provides user load balancing and user failover in the event of an outag
• E. Active/standby mode provides an always on standbynode in the event of an outage, but it does not provide load balancing.
• F. Balanced mode does not provide user load balancing, but it provides user failover in the event of an outag
• G. Active/standby mode provides analways on standby node in the event of an outage, but it does not provide load balancing.

Answer: C

Explanation:
Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
Here is a more detailed explanation of the two modes:
Balanced mode: In balanced mode, the IM and Presence Service nodes are configured to work together to provide high availability. The nodes are configured in a redundancy group, and the system automatically balances the load of users across the nodes in the group. If one of the nodes fails, the system automatically fails over the users to the other nodes in the group.
Active/standby mode: In active/standby mode, one of the IM and Presence Service nodes is designated as the active node, and the other nodes are designated as standby nodes. The active node handles all of the user traffic, and the standby nodes are only used if the active node fails. If the active node fails, the system automatically fails over to one of the standby nodes.

NEW QUESTION 13
Refer to the exhibit.

A collaboration engineer configures Cisco UCM to act as a DHCP server. What must be done next to configure the DHCP server?

• A. Restart the Cisco DHCP Monitor Service under Cisco Unified Serviceability
• B. Add the new DHCP server to the primary DNS server
• C. Restart the TFTP service under Cisco Unified Serviceability.
• D. Add a DHCP subnet to the DHCP server under Cisco UCM Administration.

Answer: D

NEW QUESTION 14
In which location does an administrator look to determine which subscriber the phone registers to if loses registration with the current Cisco UCM subscriber?

• A. On Cisco UCM Administration Page Device > Phone > Phone Configuration page
• B. On Cisco UCM Administrator Page server > Cisco UCM
• C. On Cisco UCM Administrator page system > Device Pool > Cisco UCM group
• D. On Cisco UCM Administrator page system > Enterprise Parameters

Answer: C

NEW QUESTION 15
Where in Cisco UCM is restrictions on audio bandwidth configured?

• A. location
• B. partition
• C. region
• D. serviceability

Answer: C

NEW QUESTION 16
Refer to the exhibit.

A customer submits this debug output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with an ISDN BRI interface, which BRI changes resolve the issue?

• A.
• B.
• C.
• D.

Answer: C

NEW QUESTION 17
Which actions required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?

• A. The traversal zone on Expressway-c points to Expressway-e through the peer address field on the traversal zone, which specifies the Expressway-e server addres
• B. For dual NIC deployments, set the Expressway-e address using an FQDN that resolves the IP address of the internal interface
• C. The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443; XMPP TCP 5222; media: UDP 36002 to 59999
• D. Do not use a shared address for Expressway-e and Expressway-c, as the firewallcannot distinguish between the
• E. If static NAT for IP addressing on Expressway-e is used, ensure that any NAT operation on expressway-c does not resolve the same traffic IP addres
• F. Shared NAT IS not supported
• G. The internal firewall must allow these inbound and outbound connections between expressway - c and Expressway-e :sip;HTTPS(tunneled over SSH between C and E.TCP 2222: TCP 7001: Traversal Media: UDP 2776 to 2777(or 36000 to 36011 for large VM/appliance);XMPP:TCP 7400

Answer: B

NEW QUESTION 18
A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series. The IPv4 address of the phone is reachable via ICMP and HTTP, and the phone is registered to Cisco UCM However the engineer cannot reach the CU of the phone Which two actions in Cisco UCM resolve the issue? (Choose two)

• A. Enable SSH Access under Product Specific Configuration Layout in Cisco UCM
• B. Disable Web Access under Product Specific Configuration Layout in Cisco UCM
• C. Set a username and password under Secure Shell information in Cisco UCM
• D. Enable Settings Access under Product Specific Configuration Layout in Cisco UCM
• E. Enable FIPS Mode under Product Specific Configuration Layout in Cisco UCM

Answer: AB

NEW QUESTION 19
Which two steps should be taken to provision a phone after the Self-Provisioning feature was configured for end users? (Choose two.)

• A. Ask the Cisco UCM administrator to associate the phone to an end user.
• B. Plug the phone into the network.
• C. Dial the hunt pilot extension and associate the phone to an end user
• D. Dial the self-provisioning IVR extension and associate the phone to an end user.
• E. Enter settings menu on the phone and press * ,*,# (star, star, pound).

Answer: BD

NEW QUESTION 20
......