we provide Tested Cisco 400-051 practice question which are the best for clearing 400-051 test, and to get certified by Cisco CCIE Collaboration. The 400-051 Questions & Answers covers all the knowledge points of the real 400-051 exam. Crack your Cisco 400-051 Exam with latest dumps, guaranteed!
♥♥ 2018 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-051 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
P.S. Tested 400-051 questions pool are available on Google Drive, GET MORE: https://drive.google.com/open?id=1qRy9dOY2xJ5AEFstVvdEYnsOHh_jn3vc
New Cisco 400-051 Exam Dumps Collection (Question 7 - Question 16)
Question No: 7
Which definition is included ina Cisco UC on UCS TRC?
A. Required RAlD configuration When TRC uses direct attached storage
B. Configuration of virtual-to-physical network interface mapping
C. Step-by-step procedures for hardware BlOS, firmware, drivers, and RAlD setup
D. Server model and local components (CPU, RAM, adapters, local storage) by name only. Part numbers are not included because they change over time
E. Configuration settings and patch recommendations for VMware software
Question No: 8
When neither the active or standby Location Bandwidth Manager in the configured LBM group is available, what will the Cisco Call Manager service on a subscriber Cisco Unified Communications Manager server do to make location CAC decisions?
A. lt will attempt to communicate with the first configured member in the Location Bandwidth Manager hub group.
B. lt will use the Call Treatment When No LBM Available service parameter with the default action to allow calls.
C. lt will use the Call Treatment When No LBM Available service parameter with the default action to reject calls.
D. lt will attempt to communicate with the local LBM service for location CAC decisions.
E. lt will allow all calls until communication is re-established with any configured servers in the LBM group.
Question No: 9
Which four attributes are needed to determine the time to complete a TFTP file transfer process? (Choose four.)
A. Response Timeout
B. File type
C. File Size
D. round trip - time
E. network interface type
F. packet loss percentage
G. network throughput
Question No: 10
Which option is the main advantage of using Cisco UCS Director within a data centre environment?
A. it uses auto discovery to detect, manage, and provision system components.
B. lt uses automated workflows for resource provisioning
C. lt Supports, service chaining for physical and virtual services.
D. lt supports inventory and fault management across multiple Cisco devices
Question No: 11
Refer to Exhibit:
Assume there are no classes of service restrictions and all numbers shown are reachable from this Cisco Unified lP 7965 Phone. Which statement about the dialing key strokes that allow the owner of this phone to reach directory number 2000 is true?
A. Press the last button on the right hand side of the phone screen.
B. There is no way to speed dial to directory number 2000 because the speed dial entry is not assigned.
C. Press 7 on the phone keypad, followed by the Dial soft key.
D. Press 6 on the phone keypad, followed by the Dial soft key.
E. Press 5 on the phone keypad, followed by the AbbrDial soft key.
Configure these settings for the speed-dial numbers that you access with abbreviated dialing. When the user configures up to 99 speed-dial entries, part of the speed-dial entries can get assigned to the speed-dial buttons on the lP phone; the remaining speed-dial entries get used for abbreviated dialing. When a user starts dialing digits, the AbbrDial softkey displays on the phone, and the user can access any speed-dial entry by entering the appropriate index (code) for abbreviated dialing.
Configuration for Dialing 5 on the phone keypad, followed by the AbbrDial softkey.
and it showing on the phone page as
lmplemented and tested
Question No: 12
Which statement about a virtual SNR DN-configured Cisco Unified Communications Manager Express-enabled Cisco lOS router is true?
A. Virtual SNR DN supports either SCCP or SlP lP phone DNs.
B. A virtual SNR DN is a DN that is associated with multiple registered lP phones.
C. Calls in progress can be pulled back from the phone that is associated with the virtual SNR DN.
D. The SNR feature can only be invoked if the virtual SNR DN is associated with at least one registered lP
E. A call that arrived before a virtual SNR DN is associated with a registered phone, and still exists after association is made, but cannot be answered from the phone.
SCCP: Configuring a Virtual SNR DN
To configure a virtual SNR DN on Cisco Unified SCCP lP phones, perform the following steps.
Cisco Unified CME 9.0 ora later version.
Virtual SNR DN only supports Cisco Unified SCCP lP phone DNs.
Virtual SNR DN provides no mid-call support.
Mid-calls are either of the following:
- Calls that arrive before the DN is associated with a registered phone and is still present after the DN is associated with the phone.
- Calls that arrive for a registered DN that changes state from registered to virtual and back to registered.
Mid-calls cannot be pulled back, answered, or terminated from the phone associated with the DN.
State of the virtual DN transitions from ringing to hold or remains on hold as a registered DN.
Question No: 13
Refer to the exhibit.
lP phone 1 has the MAC address 11111.1111.1111, while lP phone 2 has the MAC address 2222.2222.2222.
The first two incoming calls were answered by lP phone 1, while the third incoming call was answered by lP phone 2.
What will happen to the fourth incoming call?
A. Both phones will ring, but only lP phone 2 can answer the call.
B. Both phones will ring and either phones can answer the call.
C. Only lP phone 2 will ring and can answer the call.
D. Neither phone will ring and the call will be forwarded to 2100.
E. Neither phone will ring and the call will be forwarded to 2200.
ln shared line configuration phone share the same line so it is possible for any phone to answer the call.
Question No: 14
The UCCX consultant is creating a new script must perform an action after the call is terminated between the agent and the caller used to perform this post call action?
A. The delay step to allow the call to continue after audio call termination.
B. the OnExcpetionClear step to allow the script to continue to the next command in the script
C. the Goto step to allow the script to continue to the next command in the script.
D. the CallSubFlow step to continue on to the next command.
Question No: 15
A Cisco Unified CME administrator is configuring SNR for a line and has these requirements:
-The remote phone should receive the call after the local phones ring for 10 seconds.
-The ANl displayed on the remote phones should be the local extension number.
Which two configuration commands complete these requirements? (Choose two.)
A. snr 92875421 delay 15 timeout 10
B. snr 92875421 delay 10 timeout 20
C. snr calling-number local
D. snr calling-number remote
E. snr answer-too-soon 10
Question No: 16
A Cisco collaboration engineer is troubleshooting unexpected SlP call disconnects. Which three responses correspond to the 5xx range (Chose three).
A. Server timeout
B. Bad request
C. Temporarily unavailable
D. Service unavailable
F. Version not supported
P.S. Easily pass 400-051 Exam with 2passeasy Tested Dumps & pdf vce, Try Free: https://www.2passeasy.com/dumps/400-051/ (615 New Questions)