we provide Precise Cisco passleader 400 101 testing engine which are the best for clearing cisco 400 101 test, and to get certified by Cisco CCIE Routing and Switching (v5.0). The cisco 400 101 Questions & Answers covers all the knowledge points of the real cisco 400 101 exam. Crack your Cisco ccie 400 101 Exam with latest dumps, guaranteed!
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-101-exam-dumps.html
Q231. Which IPv6 tunneling mechanism requires a service provider to use one of its own native IPv6 blocks to guarantee that its IPv6 hosts will be reachable?
A. 6rd tunneling
B. automatic 6to4 tunneling
C. NAT-PT tunneling
D. ISATAP tunneling
E. manual ipv6ip tunneling
F. automatic 4to6 tunneling
Answer: A
Q232. Which two statements are true about RSTP? (Choose two.)
A. By default, RTSP uses a separate TCN BPDU when interoperating with 802.1D switches.
B. By default, RTSP does not use a separate TCN BPDU when interoperating with 802.1D switches.
C. If a designated port receives an inferior BPDU, it immediately triggers a reconfiguration.
D. By default, RTSP uses the topology change TC flag.
E. If a port receives a superior BPDU, it immediately replies with its own information, and no reconfiguration is triggered.
Answer: B,D
Explanation:
The RSTP does not have a separate topology change notification (TCN) BPDU. It uses the topology change (TC) flag to show the topology changes.
Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/swmstp.html
Q233. For which two conditions is Cisco Express Forwarding recursion disabled by default when the BGP Prefix Independent Convergence functionality is enabled? (Choose two.)
A. next hops learned with a /24 mask
B. next hops learned with any mask shorter than /32
C. next hops learned with a /32 mask
D. next hops that are directly connected
Answer: C,D
Explanation:
Recursion is the ability to find the next longest matching path when the primary path goes down. When the BGP PIC feature is not installed, and if the next hop to a prefix fails, Cisco Express Forwarding finds the next path to reach the prefix by recursing through the FIB to find the next longest matching path to the prefix. This is useful if the next hop is multiple
hops away and there is more than one way of reaching the next hop.
However, with the BGP PIC feature, you may want to disable Cisco Express Forwarding recursion for the following reasons:
. Recursion slows down convergence when Cisco Express Forwarding searches all the FIB entries.
. BGP PIC Edge already precomputes an alternate path, thus eliminating the need for Cisco Express Forwarding recursion.
When the BGP PIC functionality is enabled, Cisco Express Forwarding recursion is disabled by default for two conditions:
. For next hops learned with a /32 network mask (host routes)
. For next hops that are directly connected
For all other cases, Cisco Express Forwarding recursion is enabled.
Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-xe-3s-book/irg-bgp-mp-pic.html
Q234. Which three statements about GLBP are true? (Choose three.)
A. It uses a virtual MAC address that starts with 0007.b4.
B. It elects a single active virtual gateway to appoint and manage multiple active virtual forwarders.
C. It allows the configured virtual IP address to be used on a physical interface as well.
D. It uses a virtual MAC address that starts with 0070.4b.
E. It elects multiple active virtual gateways to appoint and manage a single active virtual forwarder.
F. Preemption is enabled for the configured active virtual gateway by default.
Answer: A,B,C
Explanation:
The virtual MAC address in GLBP is 0007.b400.xxyy where xx is the GLBP group number and yy is the different number of each gateway (01, 02, 03…). One of the routers in a GLBP group is elected as an AVG – Active Virtual Gateway. There is only one active AVG in a group, and its task is to respond to ARP requests sent to the virtual gateway IP address replying different virtual MAC addresses in response packets. GLBP allows the configured virtual IP address to be used on a physical interface. By default, the GLBP gateway preemptive scheme is disabled. A backup virtual gateway can become the AVG only if the current AVG fails, regardless of the priorities assigned to the virtual gateways.
Q235. Which three responses can a remote RADIUS server return to a client? (Choose three.)
A. Reject-Challenge
B. Access-Reject
C. Accept-Confirmed
D. Access-Accept
E. Access-Challenge
F. Reject-Access
Answer: B,D,E
Q236. A floating static route appears in the routing table of an interface even when the interface is unusable.
Which action can you take to correct the problem?
A. Remove the permanent option from the static route.
B. Correct the administrative distance.
C. Configure the floating static route to point to another route in the routing table.
D. Correct the DHCP-provided route on the DHCP server.
Answer: A
Q237. Which two statements about GLBP are true? (Choose two.)
A. Packets are forwarded by multiple routers that share one virtual IP address.
B. The active router forwards packets received on one virtual IP and MAC address.
C. The standby router forwards packets when the active router fails.
D. Hosts on the network are configured with multiple gateways for load balancing.
E. Routers in a GLBP group can share multiple virtual MAC addresses.
Answer: A,E
Q238. Which two options are signaling protocols that are used in MPLS? (Choose two.)
A. LDP
B. RSVP
C. BFD
D. LISP
E. CLNS
F. CDP
Answer: A,B
Explanation:
* Signaling is the means by which LSRs all along the path know that they are a part of a given LSP. It is a signaling function by which the LSR knows that the internal transit path for the LSP depicted goes from Interface 2 to Interface 4.
* Label distribution is the means by which an LSR tells an upstream LSR what label value to use for a particular LSP.
There are four protocols that can perform the label distribution function:
* Label Distribution Protocol (LDP)
* Resource Reservation Protocol with Traffic Engineering Extensions (RSVP-TE)
* Constraint-Based Routed LDP (CR-LDP)
* Multiprotocol BGP
LDP and RSVP-TE are the two most commonly used label distribution protocols
Reference: http://www.networkworld.com/article/2237487/cisco-subnet/understanding-mpls-label-distribution.html
Q239. Which configuration sets a minimum quality of service on a Layer 2 access switch?
A. mls qos cos override
mls qos cos 2
B. mls qos cos 2
C. mls qos trust cos
mls qos cos 2
D. mls qos trust cos
E. mls qos trust dscp
Answer: A
Explanation:
The mls qos cos override interface command must be used to ensure that untrusted CoS values are explicitly set 0 (default).
Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/Qo S-SRND-Book/QoSDesign.html
Q240. Refer to the exhibit.
Which command can you enter to resolve this error message on a peer router?
A. username <username> password <password>
B. ppp chap <hostname>
C. aaa authorization exec if-authenticated
D. aaa authorization network if-authenticated
Answer: A
